First Animal Cadaver Study for Interlocking of Intramedullary Nails under Camera Augmented Mobile C-arm

Lejing Wang, Jürgen Landes, Simon Weidert, Tobias Blum, Anna von der Heide, Ekkehard Euler, Nassir NavabIPCAI 2010 · DOI

TL;DR

This paper introduces a workflow-based evaluation method to assess the clinical impact of a Camera Augmented Mobile C-arm (CamC) system for interlocking intramedullary nails. The study demonstrates that CamC significantly reduces radiation exposure during this procedure with comparable operation times and drilling quality, highlighting its potential to improve surgical workflows.

What Problem Does This Paper Address?

Image-guided surgery (IGS) systems promise to enhance surgical procedures, but few achieve widespread clinical adoption. A major hurdle is the complex and lengthy process of evaluating their real-world clinical performance. While technical aspects of IGS systems like the Camera Augmented Mobile C-arm (CamC) have been studied, its actual clinical impact on surgical workflows remains largely uninvestigated. This paper addresses this gap by proposing and applying a structured, workflow-based evaluation method to assess the CamC system's effectiveness in a simulated clinical scenario: interlocking intramedullary nails. This procedure, common in trauma and orthopedic surgery, relies heavily on intra-operative X-ray imaging, making it a prime candidate for technologies that can reduce radiation exposure and potentially improve efficiency.

Methods

The authors employ a workflow-based evaluation method to assess the CamC system. This approach breaks down a surgical procedure into individual steps and evaluates the system's performance at each stage, rather than just for the entire procedure. This allows for a more granular understanding of where a new system offers advantages or disadvantages.

The core of their evaluation involves a pre-clinical study using cow cadaver forelegs to simulate the interlocking of intramedullary nails. They compare two configurations:

  1. CamC system: A standard mobile C-arm augmented with a video camera and a mirror construction, providing an overlay of the live video feed with the X-ray image.
  2. Standard mobile C-arm: The conventional system without the camera augmentation.

The study meticulously defines a seven-step surgical workflow for interlocking. For each step, they collect data on the number of X-ray shots (a proxy for radiation exposure), operation time, and drilling quality. Statistical analysis, including paired t-tests, is used to compare the performance between the CamC and standard C-arm groups.

Datasets

The study uses cow cadaver forelegs as the experimental "dataset." These were chosen for their anatomical similarity to human limbs and their availability for pre-clinical research. The authors note that the cow legs were stabilized on a wooden board to mimic the clinical situation as closely as possible. No other specific datasets were used or introduced.

Key Insights and Ideas

  • Workflow-based evaluation is crucial for IGS adoption: By dissecting procedures into steps, researchers and clinicians can pinpoint specific benefits and drawbacks of new technologies, leading to more targeted improvements and better predictions of clinical impact.
  • CamC offers significant radiation reduction: The overlay of live video with X-ray images in the CamC system allows surgeons to perform tasks with fewer X-ray exposures, a critical factor in minimizing patient and staff radiation doses.
  • Intuitive guidance enhances confidence: Surgeons reported feeling more confident performing tasks with the augmented visual guidance provided by the CamC system, which directly translated to reduced X-ray usage.
  • CamC's impact is step-specific: While the overall procedure benefits from CamC, its most significant advantages are observed in steps like X-ray positioning, skin incision, center punch, and drilling, where visual guidance is particularly helpful.

Key Results

  • Reduced Radiation Exposure: The CamC group required significantly fewer X-ray shots for the entire interlocking procedure (9.85 ± 3.10 vs. 17.05 ± 4.61, p < 0.0001). This reduction was also significant in several individual steps, including X-ray positioning (p = 0.028), skin incision (p < 0.0001), center punch (p = 0.0066), and drilling (p = 0.028).
  • Operation Time: While the CamC group showed a trend towards longer operation times for the whole procedure (367.30 ± 173.70 seconds vs. 348.45 ± 114.07 seconds), this difference was not statistically significant (p = 0.55). However, the skin incision step was significantly faster with CamC (p = 0.026).
  • Drilling Quality: The drilling quality was comparable between the two groups, with the CamC group even showing slightly better results (1.80 ± 0.70 vs. 2.20 ± 0.77, p = 0.12).
  • Variability: The CamC group exhibited smaller standard deviations (STD) for the number of X-ray shots across most steps and the overall procedure, suggesting increased reliability and stability.

Limitations and Future Work

  • Simulated Environment: The study was conducted on animal cadavers, which, while a good simulation, does not fully replicate the complexities of live surgery, including patient movement and physiological responses.
  • Learning Curve: The authors acknowledge that the variation in operation time for the CamC group was higher, potentially due to a learning curve associated with the new system.
  • Step-Specific Analysis: While the workflow-based evaluation revealed specific steps where CamC excels, the authors suggest that further investigation into these steps could yield even more insights.
  • Future Work: The authors plan to extend their proposed workflow-based method to evaluate the CamC system on real patients in the near future. They also aim to use this method to predict the clinical impact of the CamC system beyond the specific application of interlocking, given that many of the evaluated workflow steps are common to other surgical procedures.

Summary updated

BibTeX
@inproceedings{wang2010first,
  author = {Lejing Wang and Jürgen Landes and Simon Weidert and Tobias Blum and Anna von der Heide and Ekkehard Euler and Nassir Navab},
  title = {{First Animal Cadaver Study for Interlocking of Intramedullary Nails under Camera Augmented Mobile C-arm}},
  booktitle = {IPCAI},
  year = {2010},
  doi = {10.1007/978-3-642-13711-2\_6},
}
Figure