Facet-dependent electrocatalytic water splitting reaction on CeO2: A DFT + U study

Tiantian Wu, Núria López, Tejs Vegge, Heine Anton HansenJournal of Catalysis 2020 · DOI

TL;DR

This study uses DFT+U calculations to investigate the facet-dependent electrocatalytic water splitting reaction on ceria (CeO₂). The authors reveal that the (110) and (100) facets are more reactive than the (111) facet, with the (110) facet showing the most efficient pathways, particularly at higher temperatures. This work provides crucial insights into optimizing ceria-based catalysts for hydrogen production by understanding how surface structure influences reaction mechanisms.

What Problem Does This Paper Address?

The efficient production of hydrogen through water splitting is a critical goal for sustainable energy. Solid oxide electrolysis cells (SOECs) offer a promising route, and ceria (CeO₂) is a highly efficient and attractive catalyst for this process, especially at high temperatures. While the water splitting reaction (WSR) on the (111) facet of ceria has been extensively studied, the behavior on other commonly exposed low-index surfaces, namely the (110) and (100) facets, remains less clear. Specifically, understanding how temperature and surface structure (facet) influence the formation of reaction intermediates like hydroxyls and oxygen vacancies, and consequently the overall reaction pathway, is crucial for designing better ceria-based catalysts. This paper aims to fill this knowledge gap by systematically comparing the WSR on these different ceria facets.

Methods

The researchers employed spin-polarized Density Functional Theory (DFT) calculations, augmented with a Hubbard U term (DFT+U), to accurately describe the electronic structure of ceria, particularly the localization of electrons on the 4f orbitals of Ce³⁺. They used the Vienna Ab initio Simulation Package (VASP) with the Perdew-Burke-Ernzerhof (PBE) functional and projector augmented-wave (PAW) method. For modeling the surfaces, they constructed slab models of CeO₂(110) and CeO₂(100) with specific numbers of atomic layers and vacuum gaps to prevent interactions between periodic units. The climbing image nudged-elastic band (CI-NEB) method was used to determine transition states and activation energies for various reaction steps.

Datasets

Not discussed in the paper. The study relies on computational simulations rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Facet-Dependent Reactivity: The study strongly confirms that the water splitting reaction on ceria is highly dependent on the exposed facet. The (110) and (100) facets are significantly more reactive than the (111) facet.
  • Hydroxyl Stability and Inhibition: Hydroxyls are more stable on the (100) facet compared to (110) and (111). This higher stability on CeO₂(100) inhibits the decomposition of hydroxyls into H₂, making the WSR slower on this facet.
  • Temperature Sensitivity of (110) Facet: The most efficient WSR pathway on the (110) facet is highly sensitive to temperature. At lower temperatures (800 K), the fully hydroxylated surface is favored, while at higher temperatures (1200 K), partially hydroxylated surfaces become more efficient.
  • Oxygen Vacancy Formation: The (110) and (100) facets are more easily reduced (form oxygen vacancies) than the (111) facet, which is crucial for initiating the water dissociation process.
  • Ce³⁺ Distribution Sensitivity: The distribution of Ce³⁺ ions, which are key to the redox mechanism of ceria, is more sensitive to hydrogen adsorption sites and the location of oxygen vacancies on the (110) facet compared to the (100) and (111) facets.

Key Results

  • The WSR on the (110) and (111) facets is 10-100 times faster than on the (100) facet at temperatures below 950 K.
  • The formation of hydroxyls and vacancy-hydroxyl mixed phases on the (100) facet is more stable than on the (110) and (111) facets.
  • The most favorable reaction pathway on the (110) facet shifts from fully hydroxylated surfaces at 800 K to partially hydroxylated surfaces at higher temperatures.
  • At temperatures above 950 K, the facet-dependence of the WSR on ceria diminishes, with the (110) facet showing TOF values close to the (111) facet.

Limitations and Future Work

  • Computational Model: While DFT+U is a powerful tool, it is still a model and may not perfectly capture all the complexities of real catalytic systems, such as surface defects, impurities, or the influence of the electrolyte in SOECs.
  • Temperature Range: The study focuses on a specific temperature range (400-1200 K). While this covers typical SOEC operating conditions, exploring extreme temperatures could reveal further insights.
  • Experimental Validation: The findings are based on theoretical calculations and would benefit from direct experimental validation to confirm the predicted facet-dependent reactivities and optimal conditions.

The authors suggest that their findings provide a deeper understanding of the WSR on ceria and can be extended to other electrocatalytic reactions on ceria-based catalysts, such as CO oxidation and NO reduction. The detailed mapping of reaction pathways across different facets and temperatures offers a strong foundation for designing more efficient ceria catalysts for hydrogen production.

Summary updated

BibTeX
@article{wu2020facet,
  author = {Tiantian Wu and Núria López and Tejs Vegge and Heine Anton Hansen},
  title = {{Facet-dependent electrocatalytic water splitting reaction on CeO2: A DFT + U study}},
  journal = {Journal of Catalysis},
  year = {2020},
  doi = {10.1016/j.jcat.2020.05.001},
}
Figure