Finite Element Analysis and optimization design of sprinkler Truss Structure

Changhu Wang, Weiyun Meng, Jianxiang Wang, Xiangmei MinJournal of Physics Conference Series 2022 · DOI

Abstract

Truss structures are widely applied in bridges and buildings due to their light weight, reasonable load-bearing, and high material utilization rate. For truss structures serving as load-bearing carriers, structural strength must be guaranteed while considering economic performance. This paper introduces finite element theory and performs computer-aided simulation analysis by combining numerical analysis and finite element theory. The truss structure of a sprinkler was subjected to mechanical analysis, exploring stability with maximum displacement and stress as constraints. Finally, the structure was optimally designed until its stability, strength, and stiffness met all relevant requirements.

Introduction

Multi-nozzle truss-type sprinklers represent a significant advancement in agricultural irrigation, offering higher efficiency and more uniform water distribution compared to single-nozzle systems. However, designing these structures involves a complex engineering trade-off. With spans reaching up to 33 meters, the truss must be robust enough to support its own weight, the water load, and a central fertilizer bucket, yet light enough to avoid sinking into soft soil or tipping over on uneven terrain. This study addresses the optimization of such a truss to minimize mass while strictly adhering to mechanical safety standards.

Methodology

The research utilized the Finite Element Method (FEM) via ANSYS software to simulate and optimize the physical structure. A 3D geometric model of the Q235 steel truss was developed, employing both "Shell" and "Solid" elements to accurately represent the tension and compression components of the water pipes and profile steels.

3D Finite Element Model and simulation vectors showing the structural components and flow analysis.

Loads applied in the simulation included the uniformly distributed dead weight of the truss, the weight of the water within the pipes, and a concentrated load at the center support node representing the fertilizer bucket. Wind loads were excluded based on the low-wind historical data of the target deployment region in Yuncheng County.

Structural Analysis and Insights

The core of the analysis focused on identifying stress bottlenecks. Simulations clearly demonstrated that the central section of the truss—the mounting point for the fertilizer bucket—experiences the highest levels of stress and displacement. This central node is the primary point of potential fatigue failure.

Contour map illustrating the distribution of stress and displacement across the truss section.

A key insight from the study is that the volume of the fertilizer bucket is the most critical variable affecting structural integrity. Rather than simply increasing the thickness of the steel beams, which would add prohibitive weight, the authors found that optimizing the bucket size and pipe dimensions provided a more effective path to safety. Smart material distribution proved superior to bulk reinforcement.

Key Results

  • Stress Thresholds: Initial simulations with 90 L and 140 L fertilizer buckets resulted in maximum stresses of 190 MPa and 346 MPa, respectively—both exceeding the 180 MPa permissible limit for Q235 steel.
  • Optimization: Reducing the bucket volume to 55 L successfully brought the maximum stress within safe, permissible levels.
  • Material Specifications: The analysis determined that stainless steel pipes with a radius greater than 11 mm and a thickness greater than 1 mm offer the optimal balance of weight and load-bearing capacity.
  • Validation: The optimized 55 L design was manufactured and successfully tested in real-world agricultural operations in Shandong Province, showing enhanced reliability.

Conclusion and Future Work

While the optimized design proved successful for the specific conditions of Yuncheng County, the authors acknowledge limitations regarding wind power. Future iterations of the design will need to account for aerodynamic loads in high-wind regions. This work provides a foundation for deploying cost-effective, high-performance irrigation systems to support agricultural development and poverty alleviation projects across diverse geographic regions.

Summary updated

Abstract

Abstract This paper includes three sections. Truss structures have been widely applied in bridges and buildings due to their light weight, reasonable load-bearing, and high material utilization rate. For truss structures serving as load-bearing carriers, their structural strength should be guaranteed, and moreover, their economic performance should be considered. First, the finite element theory was introduced, and the computer-aided simulation analysis was performed by combining numerical analysis and finite element theory. Second, the truss structure of a sprinkler was subjected to a mechanical analysis, and its stability was explored with its maximum displacement and maximum stress as constraints. Finally, the truss structure was optimally designed until its stability, strength, and stiffness met relevant requirements.
BibTeX
@article{wang2022finite,
  author = {Changhu Wang and Weiyun Meng and Jianxiang Wang and Xiangmei Min},
  title = {{Finite Element Analysis and optimization design of sprinkler Truss Structure}},
  journal = {Journal of Physics Conference Series},
  year = {2022},
  doi = {10.1088/1742-6596/2365/1/012031},
}
Figure