Extrinsic calibration of non-overlapping camera-laser system using structured environment

Yunsu Bok, Dong-Geol Choi, Pascal Vasseur, In-So KweonIROS 2014 · OpenReview

Abstract

In this paper are presented simple and practical solutions to extrinsic calibration between a camera and a 2D laser sensor, without overlap. Previous methods utilized a plane or an intersecting line of two planes as a geometric constraint with enough common field-of-view. These required additional sensors to calibrate non-overlapping systems. In this paper, we present two methods for solving the problem - one utilizes a plane; the other utilizes an intersecting line of two planes. For each method, an initial solution of the relative positions of a non-overlapping camera and a laser sensor, was computed by adopting a reasonable assumption about geometric structures. Then we refined it via non-linear optimization, even if the assumption was not perfectly satisfied. Both simulation results and experiments using real data showed that the proposed methods provided reliable results compared to ground-truth, and similar or better results than those provided by a conventional method.
BibTeX
@inproceedings{bok2014extrinsic,
  author = {Yunsu Bok and Dong-Geol Choi and Pascal Vasseur and In-So Kweon},
  title = {{Extrinsic calibration of non-overlapping camera-laser system using structured environment}},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year = {2014},
  url = {https://openreview.net/forum?id=UCIo3pgVFP4},
}

Loading related content...

Figure