Experimental result and simulation analysis for the use of pixelated illumination from source mask optimization for 22nm logic lithography process
Lists
Only you see this
Abstract
We demonstrate experimentally for the first time the feasibility of applying SMO technology using pixelated illumination. Wafer images of SRAM contact holes were obtained to confirm the feasibility of using SMO for 22nm node lithography. There are still challenges in other areas of SMO integration such as mask build, mask inspection and repair, process modeling, full chip design issues and pixelated illumination, which is the emphasis in this paper. In this first attempt we successfully designed a manufacturable pixelated source and had it fabricated and installed in an exposure tool. The printing result is satisfactory, although there are still some deviations of the wafer image from simulation prediction. Further experiment and modeling of the impact of errors in source design and manufacturing will proceed in more detail. We believe that by tightening all kind of specification and optimizing all procedures will make pixelated illumination a viable technology for 22nm or beyond. <i>Publisher's Note: The author listing for this paper has been updated to include Carsten Russ. The PDF has been updated to reflect this change.</i>
BibTeX
@inproceedings{lai2009experimental,
author = {Kafai Lai and Alan E. Rosenbluth and Saeed Bagheri and John A. Hoffnagle and Kehan Tian and David Melville and Jaione Tirapu-Azpiroz and Moutaz Fakhry and Young Kim and Scott Halle and Greg McIntyre and Alfred Wagner and Geoffrey W. Burr and Martin Burkhardt and Daniel Corliss and Emily Gallagher and Tom Faure and M. Hibbs and Donis G. Flagello and J. Zimmermann and Bernhard Kneer and Frank Rohmund and Frank Hartung and Christoph Hennerkes and Manfred Maul and Robert Kazinczi and André Engelen and Rene Carpaij and Remco Groenendijk and Joost Hageman and Carsten Russ},
title = {{Experimental result and simulation analysis for the use of pixelated illumination from source mask optimization for 22nm logic lithography process}},
booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
year = {2009},
doi = {10.1117/12.814680},
}Loading related content...