Abstract
To analyze and summarize the actual characteristics of retaining walls under different circumstances—including natural soil, soil with varying degrees of compaction, and soil reinforced with anchors—a finite element model was established based on an expressway widening project featuring a gravity retaining wall up to 18m. Results indicate that displacement toward the outside of the retaining wall occurs alongside tensile stress on the inner side, which is positively correlated with the degree of backfill compaction. Furthermore, the study demonstrates that adding anchor rods is highly effective in ensuring the stability of high-slope retaining walls.
Introduction
In mountainous regions, highway expansion often necessitates the construction of massive retaining walls on steep slopes. These structures are vulnerable to failure, such as cracking or collapse, particularly following heavy rainfall. While engineers recognize that soil compaction and anchoring are critical factors, the precise relationship between compaction levels, anchor placement, and wall stress is often unclear for ultra-high structures. This study utilizes 3D finite element analysis (FEA) to evaluate the stability of an 18-meter gravity retaining wall, providing a numerical baseline for how these variables affect structural integrity.
Methodology
The researchers developed a 3D finite element model based on a real-world expressway widening project. The model consists of 23,172 elements, including the retaining wall, the original slope, and the artificial backfill.
Key technical details include:
- Modeling Software: The use of C3D8R elements for solids and T3D2 for bars indicates the application of ABAQUS.
- Material Behavior: Backfill soil was modeled as elastic-plastic (Mohr-Coulomb failure criterion), while the concrete wall and anchors were treated as perfectly elastic and isotropic.
- Variables: The simulation tested four levels of soil compaction (90% to 99%) and various anchoring configurations, varying the angle from 15° to 90° and the vertical position from 5.8m to 10.8m.
Key Results and Discussion
The Compaction Paradox
A primary finding of the study is the "Compaction Paradox." While higher compaction is generally associated with better soil performance, the simulation revealed that as compaction increased from 90% to 99%, the maximum displacement of the wall actually increased by 10.7%. This occurs because denser soil exerts higher lateral pressures and increases tensile stress on the inner face of the wall. Specifically, moving from 90% to 99% compaction increased maximum tensile stress by 17.7% and compressive stress by 7.9%.
Optimization of Reinforcement
To mitigate these stresses, the study evaluated the impact of anchor rods. The simulation identified a "sweet spot" for reinforcement:
- Optimal Angle: A 45-degree anchoring angle was found to be the most effective at minimizing both tensile and compressive stresses.
- Optimal Height: Anchors are most effective when placed high in the wall's tensile zone. For this 18m structure, placement at 10.8m from the base yielded the best results.
- Performance Gains: Implementing the optimal anchoring scheme (45° at 10.8m) reduced maximum tensile stress by 27.16% and compressive stress by 7.00%.
Conclusion
This finite element analysis provides critical insights into the design of high-slope retaining walls. While high compaction levels can inadvertently increase lateral pressure and wall displacement, strategic anchoring can significantly enhance the safety margin. Future research should incorporate hydrological factors, such as pore water pressure from rainfall, and dynamic loading from traffic or seismic activity to provide an even more robust safety analysis for mountainous infrastructure.
Summary updated