Exploitation of Heterogeneity in Distributed Sensing

John Peterson, Tansel Yucelen, Girish Chowdhary, S. KannanarXiv 2015 · DOI · arXiv

Abstract

Most distributed sensing methods assume that the expected value of sensed information is same for all agents ignoring differences in sensor capabilities due to, for example, environmental factors and sensors quality and condition. In this paper, we present a distributed sensing framework to exploit heterogeneity in information provided about a dynamic environment using an active-passive networked multiagent systems approach. Specifically, this approach consists of agents subject to exogenous inputs (active agents) and agents without any inputs (passive agents). In addition, if an active agent senses a quantity accurately (resp., not accurately), then it is weighted high (resp., low) in the network such that these weights can be a function of time due to varying environmental factors. The key feature of our approach is that the states of all agents converge to an adjustable neighborhood of the weighted average of the sensed exogenous inputs by the active agents.

Introduction

Traditional distributed sensing relies on consensus algorithms, where agents communicate to agree on a shared value. Most of these algorithms assume a "homogenous" network where every agent is equally accurate. In reality, networks are heterogeneous: some agents might not have sensors at all (passive agents), while others might have multiple sensors (active agents). Furthermore, the quality of a measurement can change based on distance to a target or sensor degradation. Treating a blurry, distant measurement with the same weight as a sharp, close-up one skews the network's final estimate. This paper proposes a framework that weights information based on its "value," allowing a network to prioritize high-quality data dynamically.

Methodology

The proposed framework utilizes an active-passive networked multiagent systems approach. The network is partitioned into active agents, which receive exogenous inputs from the environment, and passive agents, which only facilitate communication and do not have sensing capabilities.

Conceptual diagram of a heterogeneous sensing network showing active nodes (N1, N2) sensing targets with varying quality and a passive node (N3) connected via communication links.

A key innovation is the introduction of a Value of Information (VoI) weighting variable ($w_{ih}$) for each active agent. This weight represents the expected value of information; it is high for accurate sensing and low for noisy or distant measurements. The core algorithm uses an integral action-based set of differential equations to ensure the entire network—including passive nodes—converges to a weighted average of the inputs. These weights can be time-varying to account for moving targets or changing environmental conditions.

The framework was validated through numerical simulations, including a static target scenario with a four-agent network (two active, two passive) and a moving target scenario with a nine-agent network.

Results and Discussion

The simulations demonstrate that even passive nodes can reach an accurate estimate of the environment by communicating with weighted active nodes. Using Lyapunov stability theory, the authors proved that the error in the network's estimate remains bounded even with time-varying weights.

Comparison of convergence behavior. The top plot shows the proposed method converging to a weighted average (distinct from the simple average), while the bottom plot shows convergence to a simple average.

In the static target example, the heterogeneous weighting allowed the network to converge much closer to the actual weighted average of target quantities compared to standard "identical weight" approaches. In moving target simulations, the heterogeneous approach tracked the actual trajectory with significantly higher fidelity by automatically prioritizing data from agents closest to the target, whereas standard methods exhibited significant lag and deviation.

Conclusion

This research provides a robust method for handling sensor heterogeneity in distributed networks. By incorporating Value of Information weights, networks can achieve higher accuracy and better tracking performance. Future work will address the challenges of calculating VoI in real-time on low-power hardware, handling communication constraints like message drops in lossy networks, and extending the framework to agents with more complex physical dynamics.

Summary updated

Abstract

Most distributed sensing methods assume that the expected value of sensed information is same for all agents ignoring differences in sensor capabilities due to, for example, environmental factors and sensors quality and condition. In this paper, we present a distributed sensing framework to exploit heterogeneity in information provided about a dynamic environment using an active-passive networked multiagent systems approach. Specifically, this approach consists of agents subject to exogenous inputs (active agents) and agents without any inputs (passive agents). In addition, if an active agent senses a quantity accurately (resp., not accurately), then it is weighted high (resp., low) in the network such that these weights can be a function of time due to varying environmental factors. The key feature of our approach is that the states of all agents converge to an adjustable neighborhood of the weighted average of the sensed exogenous inputs by the active agents.
BibTeX
@misc{peterson2015exploitation,
  author = {John Peterson and Tansel Yucelen and Girish Chowdhary and S. Kannan},
  title = {{Exploitation of Heterogeneity in Distributed Sensing}},
  year = {2015},
  eprint = {1502.05298},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1502.05298},
}
Figure