Abstract
Post-harvest grain loss remains a significant challenge for Indian agriculture. This study evaluates the grain storage methods adopted by 120 farmers in the Bihta block of Bihar during 2013-2014. The research compares traditional and improved storage techniques, analyzing their cost-effectiveness and efficiency in preventing grain loss. Results indicate that while Pucca koti is the most preferred method, metal bins offer the lowest grain loss (5.98%) and the most economical storage cost (Rs. 11/quintal/year). Socio-economic factors, particularly social participation and media exposure, were found to significantly influence farmers' knowledge of scientific storage practices.
Introduction
India has seen a dramatic increase in food grain production, rising from 51 million tonnes in 1951 to over 250 million tonnes in recent years. However, this success is tempered by a staggering post-harvest crisis. Approximately 10% to 20% of food grains—roughly 21–22 million tonnes—are lost annually before reaching consumers. These losses, valued at 33–35 thousand crore rupees, are driven by biotic factors such as rodents and insects, and abiotic factors like moisture and inadequate storage infrastructure. This study investigates the gap between available storage technologies and actual farmer adoption in rural Bihar.
Methods
The field study was conducted in the Bihta block of Patna, Bihar, involving a sample of 120 farmers. The participants were categorized into two groups: 60 who adopted "improved" storage methods and 60 who utilized "traditional" methods. Data were collected through personal interviews using a pre-tested schedule. Statistical analysis, including Chi-square ($\chi^2$) tests, was employed to identify correlations between socio-economic variables (age, education, income, social participation) and the farmers' knowledge levels regarding scientific storage.
Results and Discussion
The study revealed a diverse range of storage practices across different crop types. Farmers utilized structures ranging from traditional earthen pots to modern metal bins.
Efficiency and Cost-Effectiveness
Metal bins emerged as the most efficient storage solution, recording the minimum grain loss at 5.98%. They were also the most cost-effective, with an annual storage cost of Rs. 11 per quintal. In contrast, gunny bags, though widely used for maize and mustard, resulted in higher losses and nearly double the storage cost (Rs. 21 per quintal). The highest perceived loss (20.90%) occurred when using fertilizer bags for paddy storage, highlighting the risks of improper container reuse.
Socio-Economic Drivers of Knowledge
The research found that formal education alone was not the primary driver of knowledge regarding scientific storage. Instead, Social Participation ($\chi^2 = 9.24$) and Mass Media Exposure ($\chi^2 = 7.226$) showed the strongest associations with high knowledge levels. This suggests that community-based learning and access to information through media are critical for the adoption of improved agricultural technologies.
Pre-Storage and Transportation Vulnerabilities
Farmers reported that significant losses occur even before storage, during the drying and cleaning phases. Furthermore, the mode of transportation played a vital role; manual transport resulted in higher grain loss compared to the use of bullock carts or tractors.
Conclusion
To mitigate post-harvest losses and enhance national food security, a multi-pronged approach is required. The study recommends:
- Subsidizing Metal Bins: Given their superior protection and low long-term cost, making metal bins accessible to small-scale farmers is essential.
- Infrastructure Support: Providing concrete threshing yards can significantly reduce pre-storage losses during drying.
- Targeted Extension Services: Leveraging social networks and mass media to disseminate scientific storage practices, as these channels are more effective than formal education in reaching the farming community.
Summary updated