FIND: Frequency Invariance Disentanglement for Test-Time Adaptation in LiDAR 3D Detection

Dongxiao Li, Zixuan Hu, Ling-Yu DuanarXiv 2026 · arXiv

TL;DR

FIND (Frequency INvariance Disentanglement) is a new framework for adapting LiDAR 3D object detectors to new environments during inference. By shifting from the spatial domain to the frequency domain using Graph Fourier Transforms and learnable B-Spline filters, it precisely separates essential object shapes from domain-specific noise and sensor patterns, significantly outperforming previous state-of-the-art methods.

What Problem Does This Paper Address?

LiDAR-based 3D Object Detection (L3OD) is the backbone of autonomous driving, but it has a major "brittleness" problem. A model trained on high-resolution data from one sensor in sunny California often fails when deployed on a lower-resolution sensor in rainy Germany. These "domain shifts"—caused by different sensor configurations, weather, or locations—degrade performance significantly.

Existing Test-Time Adaptation (TTA) methods try to fix this on the fly without needing the original training data. However, most current methods operate in the spatial domain (3D coordinates). The authors argue that in the spatial domain, the "semantic content" (what a car looks like) and the "domain style" (how a specific sensor samples that car) are hopelessly entangled. It’s hard to tell if a gap in a point cloud is part of the object's geometry or just a sensor artifact.

Figure 1: (a) Illustration of domain shift types in L3OD. (b) Spatial constraints of point clouds, i.e., complex entanglement. (c) Disentanglement paradigm through Fourier transformation.

Methods

The core innovation of FIND is moving the adaptation process into the frequency domain.

  1. Graph Fourier Transform (GFT): The authors treat point clouds as graphs and use GFT to map them into a spectral representation. This allows them to analyze geometric topology as a compact spectrum.
  2. B-Spline Frequency Filters: Contrary to the common belief that noise is just "high frequency," the authors found that domain-specific interference is spread across the spectrum and fluctuates sharply between adjacent bands. To handle this, they use B-Spline fitting to create locally adaptive filters. Unlike rigid global filters, B-Splines allow for fine-grained, "band-selective" control to surgicaly remove interference without distorting the overall geometry.
  3. Dual-Stream Architecture:
    • Invariant Stream: Uses a filter to extract robust, stable features to generate reliable "pseudo-labels."
    • Specific Stream: Enforces consistency by training the model to be robust against domain-specific perturbations.
  4. Stability-Guided Regularization: Since they don't have labels in the target domain, they use the Coefficient of Variation (CV) of spectral energy as a data-driven proxy to identify which frequency bands are stable (invariant) and which are volatile (domain-specific).
Figure 3: Overview of our FIND method. (a) GFT foundation for spectral analysis of point cloud. (b) Dual-stream architecture with distinct filter modules to disentangle domain-invariant semantic content (Sec. 5.1). (c) FIND employs B-Spline frequency filters to capture narrow-band invariant and specific components. (d) Through the disentangled learning strategy (Sec. 5.2), L3OD model and filtering modules can be optimized jointly to foster a virtuous cycle.

Datasets

The authors evaluated FIND on several rigorous benchmarks:

  • Cross-Dataset Adaptation: Moving from nuScenes or Waymo to KITTI. These involve shifts in both geographic location and LiDAR beam configurations.
  • Robustness Benchmarks: KITTI-C, which simulates 8 types of real-world corruptions like fog, rain, and sensor crosstalk.
  • Cross-Corruption: A particularly challenging scenario moving from Waymo to KITTI-C.

Key Insights and Ideas

  • The Spectral "Aha" Moment: The paper reveals that domain discrepancies aren't just high-frequency noise; they are pervasive across the spectrum. Rigidly cutting off high frequencies (low-pass filtering) actually destroys fine details like wheels, while cutting low frequencies destroys the global shape of the vehicle.
  • Local Control is Key: Because domain interference fluctuates sharply between neighboring frequency bands, global filters are too blunt. The local support property of B-Splines is what makes the disentanglement precise.
  • CV as a Proxy for Domain Gap: The authors discovered a strong correlation between the intra-domain stability (measured by CV) and the cross-domain gap (measured by KL divergence). This allows them to guide the filters without ever seeing the source data during adaptation.
Spectral entanglement analysis showing how rigid filtering degrades geometry and how KL divergence fluctuates across the spectrum.

Key Results

FIND achieved state-of-the-art (SOTA) results across the board:

  • Cross-Dataset: On the Waymo $\rightarrow$ KITTI task, FIND achieved 82.35 AP_BEV, significantly closing the gap toward "Oracle" performance (fully supervised training on the target domain).
  • Corruptions: On KITTI-C (heavy severity), FIND improved average performance by +2.14 AP_3D over existing SOTA methods like MOS and DUO.
  • Efficiency: Despite the complexity of graph operations, FIND is computationally efficient, requiring roughly 194ms per point cloud—orders of magnitude faster than some previous ensemble-based methods like MOS (~3088ms).

Limitations and Future Work

  • Computational Overhead: While faster than some, the Laplacian eigendecomposition required for GFT still adds overhead. The authors suggest exploring lightweight spectral approximations in the future.
  • Hyperparameter Sensitivity: The effectiveness of B-Splines depends on the number of bins ($N$) and the spline order ($K$). While the current settings are robust, highly varying point cloud densities might eventually require manual tuning or a meta-adaptive mechanism.
  • Initialization: The method currently relies on a good initialization of knot vectors and control points. The authors aim to explore ways to automatically configure these for diverse sensor resolutions.

Summary updated

Abstract

LiDAR-based 3D Object Detection (L3OD) is a fundamental 3D perception task, yet its performance is often compromised by domain shifts arising from diverse sensor configurations and environmental conditions. Existing Test-Time Adaptation (TTA) methods primarily leverage self-supervision in the spatial domain, yet they frequently confound semantic content with domain style due to the sparse, non-Euclidean nature of point clouds. To overcome this limitation, we propose FIND (Frequency INvariance Disentanglement), a novel TTA framework that precisely disentangles domain-invariant content from domain-specific interference within the frequency domain. Our methodology utilizes B-Spline fitting to construct locally adaptive filters integrated into a dual-stream architecture: an Invariant Stream extracts robust features to guide pseudo-labeling, while a Specific Stream enforces consistency against domain perturbations. By combining invariance-driven alignment with stability-guided regularization, our approach dynamically extracts robust domain-invariant features while suppressing domain-specific interference. Extensive experiments on cross-dataset adaptation and robust corruption benchmarks demonstrate that FIND significantly outperforms state-of-the-art methods. The source code is publicly available at https://github.com/llldx03/FIND.
BibTeX
@misc{li2026find,
  author = {Dongxiao Li and Zixuan Hu and Ling-Yu Duan},
  title = {{FIND: Frequency Invariance Disentanglement for Test-Time Adaptation in LiDAR 3D Detection}},
  year = {2026},
  eprint = {2611.09170},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2611.09170},
}
Figure