TL;DR
This paper experimentally compares two types of piezoelectric force actuators: inertial-type and frame-type. The frame-type actuator significantly outperforms the inertial-type in terms of transmitted force and power flow, offering a more efficient design for structural actuation.
What Problem Does This Paper Address?
Piezoelectric actuators are crucial for precise motion control in various applications due to their high resolution and accuracy. However, maximizing their force output and understanding how they transfer energy to a structure remains a challenge. Existing inertial-type actuators, while effective, have limitations in directional flexibility and can be susceptible to instability. This paper addresses the need for a comparative performance analysis of different piezoelectric actuator designs, specifically focusing on their ability to generate and transmit force, and how this relates to their underlying mechanical structure. The authors aim to validate existing dynamic models and shed light on the design principles that lead to superior performance.
Methods
The study employs a comparative experimental approach to evaluate two piezoelectric actuator designs: an inertial-type actuator and a frame-type actuator, both utilizing the same encased piezoelectric stack actuator (EPSA).
- Actuator Modeling: The paper reviews and utilizes established dynamic models for both the inertial-type (based on a lumped-element model with mass, damping, and stiffness) and frame-type actuators (incorporating a more complex model with beam dynamics and leg stiffness/damping). The Bouc-Wen model is used to capture the hysteresis behavior of the piezoelectric material.
- Parameter Identification: Key parameters for these models, including piezoelectric coefficients, hysteresis parameters, and mechanical properties, are experimentally identified using methods like Particle Swarm Optimization (PSO) for hysteresis and Experimental Modal Analysis (EMA) for dynamic parameters.
- Experimental Setup: Two distinct test platforms are used: one with a rigid base structure and another with a clamped-clamped elastic beam.
- Transmitted Force Measurement: Force sensors are employed to measure the forces transmitted by the actuators to the base structures. For the frame-type actuator, multiple sensors are used to capture forces at different points.
- Power Flow Measurement: An impedance head is inserted between the actuator and the structure to simultaneously measure force and acceleration. This allows for the calculation of power flow into the structure, a key metric for understanding energy transfer. MATLAB is used for post-processing of the measurement data.
Datasets
Not discussed in the paper. The study relies on experimental data generated from the authors' own test platforms and actuators.
Key Insights and Ideas
- Frame-Type Superiority: The frame-type actuator demonstrates a significant advantage over the inertial-type actuator, generating transmitted forces that are more than two orders of magnitude higher.
- Mechanism of Force Amplification: The superior performance of the frame-type actuator is attributed to the interplay of its stiffness and damping components. In the inertial-type actuator, the stiffness force component opposes the PZT electrical force, leading to a destructive superposition and reduced transmitted force. In contrast, the frame-type actuator's stiffness force is much smaller, allowing the PZT electrical force to dominate and result in a larger transmitted force.
- Structural Confinement vs. Inertial Mass: The frame-type actuator's structure, anchored by legs, limits its displacement and effectively channels the force. The inertial-type actuator relies on a large top mass to amplify displacement, which can lead to large amplitudes but also a less efficient force transfer mechanism due to the opposing stiffness.
- Power Flow Efficiency: The frame-type actuator also exhibits a substantially higher input power flow into the beam structure, approximately 300 times greater than the inertial-type actuator at the driving frequency. This indicates a more effective transfer of vibrational energy.
- Model Validation: The experimental results closely match the predictions from the developed dynamic models, validating their accuracy and utility for actuator design and analysis.
Key Results
- Transmitted Force: The frame-type actuator achieved transmitted forces over two orders of magnitude greater than the inertial-type actuator.
- Power Flow: At the driving frequency (60 Hz), the total input power flow from the frame-type actuator to the beam was approximately 300 times higher than that of the inertial-type actuator.
- Model Agreement: The overall error between measured and predicted transmitted forces was less than 1 dB at 30 Hz, demonstrating good model validation.
- Displacement Difference: Simulated displacements showed that the frame-type actuator's top beam displacement was two orders of magnitude smaller than the inertial-type actuator's top mass displacement.
Limitations and Future Work
- Limitations:
- The paper notes that background noise (50 Hz driving current and its harmonics) in the test results can cause discrepancies, although it's stated to be less than the signal and not affect the main conclusions.
- The study focuses on specific configurations and excitation frequencies; performance might vary under different conditions.
- Future Work:
- The authors suggest future research will focus on methods to suppress the nonlinear effects of frame-type actuators.
- They also plan to explore the utilization of frame-type actuators in active control of structural vibration.
Summary updated