Evaluation of measurement accuracy of $h \to τ^+ τ^-$ branching ratio at the ILC with $\sqrt{s} = 250$ GeV and 500 GeV

Shin-Ichi Kawada, H. Fujii, Taikan Suehara, Tohru Takahashi, T. TanabearXiv 2013 · DOI · arXiv

Abstract

We evaluate the measurement accuracy of the branching ratio of $h \to \tau^+ \tau^-$ at $\sqrt{s} = 250$ GeV and 500 GeV at the ILC with the ILD detector simulation. For $\sqrt{s} = 250$ GeV, we assume a Higgs mass of $M_h = 120$ GeV, branching ratio $\text{Br}(h \to \tau^+ \tau^-) = 8.0\%$, beam polarization $P(e^-, e^+) = (-0.8, +0.3)$, and integrated luminosity $\int L \, dt = 250 \text{ fb}^{-1}$. The Higgs-strahlung process $e^+ e^- \to Zh$ with $Z \to e^+ e^-$, $Z \to \mu^+ \mu^-$, and $Z \to q\bar{q}$ modes are analyzed. The measurement accuracy is calculated to be $\Delta(\sigma\cdot \text{Br}) / (\sigma\cdot \text{Br}) = 3.5\%$. The scaled result to $M_h = 125$ GeV is estimated to be $4.2\%$. For $\sqrt{s} = 500$ GeV, assuming $M_h = 125$ GeV and $\int L \, dt = 500 \text{ fb}^{-1}$, the accuracy is $5.7\%$ for Higgs-strahlung with $Z \to q\bar{q}$ and $7.5\%$ for $WW$-fusion.

Introduction

In the Standard Model (SM), the Higgs boson's interaction strength with fermions (Yukawa coupling) is strictly proportional to the particle's mass. The decay $h \to \tau^+ \tau^-$ is the most accessible channel to study these couplings for matter particles. Deviations from SM predictions, often at the level of a few percent, could signal "New Physics" such as Supersymmetry or composite Higgs models. This study evaluates the precision of the International Linear Collider (ILC) in detecting these subtle fingerprints using full detector simulations.

Methodology

The analysis utilizes a full detector simulation framework to provide realistic precision estimates. The Mokka tool (Geant4-based) was used to simulate the International Large Detector (ILD).

Signal Processes and Reconstruction

Two primary Higgs production mechanisms were investigated:

  1. Higgs-strahlung ($e^+e^- \to Zh$): Analyzed with $Z$ decays into electrons, muons, or quarks ($q\bar{q}$).
  2. $WW$-fusion ($e^+e^- \to \nu\bar{ u}h$): The dominant process at higher center-of-mass energies (500 GeV).
Feynman diagram for the Higgs-strahlung process with hadronic Z decay, which provides the highest statistical sensitivity at 250 GeV.

Tau reconstruction is challenging due to invisible neutrinos in the final state. The researchers employed a "tau finder" algorithm and a collinear approximation, assuming neutrinos travel in the same direction as visible decay products. This allows for Higgs mass reconstruction despite missing energy. Additionally, a cone-based recovery method captured bremsstrahlung photons to sharpen the $Z$ boson mass peak.

Datasets and Parameters

The study used large-scale datasets generated for the ILC Technical Design Report, including signal and comprehensive Standard Model backgrounds (e.g., $W^+W^-$, $ZZ$, and $\gamma\gamma \to$ hadron overlay events). The assumed integrated luminosities were 250 fb⁻¹ at 250 GeV and 500 fb⁻¹ at 500 GeV, with beam polarizations of $P(e^-, e^+) = (-0.8, +0.3)$.

Key Results and Insights

The Sensitivity of Hadronic Channels

While leptonic $Z$ decays offer clean signals, the $Z \to q\bar{q}$ channel is the most sensitive at 250 GeV due to its significantly higher branching ratio. This channel alone drives the combined precision to 3.5% for $M_h = 120$ GeV.

Summary of Measurement Accuracy

The calculated accuracies for $\Delta(\sigma \cdot Br) / (\sigma \cdot Br)$ are summarized below:

Energy ($\sqrt{s}$) Higgs Mass ($M_h$) Channel Accuracy
250 GeV 120 GeV Combined ($Zh$) 3.5%
250 GeV 125 GeV Combined (Scaled) 4.2%
500 GeV 125 GeV $Zh$ ($Z \to q\bar{q}$) 5.7%
500 GeV 125 GeV $WW$-fusion 7.5%
Feynman diagrams for WW-fusion (left) and ZZ-fusion (right) Higgs production processes relevant for higher energy runs.

Discussion and Future Work

Scaling the results to the observed Higgs mass of ~125 GeV slightly reduces precision to 4.2% at 250 GeV. At 500 GeV, the $WW$-fusion channel remains complex and requires further refinement in tau identification and background rejection, particularly for $\gamma\gamma \to$ hadron noise. Future evaluations will also need to account for potential updates in the final ILC beam polarization design.

Summary updated

Abstract

We evaluate the measurement accuracy of the branching ratio of $h \to τ^+ τ^-$ at $\sqrt{s} = 250$ GeV and 500 GeV at the ILC with the ILD detector simulation. For the $\sqrt{s} = 250$ GeV, we assume the Higgs mass of $M_h = 120$ GeV, branching ratio of $\mathrm{Br}(h \to τ^+ τ^-) = 8.0 \ %$, beam polarization of $P(e^-, e^+) = (-0.8, +0.3)$, and integrated luminosity of $\int L \ dt = 250 \ \mathrm{fb ^{-1}}$. The Higgs-strahlung process $e^+ e^- \to Zh$ with $Z \to e^+ e^-$, $Z \to μ^+ μ^-$, $Z \to q\bar{q}$ mode are analyzed. The measurement accuracy is calculated to be $Δ(σ\cdot \mathrm{Br}) / (σ\cdot \mathrm{Br}) = 3.5 \ %$. The scaled result to $M_h = 125$ GeV is estimated to be $4.2 \ %$. For the $\sqrt{s} = 500$ GeV, we assume the Higgs mass of $M_h = 125$ GeV, branching ratio of $\mathrm{Br}(h \to τ^+ τ^-) = 6.32 \ %$, beam polarization of $P(e^-, e^+) = (-0.8, +0.3)$, and integrated luminosity of $\int L \ dt = 500 \ \mathrm{fb ^{-1}}$. The Higgs-strahlung process $e^+ e^- \to Zh$ with $Z \to q\bar{q}$ mode and $WW$-fusion process $e^+ e^- \to ν_e \bar{ν_e} h$ are analyzed. The measurement accuracy is calculated to be $Δ(σ\cdot \mathrm{Br}) / (σ\cdot \mathrm{Br}) = 5.7 \ %$ for Higgs-strahlung with $Z \to q\bar{q}$ and $7.5 \ %$ for $WW$-fusion.
BibTeX
@misc{kawada2013evaluation,
  author = {Shin-Ichi Kawada and H. Fujii and Taikan Suehara and Tohru Takahashi and T. Tanabe},
  title = {{Evaluation of measurement accuracy of $h \textbackslash\{\}to τ^+ τ^-$ branching ratio at the ILC with $\textbackslash\{\}sqrt\{s\} = 250$ GeV and 500 GeV}},
  year = {2013},
  eprint = {1308.5489},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1308.5489},
}
Figure