Extremely Large-Scale Dynamic Metasurface Antennas for 6G Near-Field Networks: Opportunities and Challenges

Haiyang Zhang, Nir Shlezinger, Giulia Torcolacci, Francesco Guidi, Anna Guerra, Qiang Yang, Mohammadreza F. Imani, Davide Dardari, Yonina C. EldararXiv 2025 · DOI · arXiv

Abstract

6G networks will need to support higher data rates, high-precision localization, and imaging capabilities. Near-field technologies, enabled by extremely large-scale (XL)-arrays, are expected to be essential physical-layer solutions to meet these ambitious requirements. However, implementing XL-array systems using traditional fully-digital or hybrid analog/digital architectures poses significant challenges due to high power consumption and implementation costs. Emerging XL-dynamic metasurface antennas (XL-DMAs) provide a promising alternative, enabling ultra-low power and cost-efficient solutions, making them ideal candidates for 6G near-field networks. In this article, we discuss the opportunities and challenges of XL-DMAs employed in 6G near-field networks. We first outline the fundamental principles of XL-DMAs and present the specifics of the near-field model of XL-DMAs. We then highlight several promising applications that might benefit from XL-DMAs, including near-field communication, localization, and imaging. Finally, we discuss several open problems and potential future directions that should be addressed to fully exploit the capabilities of XL-DMAs in the next 6G near-field networks.

Introduction

As 6G wireless communication moves toward extremely large-scale (XL) antenna arrays operating at mmWave and THz frequencies, the industry is entering the "near-field" regime. In this regime, traditional planar wave assumptions fail as radio waves exhibit spherical wavefronts. While this shift introduces complexity, it also offers unique advantages like high-precision beam focusing and centimeter-level localization.

However, two major hurdles impede the adoption of traditional XL-arrays:

  1. The Power/Cost Wall: Traditional fully-digital or hybrid architectures require a massive number of power-hungry RF chains and expensive phase shifters.
  2. Near-Field Modeling: Signal processing designed for far-field planar waves becomes inaccurate, missing the benefits of spherical wave propagation.

XL-DMA Architecture and Modeling

To address these challenges, this paper proposes Dynamic Metasurface Antennas (XL-DMAs). These antennas leverage reconfigurable metamaterial elements embedded in microstrip waveguides to perform signal processing in the analog domain by tuning element resonant properties.

Schematic of the XL-DMA architecture and the near-field channel model, illustrating the internal propagation within microstrips and the external spherical wavefronts.

The proposed framework includes a two-part near-field channel model:

  • External Wireless Channel: Accounts for spherical wavefronts and spatial non-stationarity.
  • Internal Propagation Channel: Models the signal flow within the microstrip waveguides toward the output ports.

By utilizing sub-wavelength element spacing, XL-DMAs achieve holographic beamforming, providing finer control over the electromagnetic field than standard half-wavelength arrays.

Key Insights: From Steering to Focusing

In the near-field, XL-DMAs transition from beam "steering" (angle-based) to beam "focusing" (distance and angle-based). This allows energy to be concentrated at a specific point, significantly reducing multi-user interference. Furthermore, the spherical wavefronts enable a single XL-DMA to estimate a user's position via the Curvature of Arrival (CoA), potentially eliminating the need for multiple anchor nodes.

Performance Evaluation

Numerical simulations at 28 GHz demonstrate the superior performance of XL-DMAs compared to traditional architectures.

Achievable rate versus antenna length, showing that XL-DMAs with quarter-wavelength spacing outperform traditional half-wavelength digital and hybrid arrays.
  • Achievable Rate: XL-DMAs with quarter-wavelength spacing outperform both fully-digital and hybrid half-wavelength arrays as antenna length increases, due to the increased channel rank provided by higher element density.
  • Localization Accuracy: XL-DMAs achieve centimeter-level Root Mean Square Error (RMSE), matching fully-digital performance while using significantly fewer RF chains.
  • Imaging Quality: In reconstruction tests of the letters "NUPT," quarter-wavelength XL-DMAs produced higher-fidelity images than standard digital arrays, showcasing superior spatial resolution for holographic imaging.

Challenges and Future Directions

Despite their potential, several open problems remain:

  • AI-Based Configuration: Real-time optimization of thousands of metamaterial elements is computationally intensive, suggesting a need for deep learning solutions.
  • Distributed Architectures: Coordinating multiple distributed XL-DMA panels introduces synchronization and channel estimation challenges.
  • Hardware Constraints: Issues such as mutual coupling between closely packed elements and frequency-dependent power amplifier efficiency require further over-the-air testing.
  • Polarization: Future designs may exploit polarization diversity to further boost capacity, though hardware implementation is currently in its early stages.

Summary updated

Abstract

6G networks will need to support higher data rates, high-precision localization, and imaging capabilities. Near-field technologies, enabled by extremely large-scale (XL)-arrays, are expected to be essential physical-layer solutions to meet these ambitious requirements. However, implementing XL-array systems using traditional fully-digital or hybrid analog/digital architectures poses significant challenges due to high power consumption and implementation costs. Emerging XL-dynamic metasurface antennas (XL-DMAs) provide a promising alternative, enabling ultra-low power and cost-efficient solutions, making them ideal candidates for 6G near-field networks. In this article, we discuss the opportunities and challenges of XL-DMAs employed in 6G near-field networks. We first outline the fundamental principles of XL-DMAs and present the specifics of the near-field model of XL-DMAs. We then highlight several promising applications that might benefit from XL-DMAs, including near-field communication, localization, and imaging. Finally, we discuss several open problems and potential future directions that should be addressed to fully exploit the capabilities of XL-DMAs in the next 6G near-field networks.
BibTeX
@misc{zhang2025extremely,
  author = {Haiyang Zhang and Nir Shlezinger and Giulia Torcolacci and Francesco Guidi and Anna Guerra and Qiang Yang and Mohammadreza F. Imani and Davide Dardari and Yonina C. Eldar},
  title = {{Extremely Large-Scale Dynamic Metasurface Antennas for 6G Near-Field Networks: Opportunities and Challenges}},
  year = {2025},
  eprint = {2508.06952},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2508.06952},
  howpublished = {arXiv},
}
Figure