Flake-Shaped Nickel Hydroxide Supported on Carbon Cloth as an Electrochemical Sensor for Efficient Detection of Phosphate Under Neutral Conditions

Jiang-Hao Yu, Yuhan Hao, Xu Zhao, Feiyang Chen, Chun Zhao, Hui SuoSensors 2025 · DOI

TL;DR

Researchers have developed a novel, environmentally friendly electrochemical sensor for detecting phosphate in water under neutral conditions. This sensor, made from flake-shaped nickel hydroxide supported on carbon cloth, offers high sensitivity and a wide detection range, overcoming limitations of previous methods that required alkaline environments.

What Problem Does This Paper Address?

Phosphate is a crucial element in ecosystems, but its excess can lead to eutrophication, while its deficiency can hinder biological processes. Accurate and accessible phosphate detection is vital for environmental monitoring and ensuring water quality. Current electrochemical methods often rely on nickel hydroxide, but these typically require alkaline conditions for sensitive detection. This is problematic because alkaline solutions are not environmentally friendly and can be challenging for field applications. The authors aim to address this by developing a nickel hydroxide-based sensor that functions effectively under neutral pH conditions, offering a more practical and sustainable solution.

Methods

The core of this research lies in the fabrication and characterization of a flake-shaped nickel hydroxide/carbon cloth (Ni(OH)₂/CC) composite electrode.

  • Fabrication: A simple, low-consumption, one-step water bath method was employed. Carbon cloth was used as a flexible and conductive substrate. Nickel nitrate hexahydrate and ammonia were used as precursors to grow Ni(OH)₂ flakes directly onto the carbon cloth. This method aimed to create a material with a high surface area and good adhesion.
  • Characterization: A suite of advanced techniques was used to analyze the material's structure, morphology, and composition:
  • Scanning Electron Microscopy (SEM): To visualize the surface morphology and confirm the presence of uniformly distributed, thin Ni(OH)₂ flakes on the carbon cloth.
  • Energy-Dispersive X-ray Spectroscopy (EDS): To confirm the elemental composition and distribution of Ni, O, and C on the electrode surface.
  • X-ray Diffraction Spectroscopy (XRD): To analyze the crystalline structure of the prepared material.
  • X-ray Photoelectron Spectroscopy (XPS): To determine the surface chemistry and valence states of the elements, confirming the presence of Ni(OH)₂ and its interaction with phosphate.
  • Electrochemical Testing:
    • Cyclic Voltammetry (CV): Used to study the electrochemical behavior, including redox properties, electrochemically active surface area (ECSA), and the effect of phosphate on the electrode's response. CV was also used to investigate the sensor's performance for phosphate detection across various concentrations and scan rates.
  • Electrochemical Impedance Spectroscopy (EIS): Employed to assess the charge transfer resistance and interfacial electrochemical properties of the electrode.
  • Amperometry: Utilized for sensitive detection of phosphate and to determine the limit of detection (LOD).

Datasets

Not explicitly discussed as "datasets" in the traditional machine learning sense. The electrochemical measurements were performed using standard electrolytes (e.g., 0.5 M NaCl) spiked with varying concentrations of phosphate. Real drinking water samples were also tested using the standard addition method.

Key Insights and Ideas

  • Neutral pH Detection: The most significant insight is the successful development of a nickel hydroxide-based sensor that operates effectively under neutral conditions, circumventing the need for alkaline environments. This is a major step towards practical, environmentally friendly phosphate sensing.
  • Flake Morphology is Key: The "flake-shaped" morphology of the Ni(OH)₂ is crucial. These thin flakes provide a larger specific surface area and more active sites, enhancing the electrode's ability to interact with and adsorb phosphate.
  • Phosphate-Induced Charge Redistribution: The mechanism of detection hinges on the specific adsorption of phosphate onto the Ni(OH)₂ surface. This adsorption alters the charge distribution, which in turn improves electron transfer efficiency and facilitates the valence change of nickel, leading to a measurable current response.
  • Synergistic Effect: The combination of the conductive carbon cloth substrate and the flake-shaped Ni(OH)₂ creates a synergistic effect, leading to enhanced electrochemical performance, including improved conductivity, faster electron transfer, and better adhesion.
  • Environmental Friendliness: By avoiding harsh alkaline conditions, the developed sensor is more environmentally friendly and suitable for field applications.

