Fabrication and properties of spin dependent tunneling junctions with CoFeHfO as free layers

Dexin Wang, Zhenghong Qian, J.m. Daughton, Cathy Nordman, Mark Tondra, D. S. Reed, D. BrownellJournal of Applied Physics 2001 · DOI

Abstract

Spin-dependent tunneling (SDT) structures of Ta–Cu–Ta–CoFeHfO–Al2O3–FeCo–CrPtMn have been deposited by rf diode sputtering. The junctions have been fabricated using photolithographic techniques. A junction magnetoresistive ratio as high as 34% has been obtained after annealing the junctions at 250 °C for 1 h. The junctions have a typical bias voltage of 475 mV at half-maximum magnetoresistance values. The resistance–area–product is about 1 MΩ μm2, and the dc breakdown voltage is about 1.5 V. AlN has also been investigated as a barrier for the junctions. CoFeHfO layers have a high in-plane induced anisotropy field of 65 Oe and a high 4πMs value of 1.2 T, leading to a ferromagnetic resonance frequency higher than 2 GHz. This material has a high bulk resistivity of 1000 μΩ cm, resulting in a small eddy current effect. Therefore, a SDT device with CoFeHfO as the free layer is an attractive candidate for high-speed applications.
BibTeX
@article{wang2001fabrication,
  author = {Dexin Wang and Zhenghong Qian and J.M. Daughton and Cathy Nordman and Mark Tondra and D. S. Reed and D. Brownell},
  title = {{Fabrication and properties of spin dependent tunneling junctions with CoFeHfO as free layers}},
  journal = {Journal of Applied Physics},
  year = {2001},
  doi = {10.1063/1.1357833},
}

Loading related content...

Figure