Exploiting Movable-Element STARS for Wireless Communications

Jingjing Zhao, Quan Zhou, Xidong Mu, Kaiquan Cai, Yanbo Zhu, Yuanwei LiuarXiv 2024 · DOI · arXiv

TL;DR

This paper introduces ME-STARS, a novel wireless surface that combines the "full-space" coverage of simultaneously transmitting and reflecting surfaces (STARS) with the flexibility of movable elements. By dynamically adjusting the physical positions of the surface elements alongside traditional beamforming, the system achieves significantly higher data rates—up to 20% better than fixed-position surfaces—especially in crowded environments with many users and signal scatterers.

What Problem Does This Paper Address?

In the quest for 6G, researchers have turned to Reconfigurable Intelligent Surfaces (RIS) to "steer" wireless signals. However, conventional RIS has two major limitations:

  1. Half-Space Constraint: Most RIS can only reflect signals, meaning the transmitter and receiver must be on the same side of the surface.
  2. Fixed Geometry: Elements are usually fixed in a grid (Fixed-Position Antennas or FPAs). This rigid structure cannot fully exploit the "spatial degrees of freedom" available in the continuous electromagnetic environment.

While "STARS" technology solves the first problem by allowing a surface to both transmit and reflect signals (providing 360-degree coverage), it still typically relies on fixed elements. This paper proposes Movable-Element STARS (ME-STARS), allowing the surface elements to slide within a defined region to find the "sweet spots" in a complex multipath environment, thereby maximizing the communication rate.

Methods

The authors formulate a Weighted Sum Rate (WSR) maximization problem, which is notoriously difficult because it involves jointly optimizing three highly coupled variables: the active beamforming at the base station, the passive beamforming (phase shifts) at the STARS, and the physical positions of the STARS elements.

To solve this, they develop an Alternating Optimization (AO) framework that breaks the problem into three manageable subproblems:

  • Position Optimization: They use a Gradient Descent Algorithm (GDA). To handle the physical constraints (keeping elements within the surface and preventing them from colliding), they employ a clever "penalty method" and a coordinate transformation using hyperbolic tangent functions.
  • Active Beamforming: They apply the standard Weighted Minimum Mean Square Error (WMMSE) approach.
  • Passive Beamforming: They use Successive Convex Approximation (SCA) to handle the non-convex constraints of the STARS transmission and reflection coefficients.

The paper evaluates this across three operating protocols: Energy Splitting (ES) (elements do both simultaneously), Mode Switching (MS) (elements are either T or R), and Time Switching (TS) (the whole surface toggles between T and R over time).

Datasets

The paper relies on numerical simulations rather than physical datasets.

  • The authors generated $10^3$ random user distributions and channel realizations to validate their models.
  • The simulation environment uses a geometric channel model with specific parameters: a 3 GHz carrier frequency, a base station with 8 antennas, and a STARS surface with 8 movable elements serving 4 users.
  • Benchmarks include conventional Fixed-Position STARS (FPE-STARS) and a Movable-Element RIS (ME-RIS) that only reflects.

Key Insights and Ideas

  • Spatial Diversity vs. Beamforming: The "aha moment" is that moving an element by just a fraction of a wavelength can drastically change the constructive or destructive interference patterns. ME-STARS doesn't just "steer" the beam; it reshapes the channel itself to be more favorable.
  • The "Crowding" Advantage: The performance gain of ME-STARS over fixed surfaces actually increases as you add more users or more scatterers (like buildings or trees). In a "clean" environment, fixed antennas do fine; in a "messy" one, the ability to move elements to avoid interference becomes a superpower.
  • Protocol Flexibility: While Energy Splitting (ES) offers the best performance due to its high flexibility, the authors show that their optimization framework is robust enough to be adapted for simpler hardware implementations like Mode Switching.

Key Results

  • Significant Rate Gains: ME-STARS (ES protocol) outperforms fixed-position STARS by approximately 20.15% in average weighted sum rate.
  • Region Size Matters: As the normalized moving region size increases from $2.5\lambda$ to $4.5\lambda$, the performance gain for the ES protocol jumps from 27.57% to 47.13% compared to fixed elements.
  • Full-Space Superiority: ME-STARS consistently outperforms ME-RIS (reflecting-only) because it can serve users on both sides of the surface simultaneously, effectively doubling the service area.

Limitations and Future Work

  • Hardware Realization: The paper focuses on the mathematical theory and optimization. In practice, building a surface where elements can slide rapidly and precisely is a significant mechanical and electronic challenge.
  • CSI Overhead: The model assumes perfect Channel State Information (CSI). Estimating the channel for every possible position of a movable element is computationally expensive and could be a bottleneck in real-time systems.
  • 2D vs. 3D: The current study looks at movement on a 2D surface. Future work could explore 3D deployments or more complex surface geometries.
  • Speed of Movement: The authors assume the elements stay put during a single time block. Future research could investigate the impact of element movement speed on channel aging and Doppler effects.

Summary updated

Abstract

A novel movable-element enabled simultaneously transmitting and reflecting surface (ME-STARS) communication system is proposed, where ME-STARS elements positions can be adjusted to enhance the degress-of-freedom for transmission and reflection. For each ME-STARS operating protocols, namely energy-splitting (ES), mode switching (MS), and time switching (TS), a weighted sum rate (WSR) maximization problem is formulated to jointly optimize the active beamforming at the base station (BS) as well as the elements positions and passive beamforming at the ME-STARS. An alternative optimization (AO)-based iterative algorithm is developed to decompose the original non-convex problem into three subproblems. Specifically, the gradient descent algorithm is employed for solving the ME-STARS element position optimization subproblem, and the weighted minimum mean square error and the successive convex approximation methods are invoked for solving the active and passive beamforming subproblems, respectively. It is further demonstrated that the proposed AO algorithm for ES can be extended to solve the problems for MS and TS. Numerical results unveil that: 1) the ME-STARS can significantly improve the WSR compared to the STARS with fixed position elements and the conventional reconfigurable intelligent surface with movable elements, thanks to the extra spatial-domain diversity and the higher flexibility in beamforming; and 2) the performance gain of ME-STARS is significant in the scenarios with larger number of users or more scatterers.
BibTeX
@misc{zhao2024exploiting,
  author = {Jingjing Zhao and Quan Zhou and Xidong Mu and Kaiquan Cai and Yanbo Zhu and Yuanwei Liu},
  title = {{Exploiting Movable-Element STARS for Wireless Communications}},
  year = {2024},
  eprint = {2412.19974},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2412.19974},
}
Figure