Fabrication and Irradiation Effect of Inverted Metamorphic Triple Junction GaInP/GaAs/InGaAs Solar Cells

Jing Xu, Kunjie Yang, Qingguo Xu, Xiaofang Zhu, Xin Wang, Ming LuCrystals 2022 · DOI

TL;DR

This paper presents the fabrication of high-efficiency inverted metamorphic triple-junction (IMM3J) solar cells and investigates their performance degradation under 2 MeV proton irradiation. The study reveals that while these cells exhibit excellent initial performance, proton irradiation significantly impacts their efficiency, with the degradation mechanism shifting between subcells at different fluences.

What Problem Does This Paper Address?

Spacecraft rely heavily on solar cells for power, and these cells are constantly exposed to harsh radiation environments, primarily from protons and electrons. This radiation can degrade solar cell performance, jeopardizing mission longevity. While various solar cell technologies exist, triple-junction cells offer high efficiency, making them attractive for space applications. However, achieving optimal performance and understanding their radiation tolerance is crucial. Specifically, this paper addresses the need to understand the effects of medium-energy proton irradiation (2 MeV) on Inverted Metamorphic Triple Junction (IMM3J) GaInP/GaAs/InGaAs solar cells, a promising technology for space due to its high efficiency, radiation resistance, and potential for flexibility. Previous studies have focused on electron irradiation or higher-energy protons, leaving a gap in understanding the specific impact of 2 MeV protons, which are known to cause significant degradation.

Methods

The researchers fabricated IMM3J GaInP/GaAs/InGaAs solar cells using metalorganic chemical vapor deposition (MOCVD). The fabrication process involved growing the subcells in an inverted order on a temporary GaAs substrate, followed by an epitaxial lift-off and transfer to a Si-handle. This "inverted metamorphic" approach helps minimize the impact of dislocations from buffer layers.

To assess radiation effects, the fabricated solar cells were subjected to 2 MeV proton irradiation using a tandem accelerator. The irradiation was performed at room temperature in a vacuum chamber with varying proton fluences, ranging from 2 x 10¹¹ cm⁻² to 2 x 10¹² cm⁻².

Characterization of the solar cells was conducted both before (Beginning of Life - BOL) and after irradiation (End of Life - EOL). This involved:

  • Current-Voltage (I-V) measurements: Using an X25A solar simulator under AM0 spectrum to determine key parameters like short-circuit current density (Jsc), open-circuit voltage (Voc), fill factor (FF), and overall efficiency (η).
  • External Quantum Efficiency (EQE) measurements: Employing a spectral response measurement system to analyze the performance of each individual subcell (GaInP, GaAs, and InGaAs) across different wavelengths. This allowed for the identification of which subcell was most affected by the irradiation.

Datasets

Not discussed in the paper. The study focuses on the fabrication and characterization of self-made solar cells and their response to controlled proton irradiation.

Key Insights and Ideas

  • High Initial Performance: The fabricated IMM3J solar cells demonstrate excellent initial performance, achieving an efficiency of 32.2%, which is competitive with state-of-the-art devices.
  • Proton Irradiation Induces Degradation: As expected, 2 MeV proton irradiation leads to a significant decrease in the performance of the IMM3J solar cells, with efficiency showing the most pronounced degradation.
  • Subcell-Specific Degradation: The EQE measurements reveal that the GaInP top cell exhibits remarkable radiation resistance, with minimal degradation. In contrast, the GaAs middle cell and the InGaAs bottom cell are more susceptible to proton-induced damage.
  • Shifting Current-Limiting Junction: A crucial finding is the dynamic nature of the current-limiting junction. Initially, the GaInP subcell acts as the bottleneck. However, with increasing proton fluence, the current-limiting junction shifts to the GaAs subcell and eventually to the InGaAs subcell. This implies that the overall cell performance degradation is dictated by the weakest link, which changes with irradiation dose.
  • Fluence-Dependent Degradation: The degree of degradation in Jsc, Voc, FF, and η is directly correlated with the proton fluence. Higher fluences result in more severe performance loss.

Key Results

  • BOL Performance: The fabricated IMM3J solar cells achieved an average efficiency of 31.1% and a maximum efficiency of 32.2% at the beginning of life (BOL). Average Jsc was 16.5 mA/cm², average Voc was 3097.5 mV, and average FF was 82.2%.
  • EOL Performance (at 2 x 10¹² cm⁻² fluence): After irradiation with 2 MeV protons at the highest fluence (2 x 10¹² cm⁻²), the solar cells retained 93.8% of their initial Jsc, 83.1% of their Voc, 93.3% of their FF, and only 73.4% of their initial efficiency.
  • EQE Degradation: EQE degradation was minimal for the GaInP subcell, moderate for the GaAs subcell, and most significant for the InGaAs subcell, particularly at longer wavelengths corresponding to the InGaAs absorption range.

Limitations and Future Work

  • Limited Energy Range: The study focuses on 2 MeV proton irradiation. The authors acknowledge that the space radiation environment encompasses a broad range of proton and electron energies. Therefore, more research on irradiation effects at other energies is needed for comprehensive space application assessment.
  • Defect Characterization: While the study identifies performance degradation, it doesn't delve into the specific types of radiation-induced defects. Future work should involve techniques like Deep-Level Transient Spectroscopy (DLTS) to characterize these defects, especially in the InGaAs subcell, to better understand the underlying damage mechanisms.
  • Structural Optimization: The authors suggest that understanding the irradiation effects at different energies, particularly those that cause the range of protons to end within the middle or bottom subcells, is crucial for optimizing the solar cell structure and improving radiation resistance.
  • Broader Environmental Testing: While this study focuses on proton irradiation, future work could also investigate the combined effects of protons and electrons, as well as other space environmental factors.

Summary updated

Abstract

Inverted metamorphic triple junction (IMM3J) GaInP/GaAs/InGaAs solar cells have the advantages of high efficiency, excellent radiation resistance, lightweight and flexible properties, especially suitable for space application. In this paper, we first fabricate the IMM3J GaInP/GaAs/InGaAs solar cell, which has a short circuit current density of 16.5 mA/cm2, an open circuit voltage of 3141.8 mV, a fill factor of 84.3%, and an efficiency of 32.2%. Then, the IMM3J solar cell is irradiated by 2 MeV protons with different fluences from 2 × 1011 cm−2 to 2 × 1012 cm−2. Finally, the output electrical properties of IMM3J solar cells at the beginning of life and end of life are analyzed by current-voltage characterization. The degradation behaviors of each subcell before and after irradiation can also be described by the external quantum efficiency and short circuit current density.
BibTeX
@inproceedings{xu2022fabrication,
  author = {Jing Xu and Kunjie Yang and Qingguo Xu and Xiaofang Zhu and Xin Wang and Ming Lu},
  title = {{Fabrication and Irradiation Effect of Inverted Metamorphic Triple Junction GaInP/GaAs/InGaAs Solar Cells}},
  booktitle = {Crystals},
  year = {2022},
  doi = {10.3390/cryst12050670},
}

Loading related content...

Figure