Fast frequency response with heterogeneous communication delay management under the SCION Internet architecture

Jialun Zhang, Felix Kottmann, Jimmy Chih-Hsien Peng, Adrian Perrig, Gabriela HugarXiv 2026 · arXiv · OpenReview

TL;DR

This paper introduces a novel framework for managing fast frequency response (FFR) in power grids by leveraging the SCION internet architecture. It proposes a cyber-physical co-optimization approach that accounts for heterogeneous communication delays, enabling more reliable and efficient integration of distributed energy resources (DERs) and controllable loads (CLs) for grid stability.

What Problem Does This Paper Address?

The increasing integration of renewable energy sources into power grids, which inherently lack the inertia of traditional synchronous generators, leads to more frequent and severe frequency deviations during contingency events. Fast Frequency Response (FFR) services are crucial to counteract these deviations and prevent blackouts. Traditionally, FFR relies on communication networks like the Border Gateway Protocol (BGP)-based internet. However, BGP struggles with providing guaranteed low-latency communication, which is critical for time-sensitive FFR. Proprietary networks are costly and lack scalability. This paper addresses the challenge of managing FFR effectively in the presence of variable communication delays from diverse flexible resources (DERs and CLs) by proposing a solution that utilizes the SCION internet architecture's ability to select low-latency communication paths.

Methods

The paper proposes a multi-faceted approach:

  • Analytical Frequency Dynamics Modeling: They derive an analytical expression for system frequency dynamics that explicitly accounts for heterogeneous communication latencies from DERs and CLs. This involves transforming complex frequency domain representations into simpler real-valued components for optimization.
  • Cyber-Physical Co-Optimization Model: A model is formulated to jointly optimize communication path selection (using SCION's capabilities) and the dispatch of physical flexibility resources (DERs and CLs) to provide FFR. This model aims to minimize operational costs and communication latency.
  • Heuristic Reserve Allocation Algorithm: To tackle the computational complexity of the non-linear optimization problem, a heuristic algorithm is developed. This algorithm iteratively allocates reserves based on the order of communication latencies, prioritizing lower-latency resources. It also incorporates computation acceleration techniques like nadir range prediction and warm-start initialization.
  • SCION for Low-Latency Routing: The SCION internet architecture is leveraged for its ability to select optimal communication paths based on latency, jitter, and dropout rates, ensuring reliable and low-latency delivery of FFR commands.

Datasets

The paper uses real-world communication latency data derived from deployments of SCION networks across seven countries (US, Brazil, Germany, Netherlands, Switzerland, Singapore, and South Korea). This data was collected over a week using an active probing scheme with a sampling granularity of 0.5 seconds. The data was then aggregated and used to simulate communication latencies for DERs and CLs.

Key Insights and Ideas

  • SCION's Advantage for FFR: The SCION internet architecture offers a significant advantage over traditional BGP for FFR services due to its inherent ability to prioritize and select low-latency communication paths, which is crucial for time-critical grid stability operations.
  • Heterogeneous Latency is a Major Hurdle: The variability in communication delays from different DERs and CLs is a primary challenge in effectively dispatching FFR. The proposed analytical model and heuristic algorithm directly address this by incorporating and managing these diverse latencies.
  • Cyber-Physical Co-Optimization is Key: Effective FFR management requires a holistic approach that considers both the physical characteristics of the grid and the cyber aspects of communication. Jointly optimizing communication paths and reserve dispatch is essential for optimal performance.
  • Heuristic Approach for Scalability: The NP-hard nature of the FFR dispatch problem necessitates efficient algorithmic solutions. The proposed heuristic algorithm demonstrates that it can approximate optimal solutions with significantly reduced computation time, making it suitable for real-time applications.

Key Results

  • Reduced Latency: SCION-based communication demonstrated significantly lower latencies compared to BGP. The 99th percentile latency under SCION was approximately 410 ms, while BGP was around 480 ms, a reduction of about 70 ms.
  • Improved Frequency Nadir: The proposed heuristic algorithm, by effectively managing communication delays and optimizing reserve allocation, was able to approximate the optimal frequency nadir achieved by a commercial solver, while ensuring frequency security.
  • Computational Efficiency: The heuristic algorithm achieved substantial speedups compared to a global optimization solver. For a large number of devices (e.g., 100,000), the heuristic algorithm with acceleration techniques could complete computations within 100 ms, whereas the optimization solver faced exponential increases in computation time and memory requirements.
  • Cost-Effectiveness: The heuristic algorithm's total FFR costs closely aligned with those calculated by the optimization solver, indicating its ability to achieve near-optimal economic dispatch.

Limitations and Future Work

  • Discretization Error: The paper acknowledges a slight conservativeness in the heuristic algorithm's frequency nadir due to discretization errors arising from using maximum capacity activation in the last iteration. This leads to a slightly higher total cost than the optimized result.
  • Hardware-in-the-Loop (HIL) Simulation: The authors suggest future work to implement the proposed strategy using HIL simulations to evaluate its practicality and integration potential in real-world dispatch systems.
  • Minimum Hardware Requirement Assessment: Further research is recommended to assess the minimum hardware requirements for deploying this strategy on real-world dispatch engines, aligning with cost-benefit principles.

Summary updated

Abstract

System operators can increasingly exploit distributed energy resources (DERs) and controllable loads (CLs) to provide frequency response services. In conventional practice, communication between the system operator and flexible devices relies on the Border Gateway Protocol (BGP)-based Internet. However, existing BGP-based architectures face challenges in providing latency-guaranteed control, while direct private and proprietary communication networks lead to additional deployment and maintenance costs. In contrast, the SCION-based Internet architecture supports latency-minimum path selection, which makes it suitable for latency-sensitive frequency contingency services such as fast frequency response (FFR). Hence, this paper proposes a real-time reserve dispatch framework to optimally select a portfolio of flexible devices to deliver FFR services using the SCION-based Internet. First, an analytical expression of the system frequency dynamics with respect to heterogeneous communication latencies is derived. Next, a cyber-physical co-optimization model is formulated to jointly schedule communication paths and physical flexibility resources for real-time FFR provision. To improve the computation efficiency, we propose a heuristic FFR allocation algorithm to approximate the optimal response portfolio, integrating contributions from both DERs and CLs. Numerical case studies demonstrate the benefits of the proposed algorithm and its capability to approximate the optimality of the reserves allocation while significantly reducing the computation time.
BibTeX
@misc{zhang2026fast,
  author = {Jialun Zhang and Felix Kottmann and Jimmy Chih-Hsien Peng and Adrian Perrig and Gabriela Hug},
  title = {{Fast frequency response with heterogeneous communication delay management under the SCION Internet architecture}},
  year = {2026},
  eprint = {2601.06879},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2601.06879},
}
Figure