Ferulic Acid production by metabolically engineered Escherichia coli

Huajun Lv, Ying Zhang, Jie Shao, Haili Liu, Yong WangResearch Square 2021 · DOI

This research paper, published in Bioresources and Bioprocessing, details the metabolic engineering of Escherichia coli to create a high-efficiency microbial factory for Ferulic Acid (FA). By combining genes from three different species and optimizing both gene expression levels and cofactor availability, the authors achieved a record-breaking yield for E. coli K-12 strains.

TL;DR

Researchers successfully engineered E. coli to produce 212 mg/L of Ferulic Acid by assembling a heterologous pathway and systematically optimizing it. The key to their success was balancing enzyme expression levels and engineering the host's metabolism to provide more of the essential cofactors NADPH and SAM.

What Problem Does This Paper Address?

Ferulic Acid (FA) is a high-value natural antioxidant used extensively in the food, cosmetic, and pharmaceutical industries. Currently, FA is primarily obtained through chemical synthesis or extraction from plant materials like wheat bran. However, chemical synthesis produces a mixture of isomers that are hard to separate, and plant extraction is often inefficient and environmentally taxing.

While microbial "cell factories" offer a greener alternative, previous attempts to produce FA in E. coli suffered from low titers. The metabolic pathway is complex, requiring specific enzymes to work in harmony and demanding a steady supply of cellular "energy" in the form of cofactors like NADPH and S-adenosyl-L-methionine (SAM).

Methods

The authors constructed a three-step biosynthetic pathway to convert L-tyrosine into FA:

  1. TAL (Tyrosine ammonia-lyase): From Rhodobacter sphaeroides, to convert L-tyrosine to $p$-coumaric acid.
  2. SAM5 ($p$-coumarate 3-hydroxylase): From Saccharothrix espanaensis, to convert $p$-coumaric acid to caffeic acid.
  3. COMT (Caffeic acid O-methyltransferase): From Triticum aestivum (wheat), to convert caffeic acid to FA.

The team employed several optimization strategies:

  • Host Selection: They compared two common E. coli strains, JM109(DE3) and BL21(DE3).
  • Expression Tuning: They tested different combinations of plasmid copy numbers (pBR322 vs. p15a origins) and promoter strengths (T7 vs. T5) to find the optimal balance that minimized metabolic burden.
  • Cofactor Engineering: They overexpressed the native pntAB gene to boost NADPH regeneration and the non-native metK gene (from Streptomyces spectabilis) to increase the supply of SAM.

Datasets

As a metabolic engineering study, the paper does not use traditional machine learning datasets. Instead, it relies on:

  • Genomic Sequences: Gene sequences for TAL, SAM5, and COMT sourced from GenBank (accession numbers provided in the paper).
  • Experimental Data: Quantitative data generated via HPLC (High-Performance Liquid Chromatography) to measure metabolite concentrations and SDS-PAGE to verify protein expression.

Key Insights and Ideas

  • The "Goldilocks" Principle of Expression: Surprisingly, the strongest expression system (high-copy plasmid with a T7 promoter) was not the best. The authors found that a medium-copy plasmid (p15a) with a T5 promoter yielded the highest FA production. This suggests that over-expressing these specific enzymes can lead to protein aggregation (inclusion bodies) or excessive metabolic stress.
  • Host Specificity: JM109(DE3) significantly outperformed the industry-standard BL21(DE3). The authors attribute this to JM109's lower acetate production, which maintains a healthier environment for cell growth and product accumulation.
  • Cofactor Bottlenecks: The conversion of $p$-coumaric acid to caffeic acid is limited by NADPH availability, while the final step to FA is limited by SAM. Addressing these two bottlenecks simultaneously provided a synergistic boost to the final titer.

Key Results

  • Optimized Titer: The final engineered strain produced 212 mg/L of Ferulic Acid in flask fermentation.
  • Efficiency: The process left only 11.8 mg/L of caffeic acid residue, indicating a highly efficient conversion rate.
  • Benchmark: This result represents the highest yield of FA reported for E. coli K-12 strains to date.
  • Temperature Sensitivity: Lowering the fermentation temperature from 37°C to 28°C improved protein solubility and overall yield.

Limitations and Future Work

  • Precursor Costs: The current study uses L-tyrosine as a starting substrate. For industrial viability, future work should focus on de novo synthesis—engineering the bacteria to produce FA directly from cheaper carbon sources like glucose.
  • Scale-up: These results were achieved in shake flasks. Moving to large-scale bioreactors will require further optimization of fermentation parameters (pH, oxygen levels, and feeding strategies).
  • Residual Metabolites: While low, there is still some residual caffeic acid. Further engineering of the SAM cycle or the COMT enzyme itself could push the conversion closer to 100%.

Summary updated

Abstract

<title>Abstract</title> Ferulic acid (<italic>p</italic>-hydroxy-3-methoxycinnamic acid, FA) is a natural active substance present in plant cell walls, with antioxidant, anticancer, antithrombotic and other properties; it is widely used in medicine, food, and cosmetics areas. Production of FA by eco-friendly bioprocess is of great potential. In this study, FA was biosynthesized by metabolically engineered <italic>Escherichia coli</italic>. As the first step, the genes <italic>tal</italic> (encoding Tyrosine ammonia-lyase, <italic>Rs</italic>TAL) from <italic>Rhodobacter sphaeroides</italic>, <italic>sam5</italic> (encoding <italic>p</italic> - coumarate 3-hydroxylase, <italic>Se</italic>SAM5) from <italic>Saccharothrix espanaensis</italic> and <italic>comt</italic> (encoding Caffeic acid O-methytransferase, <italic>Ta</italic>CM) from <italic>Triticum aestivum</italic> were cloned in an operon on the pET plasmid backbone, <italic>E. coli</italic> strain containing this construction was proved to produce FA from L-tyrosine successfully, and confirmed the function of <italic>Ta</italic>CM as Caffeic acid O-methytransferase. Fermentation results revealed JM109(DE3) as more suitable host cell for FA production than BL21(DE3). After that the genes expression strength of FA pathway were optimized by tuning of promoter strength (T7 promoter or T5 promoter) and copy number (pBR322 ori or p15a ori), and the combination p15a-T5 works best. To further improve FA production, <italic>E.coli</italic> native <italic>pntAB</italic>, encoding pyridine nucleotide transhydrogenase, was selected from five NADPH regeneration genes to supplement redox cofactor NADPH for converting <italic>p</italic>-coumaric acid into caffeic acid in FA biosynthesis process. Sequentially, to further convert caffeic acid into FA, a non-native methionine kinase (MetK from <italic>Streptomyces spectabilis</italic>) was also over expressed. Based on the flask fermentation data which shows that the engineered <italic>E. coli</italic> strain produced 212 mg/L of FA with 11.8 mg/L caffeic acid residue, it could be concluded that it is the highest yield of FA achieved by <italic>E.coli</italic> K-12 strains reported to the best of our knowledge.
BibTeX
@inproceedings{lv2021ferulic,
  author = {Huajun Lv and Ying Zhang and Jie Shao and Haili Liu and Yong Wang},
  title = {{Ferulic Acid production by metabolically engineered Escherichia coli}},
  booktitle = {Research Square},
  year = {2021},
  doi = {10.21203/rs.3.rs-326241/v1},
}

Loading related content...

Figure