Fabrication of ZnCoO nanowires and characterization of their magnetic properties

Bum-Su Kim, Seunghun Lee, Won-Kyung Kim, Ji Hun Park, Yong Chan Cho, Jungdae Kim, Chae‐Ryong Cho, Se‐Young JeongNanoscale 2014 · DOI

Abstract

Hydrogen-treated ZnCoO exhibits magnetic behavior attributed to the formation of Co-H-Co complexes. However, the connectivity and directional ordering of these complexes remain poorly understood. ZnCoO nanowires represent an ideal system for investigating this magnetic anisotropy. In this study, ZnCoO nanowires were synthesized using a trioctylamine solution method under various ambient gas conditions. The oxidation of trioctylamine was found to be essential for high-quality nanowire growth. While as-grown and vacuum-treated nanowires were paramagnetic, hydrogen injection induced robust ferromagnetism, significantly stronger than that observed in bulk powders. This enhanced ferromagnetism is explained by the percolation of Co-H-Co complexes along the nanowire's c-axis.

Introduction

Diluted magnetic semiconductors (DMS), such as cobalt-doped zinc oxide (ZnCoO), are pivotal for the advancement of spintronics, where electron spin is harnessed alongside charge for information processing. A major challenge in this field is distinguishing between intrinsic ferromagnetism and extrinsic effects caused by impurities or secondary phases. Furthermore, understanding how hydrogen mediates magnetism in one-dimensional (1D) systems like nanowires is crucial for exploiting magnetic anisotropy in nanoscale devices.

Methods and Materials

The synthesis utilized a trioctylamine solution method. Precursors, zinc acetate and cobalt acetate, were dissolved in trioctylamine and heated to 310°C. The study investigated the impact of the ambient gas environment during synthesis, comparing continuous Argon (S1), continuous Air (S2), and a restricted "closed" Air environment (S3).

Schematic of the electric furnace setup used for controlling the ambient gas environment during synthesis and treatment.

To isolate intrinsic magnetic properties, the resulting nanostructures underwent vacuum annealing at 800°C to remove organic residues. Hydrogen was subsequently introduced via plasma treatment. Morphology and crystal structure were characterized using Field-Emission Scanning Electron Microscopy (FE-SEM) and X-ray Diffraction (XRD), while magnetic properties were analyzed with a Vibrating Sample Magnetometer (VSM).

Results and Discussion

Morphological Control via Ambient Gas

The ambient gas played a decisive role in determining the final morphology of the ZnCoO. FE-SEM imaging demonstrated that the restricted air environment (S3) was optimal, yielding uniform nanowires with an average length of 2 $\mu$m and a diameter of 40 nm.

FE-SEM images showing the morphological evolution of ZnCoO under different gas conditions: (a,b) Argon, (c,d) continuous Air, and (e,f) restricted Air (S3).

The growth mechanism involves the oxidation of trioctylamine into polar amine oxides. These oxides act as surfactants that selectively passivate the (0001) crystal planes, encouraging anisotropic growth along the c-axis.

Hydrogen-Induced Ferromagnetism

While as-grown samples showed some magnetism, it was determined to be extrinsic due to organic surface residues. Pure, vacuum-annealed ZnCoO is paramagnetic. The critical finding was that hydrogen injection induces a strong ferromagnetic state. In the 1D nanowire structure, Co-H-Co complexes are forced to align and connect (percolate) along the c-axis. This geometric constraint results in a squareness ratio ($M_R/M_S$) more than ten times higher than that of bulk ZnCoO powders, confirming that the 1D geometry significantly enhances magnetic ordering.

Conclusion

This work successfully demonstrates the fabrication of high-quality ZnCoO nanowires and clarifies the role of hydrogen in inducing intrinsic ferromagnetism. The enhanced magnetic properties observed in these 1D structures, driven by the alignment of Co-H-Co complexes along the c-axis, provide a clear pathway for developing materials with tailored magnetic anisotropy for future spintronic applications.

Summary updated

Abstract

Hydrogen-treated ZnCoO shows magnetic behavior, which is related to the formation of Co-H-Co complexes. However, it is not well known how the complexes are connected to each other and with what directional behavior they are ordered. In this point of view, ZnCoO nanowire is an ideal system for the study of the magnetic anisotropy. ZnCoO nanowire was fabricated by trioctylamine solution method under different ambient gases. We found that the oxidation of trioctylamine plays an essential role on the synthesis of high-quality ZnCoO nanowires. The hydrogen injection to ZnCoO nanowires induced ferromagnetism with larger magnetization than ZnCoO powders, while becoming paramagnetic after vacuum heat treatment. Strong ferromagnetism of nanowires can be explained by the percolation of Co-H-Co complexes along the c-axis.
BibTeX
@inproceedings{kim2014fabrication,
  author = {Bum-Su Kim and Seunghun Lee and Won-Kyung Kim and Ji Hun Park and Yong Chan Cho and Jungdae Kim and Chae‐Ryong Cho and Se‐Young Jeong},
  title = {{Fabrication of ZnCoO nanowires and characterization of their magnetic properties}},
  booktitle = {Nanoscale},
  year = {2014},
  doi = {10.1186/1556-276x-9-221},
}
Figure