Fabrication and Wettability of Nanoporous Silver Film on Copper from Choline Chloride-Based Deep Eutectic Solvents

Changdong Gu, Xiaoling Xu, Jiangping TuThe Journal of Physical Chemistry C 2010 · DOI

Abstract

Nanoporous Ag films on copper alloy substrates were fabricated by the galvanic replacement reaction from the choline chloride-based deep eutectic solvents (DES) containing AgCl. It was found that the morphologies of the films were largely dependent on AgCl concentrations and plating temperatures. Interestingly, self-assembled nanoporous network of Ag films with ligament and channel width in the range of 20−80 nm was formed on the copper alloy substrate from 0.01 M AgCl DES solution either at room temperature or at 50 °C. The as-deposited porous Ag films exhibited hydrophilic properties. On the contrary, after surface modification by a monolayer of n-dodecanethiol, the contact angle of porous Ag film increased largely with plating times, and a superhydrophobic surface was finally obtained with a contact angle of 160 ± 1°. Wenzel and Cassie−Baxter models were used to qualitatively illustrate the importance of the surface roughness of the Ag films to the wetting property.
BibTeX
@article{gu2010fabrication,
  author = {Changdong Gu and Xiaoling Xu and Jiangping Tu},
  title = {{Fabrication and Wettability of Nanoporous Silver Film on Copper from Choline Chloride-Based Deep Eutectic Solvents}},
  journal = {The Journal of Physical Chemistry C},
  year = {2010},
  doi = {10.1021/jp105182y},
}

Loading related content...

Figure