Fine-Scale and Population-Weighted PM2.5 Modeling in Melbourne: Towards Detailed Urban Exposure Mapping

Jun Gao, Xuying Ma, Qian Chayn Sun, Wenhui Cai, Xiaoqi Wang, Yifan Wang, Zelei Tan, Danyang Li, Yuanyuan Fan, Leshu Zhang, Yi Xu, Xueyao Liu, Yue MaISPRS 2026 · DOI

TL;DR

This study tackles the challenge of unquantified fine-scale PM2.5 exposure disparities in Australian cities by developing a novel hybrid modeling framework. By integrating low-cost sensor data with advanced spatial statistics, they created high-resolution PM2.5 maps and identified key environmental and socioeconomic drivers of exposure, revealing complex inequalities that demand targeted urban planning.

What Problem Does This Paper Address?

Air pollution, particularly fine particulate matter (PM2.5), poses a significant threat to public health, but its distribution in urban environments is highly heterogeneous. Traditional monitoring networks are often sparse, leading to coarse-grained pollution maps that fail to capture neighborhood-level variations. This gap hinders our ability to understand and address environmental inequalities, especially in rapidly urbanizing cities like Melbourne. Existing models struggle to simultaneously account for the complex interplay of physical, built-environment, and socioeconomic factors that drive these disparities at a fine scale.

Methods

The authors employed a multi-stage approach:

  1. High-Resolution PM2.5 Mapping: They developed a Land Use Regression (LUR) model by integrating data from regulatory monitoring stations and 13 low-cost sensors (LCSs). This allowed for the estimation of PM2.5 concentrations at a 100m resolution across Melbourne.
  2. Population-Weighted Exposure (PWE) Calculation: Using the high-resolution PM2.5 maps and detailed population data (mesh block level), they calculated PWE to represent actual resident exposure.
  3. Hybrid Spatial-RF-GWR Framework: To understand the factors driving spatial heterogeneity in PWE, they used a two-stage modeling process:
  4. Spatially Explicit Random Forest (Spatial-RF): This machine learning technique was used to identify the most important explanatory variables from a large set of potential predictors, accounting for spatial context.
  5. Geographically Weighted Regression (GWR): This local regression technique was then applied to model the spatially varying relationships between the selected key variables and PWE, capturing spatial non-stationarity.

Datasets

  • PM2.5 Observations: Six months of continuous PM2.5 data (October 2023 to March 2024) from 5 regulatory EPA stations and 13 PurpleAir LCSs.
  • Geospatial Predictor Variables: A comprehensive set of variables from the Synthesized Multi-Dimensional Environmental Exposure Database (SEED), including:
  • Land Use (OSM, reclassified)
    • Road Network (OSM, Department of Transport and Planning)
    • Traffic Flow (Department of Transport and Planning)
    • Bus Stops (OSM)
    • Population and Household Data (Australian Bureau of Statistics - ABS, 2021 Census mesh blocks)
    • Building Footprints and Heights (Global Building Atlas)
    • Meteorological Data (ERA5 reanalysis)
    • Normalized Difference Vegetation Index (NDVI)
    • Index of Education and Occupation (IEO)
    • Proportion of Culturally and Linguistically Diverse Populations (CALDP)
    • Index of Economic Resources (IER)

Key Insights and Ideas

  • LCS Data is Crucial for Fine-Scale Mapping: The integration of LCS data significantly enhanced the spatial resolution of PM2.5 mapping, revealing patterns missed by traditional sparse monitoring.
  • PWE Exceeds WHO Guidelines: Even in a relatively well-performing city like Melbourne, population-weighted PM2.5 exposure levels generally exceeded the 2021 WHO guideline, highlighting a widespread public health concern.
  • Complex Socioeconomic Inequalities: Environmental inequality isn't solely about socioeconomic disadvantage. Higher socioeconomic status residents in urban cores also face elevated exposure, likely due to preferences for living in high-activity areas.
  • Spatial Non-Stationarity is Key: The relationships between environmental factors and PWE are not uniform across the city. GWR effectively captured these local variations, which global models miss.
  • NDVI as a Protective Factor: Green space (NDVI) consistently showed an inhibitory effect on PM2.5 exposure, particularly in urban core areas.
  • CALDP and IEO Show Context-Dependent Associations: The impact of cultural diversity (CALDP) and socioeconomic status (IEO) on exposure varies significantly depending on the urban fabric and location.

