Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC

Hua Yang, Zhenduo Zhang, Jiyu Du, Xiaoliang Liang, Wei Zhang, Yukui Cai, Quanjing WangMicromachines 2024 · DOI

TL;DR

This paper introduces a novel multi-physics model that accurately predicts the intricate surface morphology created when ablating silicon carbide (SiC) with femtosecond lasers. By incorporating the dynamic changes in carrier density during the ablation process, the model significantly improves prediction accuracy, offering a powerful tool for controlling SiC micro-machining for advanced applications.

What Problem Does This Paper Address?

Silicon carbide (SiC) is a highly desirable material for demanding applications in automotive, semiconductor, and aerospace industries due to its exceptional properties like a wide bandgap and thermal conductivity. However, its inherent hardness and brittleness make traditional machining methods problematic, often leading to surface microcracks, poor precision, and tool wear. Femtosecond laser processing offers a promising alternative for high-precision machining, but precisely controlling the resulting surface morphology has been a challenge. Existing models often overlook the crucial role of carrier density fluctuations during laser-material interaction, which significantly influence temperature distribution and ultimately the ablated features. This paper aims to bridge this gap by developing a more comprehensive model that accounts for these carrier density dynamics.

Methods

The core of this research is a multi-physics model that integrates several physical phenomena. It builds upon the two-temperature model (TTM), which describes the energy transfer between electrons and the lattice after laser irradiation. What's novel here is the explicit inclusion of carrier density alterations. The model accounts for:

  • Nonlinear optical absorption: How the laser light is absorbed by the SiC, considering single, two-, and three-photon absorption processes.
  • Carrier generation and recombination: The dynamic creation and annihilation of free carriers within the SiC, driven by laser intensity and temperature.
  • Energy transfer: The flow of energy from the excited electrons to the lattice.
  • Thermal transport: How heat diffuses through the material.

The model uses COMSOL Multiphysics to solve the governing differential equations for electron and lattice temperatures, as well as carrier density. Experimental validation was performed using a femtosecond laser system to ablate 4H-SiC samples. Surface morphology was analyzed using Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM), with elemental analysis performed by Energy Dispersive Spectroscopy (EDS).

Datasets

The study did not introduce new benchmark datasets. Instead, it utilized experimental data generated from ablating 4H-SiC samples under controlled femtosecond laser parameters. These experimental results served as the ground truth for validating the developed simulation model.

Key Insights and Ideas

  • Carrier Density is King (for prediction): The most significant insight is that accurately predicting SiC ablation morphology requires accounting for the dynamic changes in carrier density. Ignoring this leads to substantial prediction errors, especially in ablation depth.
  • Beyond Simple Heat Transfer: The research highlights that femtosecond laser ablation is not just a simple heat transfer problem. The rapid ionization and subsequent carrier dynamics create complex, transient phenomena that dictate the final surface features.
  • Morphology is Controllable: The study demonstrates that by carefully selecting laser parameters (power, pulse width, spot diameter), the resulting ablation morphology can be precisely controlled. This opens doors for tailored surface engineering.
  • Oxidation is a Concern: The EDS analysis revealed surface oxidation, particularly in the heat-affected zone, which can impact device performance. This underscores the need for controlled processing environments (e.g., inert gas shielding).

Key Results

The developed multi-physics model, incorporating carrier density alterations, demonstrated excellent predictive capabilities:

  • Ablation Diameter Prediction Error: Within a range of 0.15% to 7.44% across various laser powers.
  • Ablation Depth Prediction Error: Within a range of 1.72% to 6.94% across various laser powers.
  • Comparison with Models Ignoring Carrier Density: Models that did not consider carrier density alterations showed significantly higher prediction errors, with maximum errors reaching 46.30% for diameter and 73.54% for depth.
  • Laser Power Influence: Increased laser power generally led to larger ablation diameters and depths, though not always in a strictly linear fashion.
  • Pulse Width and Spot Diameter Influence: Shorter pulse widths and larger spot diameters generally led to increased ablation diameter and depth, with spot diameter having a less pronounced effect on depth.

Limitations and Future Work

The authors acknowledge a few limitations:

  • Hydrodynamic Processes: The model's prediction of ablation depth was sometimes less accurate than for diameter, potentially due to the simplified treatment of hydrodynamic processes, such as the diffusion of molten materials.
  • Saturation Depth: The model did not explicitly consider the saturation depth of single-pulse femtosecond laser ablation, which can affect depth prediction accuracy.

Future work could focus on:

  • Incorporating Hydrodynamics: Enhancing the model to better capture the behavior of molten material.
  • Advanced Material Removal Mechanisms: Further exploring and integrating more complex material removal mechanisms.
  • Exploring Other Materials: Extending the model to predict ablation morphology for other brittle materials.
  • Real-time Control: Developing real-time feedback mechanisms for precise morphology control during processing.

Summary updated

Abstract

Silicon carbide (SiC) is utilized in the automotive, semiconductor, and aerospace industries because of its desirable characteristics. Nevertheless, the traditional machining method induces surface microcracks, low geometrical precision, and severe tool wear due to the intrinsic high brittleness and hardness of SiC. Femtosecond laser processing as a high-precision machining method offers a new approach to SiC processing. However, during the process of femtosecond laser ablation, temperature redistribution and changes in geometrical morphology features are caused by alterations in carrier density. Therefore, the current study presented a multi-physics model that took carrier density alterations into account to more accurately predict the geometrical morphology for femtosecond laser ablating SiC. The transient nonlinear evolutions of the optical and physical characteristics of SiC irradiated by femtosecond laser were analyzed and the influence of laser parameters on the ablation morphology was studied. The femtosecond laser ablation experiments were performed, and the ablated surfaces were subsequently analyzed. The experimental results demonstrate that the proposed model can effectively predict the geometrical morphology. The predicted error of the ablation diameter is within the range from 0.15% to 7.44%. The predicted error of the ablation depth is within the range from 1.72% to 6.94%. This work can offer a new way to control the desired geometrical morphology of SiC in the automotive, semiconductor, and aerospace industries.
BibTeX
@inproceedings{yang2024experimental,
  author = {Hua Yang and Zhenduo Zhang and Jiyu Du and Xiaoliang Liang and Wei Zhang and Yukui Cai and Quanjing Wang},
  title = {{Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC}},
  booktitle = {Micromachines},
  year = {2024},
  doi = {10.3390/mi15050573},
}
Figure