Abstract
A novel method of pre-compensating phase distortions outside a fiber laser array using active integrated wavefront sensing is proposed and experimentally demonstrated. Using a 7-element adaptive fiber optics collimator (AFOC) array with a fill factor of 0.875, researchers successfully sensed and corrected lower-order aberrations from a glass plate. The experiment reduced the residual wavefront error from an initial 0.62 μm RMS to 0.11 μm RMS, resulting in a 3.5-fold improvement in far-field power-in-the-bucket (PIB). This approach bypasses traditional latency limits and array scale constraints, offering a scalable solution for free-space laser communication and directed energy systems.
Introduction: Overcoming the Latency Bottleneck
In high-power laser applications such as free-space communication and directed energy, atmospheric turbulence is a significant obstacle. Turbulence introduces phase distortions, or aberrations, that cause laser beams to spread and shimmer, drastically reducing the intensity at the target. While Coherent Beam Combining (CBC) allows multiple fiber lasers to act as a single high-power source, correcting for external atmospheric noise remains a challenge.
Traditional methods like Target-In-the-Loop (TIL) rely on measuring light reflected from a distant target. However, the finite speed of light introduces a round-trip delay—latency—that prevents real-time correction of rapidly changing turbulence. Furthermore, TIL systems become increasingly complex and slow as the number of laser elements in the array grows, leading to performance bottlenecks.
Methods: Active Integrated Wavefront Sensing
The researchers propose a shift from reactive correction to active pre-compensation. This scheme eliminates the need for a distant reflection by using a local laser beacon at the transmitter to sense turbulence.
The core of this system is a 7-element Adaptive Fiber Optics Collimator (AFOC) array. The array itself acts as a wavefront sensor; by measuring how the incoming beacon light couples into each fiber, the system can calculate the local slope of the distorted wavefront. These slopes are then reconstructed into Zernike polynomials to describe the overall shape of the aberration. A Stochastic Parallel Gradient Descent (SPGD) algorithm, operating at 500 Hz, is used to iteratively adjust homemade piezoelectric phase compensators (PMs), ensuring all beams are synchronized and pre-distorted to cancel out the external turbulence.
Experimental Results and Performance
To test the system, the researchers used a glass plate to simulate low-order atmospheric aberrations with an initial error of 0.62 μm RMS. The active sensing loop successfully reduced this error to 0.11 μm RMS, achieving the high-quality wavefront standard of approximately $\lambda/10$.
The most significant result was the improvement in Power-in-the-Bucket (PIB), which increased by 3.5 times after correction. This indicates that the energy concentration at the far-field target was substantially enhanced, matching the theoretical ideal for a 7-element hexagonal array. The experimental results confirm that the system can successfully decouple and correct both internal fiber noise and external atmospheric aberrations.
Conclusion and Future Outlook
This demonstration proves that distributed fiber arrays can serve as their own wavefront sensors, bypassing the latency issues of traditional adaptive optics. While this experiment focused on low-order aberrations with a 7-element array, the method is theoretically scalable to larger arrays and more complex turbulence. Future work will focus on increasing the element count to handle higher-order aberrations and testing the system against dynamic, high-speed atmospheric conditions. This technology holds great promise for enhancing the efficiency of long-range laser transmission systems in free space.
Summary updated