Experimental Study on SPR Array Sensing Chip Integrated with Microvalves

Wanwan Chen, Peng Wang, Bin Li2024 · DOI

TL;DR

This paper presents a novel microfluidic system integrating pneumatic microvalves with a Surface Plasmon Resonance (SPR) array sensing chip. The system allows for precise, automated control of fluid flow, enabling sequential sample introduction for high-throughput SPR analysis, a crucial step for advancing biochemical and pharmacological research.

What Problem Does This Paper Address?

Surface Plasmon Resonance (SPR) is a powerful label-free optical sensing technique widely used in proteomics and biomolecular interaction studies. However, for high-throughput SPR detection, accurately and efficiently delivering analytes and reagents to the sensing surface is critical. This requires sophisticated microfluidic systems capable of precise fluid control. While microvalves are essential components for this control, their integration into SPR systems, especially for automated, sequential sample introduction, presents challenges. Existing methods for characterizing microvalves are often qualitative or difficult to scale for multiple valves. This paper addresses the need for a reliable, integrated microfluidic system with characterized microvalves that can automate sample delivery for SPR array sensing.

Methods

The core of this work is the design and fabrication of a microfluidic system integrating pneumatic microvalves with an SPR array sensing chip. The microfluidic system is constructed from a multi-layered structure using PDMS (polydimethylsiloxane) for its elasticity and reversibility, and PMMA (polymethylmethacrylate) for structural support and optical clarity.

Key methodological aspects include:

  • Microvalve Design and Simulation: Finite-element analysis (COMSOL 6.1) was used to optimize microvalve design parameters, including channel shape, membrane thickness, and pressure requirements for complete closure.
  • Fabrication: A combination of CNC milling for PMMA molds and soft lithography for PDMS was employed. Oxygen plasma bonding was used to create irreversible seals between layers.
  • Microvalve Characterization: A novel conductivity detection method was developed. This method uses electrodes placed within the microchannels to measure changes in solution conductivity as the microvalve deforms. This allows for quantitative, real-time monitoring of the microvalve's opening and closing dynamics, overcoming limitations of purely visual methods. The system uses a square wave AC voltage to avoid electrolytic effects.
  • System Integration: The microfluidic system, including the microvalves, was integrated with a dual-channel differential interferometric imaging SPR array detection device.
  • SPR Experiments: The integrated system was tested using NaCl solutions of varying concentrations to evaluate its performance in automated sample introduction and SPR detection.

Datasets

Not discussed in the paper. The experiments involved using deionized water as a buffer and 5% NaCl solutions as samples.

Key Insights and Ideas

  • Conductivity-Based Microvalve Characterization: The development of a quantitative conductivity-based method for characterizing microvalves is a significant contribution. This approach allows for simultaneous monitoring of multiple valves and provides dynamic performance data (response time, closure characteristics) that are crucial for system optimization.
  • Optimized Microchannel Design for SPR: The study identified that arc-shaped channels (like NO.2 and NO.3) are easier to shut off, but smaller channels (like NO.1 and NO.3) are preferred for reduced sample consumption. Design NO.3 was ultimately chosen for its balance.
  • Pneumatic Microvalves for Automated SPR: The successful integration and demonstration of pneumatic microvalves for automated, sequential introduction of different solutions (deionized water and NaCl) in an SPR array system is a key achievement. This automates a critical step in SPR experiments.
  • High Reproducibility and Fast Response: The microvalves demonstrated high repeatability in opening and closing operations and a fast closure response (within 1.5 seconds), which is essential for precise control in dynamic biological assays.
  • Addressing Contamination: The study demonstrated the effectiveness of the microvalves in an automated cleaning process, managing and reducing contamination within the microfluidic system.

Key Results

  • Microvalve Closure: Complete microvalve closure was achieved at a control pressure of 0.3 MPa.
  • Fabrication Discrepancies: Actual microchannel height (114.2 µm) and membrane thickness (107.3 µm) slightly exceeded design values (100 µm), likely due to molding process variations. This led to a slightly higher closure pressure (0.3 MPa) than predicted by simulation (0.25 MPa).
  • Repeatability: The microvalve switching process showed high repeatability, with a standard deviation of amplitude of 0.0013 and a standard deviation of rise/fall time of 1.3 s. This was noted as being three times faster than a four-way valve.
  • SPR Detection: The system successfully demonstrated automated sample introduction for SPR array sensing, showing nearly identical phase angle changes across different detection regions, indicating uniform sample delivery and interaction.

Limitations and Future Work

  • Fabrication Errors: The paper acknowledges that fabrication errors (deviations in channel height and membrane thickness, and potential misalignment) led to discrepancies between simulation and experimental results for closure pressure.
  • Limited Field of View for Visual Inspection: The visual method for microvalve observation was limited by the microscope's field of view, preventing simultaneous monitoring of multiple valves. The conductivity method overcomes this.
  • Future Work: The paper suggests that this detection method is versatile and suitable for a range of microfluidic systems equipped with integrated microvalves, implying potential for broader applications beyond SPR. The integration of these microvalves supports automated, accurate experiments, which is essential progress in areas such as biochemistry and pharmacology.

Summary updated

BibTeX
@misc{chen2024experimental,
  author = {Wanwan Chen and Peng Wang and Bin Li},
  title = {{Experimental Study on SPR Array Sensing Chip Integrated with Microvalves}},
  year = {2024},
  doi = {10.3390/s24082540},
}
Figure