Key Results

  • LUR Model Performance: The final LUR model achieved an R² of 0.62, with MAE of 0.63 µg/m³ and RMSE of 0.84 µg/m³.
  • PWE Range: PWE generally ranged from 5 to 7 µg/m³, with hotspots in the urban core and along major transport corridors.
  • Hybrid Model Performance: The GWR model achieved a higher R² (0.65) compared to Spatial-RF (0.56) and global OLS (0.38), demonstrating its effectiveness in capturing spatial heterogeneity.
  • Key Predictors for GWR: NDVI, CALDP, and IEO were identified as the most significant explanatory variables for PWE.

Limitations and Future Work

  • Seasonal Variability: The study period was limited to the warm season (October-March), and thus does not capture potential wintertime pollution patterns (e.g., wood heating, temperature inversions).
  • Monitoring Station Bias: The spatial distribution of monitoring stations, often clustered in urban functional zones, might introduce sampling bias.
  • Static Exposure Assessment: The study assessed exposure based on static residential locations, neglecting the impact of human mobility and daily activity patterns, which could lead to misestimation of personal exposure.
  • Future Work:
    • Incorporate dynamic population mobility data for more accurate exposure characterization.
  • Integrate more comprehensive environmental justice indices and statistical tests for rigorous assessment of exposure disparities.
  • Adapt the Spatial-RF-GWR framework to other metropolitan areas with sparse monitoring networks.
  • Explore additional explanatory variables to further enhance model performance and explanatory capacity.

Summary updated

Abstract

Despite concern over air pollution, fine-scale spatial and demographic disparities in exposure remain largely unquantified in Australian cities due to sparse monitoring and coarse models. In Greater Melbourne, this gap limits neighbourhood-level assessment of PM2.5 exposure and associated environmental inequalities. To address this gap, we integrated 6-month averaged PM2.5 observations (October 2023 to March 2024) from 5 regulatory monitoring stations and 13 low-cost sensors (LCSs) to develop a land use regression (LUR) model estimating concentrations at a 100 m resolution. These estimates were used to calculate population-weighted PM2.5 exposure (PWE) at the mesh block level across Melbourne. To examine factors associated with spatial heterogeneity in PWE, we applied a hybrid modeling framework combining Spatially Explicit Random Forest (Spatial-RF) and Geographically Weighted Regression (GWR), incorporating physical, built-environment, and socio-demographic variables from the Synthesized Multi-Dimensional Environmental Exposure Database (SEED). The Spatial-RF model initially exhibited an R2 of 0.56. After multicollinearity diagnostics using the Variance Inflation Factor (VIF), three key explanatory variables were selected for GWR modeling: the Normalized Difference Vegetation Index (NDVI), the Index of Education and Occupation (IEO), and the proportion of culturally and linguistically diverse populations (CALDP). The developed GWR model achieved higher model performance (R2 = 0.65) than Spatial-RF and global Ordinary Least Squares (OLS) regression (R2 = 0.38), revealing strong spatial non-stationarity. Results show that PWE generally ranged from 5 to 7 µg/m3, exceeding the 2021 WHO air quality guideline, with hotspots in the urban core and along major transport corridors. Elevated exposure occurred in both socioeconomically disadvantaged areas and residents in urban centers with higher socio-economic status, reflecting complex, spatially contingent exposure inequalities. These findings support fine-scale, equity-oriented air quality management.
BibTeX
@inproceedings{gao2026fine,
  author = {Jun Gao and Xuying Ma and Qian Chayn Sun and Wenhui Cai and Xiaoqi Wang and Yifan Wang and Zelei Tan and Danyang Li and Yuanyuan Fan and Leshu Zhang and Yi Xu and Xueyao Liu and Yue Ma},
  title = {{Fine-Scale and Population-Weighted PM2.5 Modeling in Melbourne: Towards Detailed Urban Exposure Mapping}},
  booktitle = {ISPRS},
  year = {2026},
  doi = {10.3390/ijgi15030134},
}
Figure