Key Results

  • High Sensitivity: The Ni(OH)₂/CC electrode achieved a remarkable sensitivity of 1530 mA mM⁻¹ cm⁻².
  • Wide Detection Range: The sensor demonstrated a broad linear detection range for phosphate from 1 to 200 µM.
  • Low Limit of Detection (LOD): The LOD was determined to be as low as 0.59 µM (at a signal-to-noise ratio of 3), which is well below the national threshold for eutrophication.
  • Fast Response Time: The current response to phosphate reached its maximum value within a short time of 1.8 seconds.
  • Good Stability and Reproducibility: The electrode exhibited excellent stability over 4 weeks and good reproducibility across multiple electrodes and repeated measurements, with relative standard deviations (RSDs) generally below 6.5%.
  • Anti-Interference: The sensor showed good resistance to common interferents found in water samples, with only minor effects observed from NH₄Cl.
  • Real Sample Analysis: The sensor successfully detected phosphate in real drinking water samples with good recovery rates (98.7% to 102.1%).

Limitations and Future Work

  • Interferent Specificity: While generally good, the paper notes that NH₄Cl caused a slight weakening of the current response. Further investigation into the specific interactions with other potential interferents might be beneficial.
  • Amperometric vs. Cyclic Voltammetry: The authors observed that while amperometry provided a very low LOD, the current response in the higher concentration range could decrease over time due to vigorous stirring. Cyclic voltammetry, on the other hand, offered a more stable and efficient method for detection across a wider range. Future work could focus on optimizing the amperometric method to mitigate this issue or further leverage the advantages of CV.
  • Mechanism Elucidation: While the general mechanism of phosphate adsorption and charge redistribution is proposed, a more detailed understanding of the specific nickel valence changes and their kinetics could be explored further.
  • Broader Application: The authors suggest that this work provides a pioneering thought for subsequent research, implying potential for adapting this sensor design for other analytes or for more complex sample matrices.

Summary updated

Abstract

Although the detection of phosphate can be achieved by nickel hydroxide instead of noble metals, the sensitive detection of phosphate using nickel hydroxide transformed into hydroxy nickel oxide needs to be done under alkaline conditions, which is not environmentally friendly. To solve this problem, we prepared flake-shaped nickel hydroxide-sensitive electrodes supported on carbon cloth using a low-consumption one-step method from the new strategy that the specific adsorption of nickel hydroxide to phosphate can change the electrode's surface charge distribution and investigated their performance in detecting phosphate under neutral conditions. The specific adsorption of phosphate changed the charge distribution on the surface of the electrode, improved the electron transfer efficiency, and facilitated the valorization of nickel, while the flake-shaped nickel hydroxide provided more active sites for the electrode, which resulted in a good performance of the nickel hydroxide electrode: a sensitivity of 1530 mA mM<sup>-1</sup> cm<sup>-2</sup>, a detection range of 1-200 μM, and the LOD of 0.59 μM (S/N = 3). This work provides an innovative idea for the determination of phosphate under neutral conditions, which has important practical applications.
BibTeX
@inproceedings{yu2025flake,
  author = {Jiang-Hao Yu and Yuhan Hao and Xu Zhao and Feiyang Chen and Chun Zhao and Hui Suo},
  title = {{Flake-Shaped Nickel Hydroxide Supported on Carbon Cloth as an Electrochemical Sensor for Efficient Detection of Phosphate Under Neutral Conditions}},
  booktitle = {Sensors},
  year = {2025},
  doi = {10.3390/s25030597},
}
Figure