Experimental Study on High-Speed Milling Performance of 316 Stainless Steel

Can Liu, Jing Quan Wu, Wei Zheng, G.h. Li, Guang TanApplied Mechanics and Materials 2010 · DOI

Abstract

In order to obtain the variational regularity of force in high-speed milling 316 stainless steel with carbide tools, an orthogonal milling test was done in machining center, and force signal was processed and analysed using Matlab software. Spectrum analysis showed the energy of horizontal force in high-speed milling transfered to the harmonic frequency, variance analysis showed that both of the axial depth of cut and the feed significantly affected the absolute mean of horizontal force, while the effect of speed was insignificant, indicating it be best to adopt milling parameters as small depth of cut, small feed and high speed. The results of this study can be used to guide high-speed milling of 316 stainless steel.
BibTeX
@inproceedings{liu2010experimental,
  author = {Can Liu and Jing Quan Wu and Wei Zheng and G.H. Li and Guang Tan},
  title = {{Experimental Study on High-Speed Milling Performance of 316 Stainless Steel}},
  booktitle = {Applied Mechanics and Materials},
  year = {2010},
  doi = {10.4028/www.scientific.net/amm.33.408},
}

Loading related content...

Figure