Fabrication and Characterization of Pre-Defined Few-Layer Graphene

Tingting Wang, Liangguang Jia, Quanzhen Zhang, Ziqiang Xu, Zeping Huang, Peiwen Yuan, Baofei Hou, Xuan Song, Kaiqi Nie, Chen Liu, Jiaou Wang, Huixia Yang, Liwei Liu, Teng Zhang, Yeliang WangPhyschem 2022 · DOI

TL;DR

This paper presents a reliable method for fabricating few-layer graphene (FLG) with a controlled number of layers on a silicon carbide (SiC) substrate using thermal decomposition. They also introduce a non-damaging technique using synchrotron X-ray photoelectron spectroscopy (SR-XPS) to accurately measure the FLG thickness, crucial for its application in future electronics.

What Problem Does This Paper Address?

Graphene, a revolutionary 2D material, has incredible electronic and optical properties. However, its behavior is highly dependent on its thickness, especially when it's in few-layer form (FLG). For FLG to be effectively used as a substrate or in devices, researchers need to reliably create FLG with a specific, known number of layers and accurately measure that thickness. Existing methods for thickness characterization, like Raman spectroscopy or AFM, have limitations, such as being less accurate for FLG or potentially damaging the sample. This paper aims to bridge this gap by providing a robust fabrication method and a precise, non-destructive characterization technique for FLG.

Methods

The researchers employed a bottom-up synthesis approach using thermal decomposition of a 4H-SiC substrate. This involves heating the SiC to high temperatures (around 1300 °C) in a vacuum. At these temperatures, silicon atoms evaporate from the surface, leaving behind carbon atoms that self-assemble into graphene layers. A key aspect of this method is the formation of a "buffer layer" between the graphene and the SiC substrate, which is covalently bonded to the SiC and weakly interacts with the graphene layers via van der Waals forces.

For characterization, they utilized Scanning Tunneling Microscopy (STM) to visualize the surface morphology and confirm the presence of graphene with atomic resolution. The core of their thickness determination method relies on Synchrotron Radiation X-ray Photoelectron Spectroscopy (SR-XPS). The novelty here lies in how they use SR-XPS: by varying the photon energy of the X-rays, they can control the inelastic mean free path (IMFP) of the emitted electrons. This allows them to probe different depths within the sample. By analyzing the intensity ratio of the carbon signals originating from the graphene layers versus the SiC substrate at different photon energies, they can accurately estimate the FLG thickness without damaging the sample. They adapted a standard "attenuation method" to work with a single sample by carefully analyzing the intensity ratios across various photon energies.

Datasets

Not discussed in the paper. The study focuses on the fabrication and characterization of graphene samples prepared by the authors.

Key Insights and Ideas

  • Controlled FLG Fabrication: The thermal decomposition of SiC is shown to be a reproducible method for creating FLG with a pre-defined average thickness, specifically around 5 layers.
  • Buffer Layer Significance: The presence of a buffer layer between graphene and SiC is highlighted, which has distinct bonding characteristics and influences the overall structure.
  • SR-XPS as a Non-Damaging Thickness Probe: The paper demonstrates that SR-XPS, by tuning photon energy to control probe depth, offers a highly accurate and non-destructive way to measure FLG thickness, overcoming limitations of other techniques.
  • Thickness-Property Correlation: The authors emphasize that controlling FLG thickness is crucial because it directly impacts the material's electronic and optical properties, making precise characterization essential for device applications.
  • Improved Attenuation Method: The adaptation of the attenuation method for thickness estimation using SR-XPS on a single sample is a significant methodological advancement.

Key Results

  • The thermal decomposition method successfully fabricated few-layer graphene on 4H-SiC with a reproducible average thickness of approximately 15 Å (around 5 layers).
  • STM images confirmed the atomic resolution and hexagonal honeycomb structure of the graphene, with moiré patterns observed in FLG, indicating the stacking order.
  • SR-XPS measurements, using photon energies from 495 eV to 900 eV, allowed for the estimation of FLG thickness.
  • The thickness estimation method using SR-XPS showed excellent accuracy, with an overall error bar of less than 0.4 Å for energies between 600-900 eV.
  • The calculated thickness for the FLG samples was consistently around 15 Å, aligning with the expected number of layers.

Limitations and Future Work

  • Low Energy SR-XPS Limitation: The paper notes that at very low photon energies (e.g., 382 eV and 392 eV), the surface sensitivity is too high, and the inelastic mean free path is too short, making it difficult to properly estimate the SiC substrate signal and thus the FLG thickness.
  • Future Work: The authors express their intention to extend these fabrication and characterization methods to other 2D materials in the future, aiming to provide suitable 2D substrates for a broader range of 2D electronic research. They believe this work lays the groundwork for developing advanced 2D electronic devices.

Summary updated

Abstract

Graphene is one of the most well-known two-dimensional (2D) materials that has attracted significant interest due to its unique electrical and optical properties. Being a van der Waals substrate, the fabrication of few-layered graphene by stacking a pre-defined number of graphene monolayers is essential in the field. The thickness can influence the interface interaction and therefore tune the surface electronic properties. In the study, we demonstrate a bottom-up synthesis of pre-defined few-layer graphene on SiC substrate using the thermal decomposition method and carefully characterize its thickness by the non-damageable synchrotron-radiation-based X-ray photo-electron spectroscopy (SR-XPS). By varying the photon energy, we acquire different probe depths, resulting in the different intensity ratios of graphene to SiC substrate, which is then used to estimate the thickness of the few-layer graphene. Our calculation demonstrates that the thermal decomposition method in the study can repeatedly fabricate graphene samples with expected thickness. We further compare the obtained few-layer graphene to the single-layer graphene and HOPG using the scanning tunneling microscopy (STM) technique. Our work provides accurate methods for fabricating and characterizing pre-defined few-layer graphene, providing essential knowledge in future graphene-based thin film electronics.
BibTeX
@inproceedings{wang2022fabrication,
  author = {Tingting Wang and Liangguang Jia and Quanzhen Zhang and Ziqiang Xu and Zeping Huang and Peiwen Yuan and Baofei Hou and Xuan Song and Kaiqi Nie and Chen Liu and Jiaou Wang and Huixia Yang and Liwei Liu and Teng Zhang and Yeliang Wang},
  title = {{Fabrication and Characterization of Pre-Defined Few-Layer Graphene}},
  booktitle = {Physchem},
  year = {2022},
  doi = {10.3390/physchem3010002},
}

Loading related content...

Figure