Evaluating efficiency of multi-layer switching in future optical transport networks

Soumya Roy, Anuj Malik, Abhijeet Deore, Satyajeet Ahuja, Onur Turkcu, Steve Hand, Serge MelleOfc/nfoec 2013 · DOI

TL;DR

This paper proposes a multi-layer switching architecture for optical transport networks that combines digital and optical switching to improve efficiency. By integrating sub-wavelength digital grooming with flexible optical switching, it demonstrates significant cost savings and increased capacity utilization compared to purely optical or digital approaches, especially with the advent of super-channels.

What Problem Does This Paper Address?

The demand for network bandwidth is exploding, driven by mobile, cloud, and video services. This puts immense pressure on optical transport networks to increase capacity, spectral efficiency, and reduce cost per bit. Next-generation networks need to handle line rates exceeding 100 Gb/s and leverage technologies like super-channels and flexible grid WDM. However, simply increasing line rates isn't enough; efficient management of traffic at the network node level is crucial. Traditional approaches like all-optical switching lack fine-grained grooming capabilities, leading to stranded capacity, while all-digital switching can be inefficient for high-capacity, fully-utilized wavelengths. The paper addresses the challenge of finding an optimal switching architecture that balances these trade-offs for future optical transport networks.

Methods

The authors evaluate three principal node switching architectures:

  • All-Digital Switching: Integrates DWDM line modules and digital switching, enabling sub-wavelength grooming at every node.
  • All-Optical Switching: Uses muxponders to map client services to wavelengths, with Wavelength Selective Switch (WSS) based optical switching. Grooming requires terminating the entire wavelength.
  • Multi-Layer Switching: A hybrid approach combining flexible ROADM layer with super-channel optical switching and ODU0 level OTN digital switching. This aims to leverage the benefits of both digital grooming for sub-wavelength traffic and optical express paths for super-channels.

They use a network model of a typical pan-European long-haul network with 58 nodes and 81 links, incorporating multiple fiber types and varying link lengths. Traffic is modeled based on industry projections, with service interfaces ranging from 1 Gb/s to 100 Gb/s. The study quantifies results by comparing the number of 100G ports required and the additional service-ready capacity provided by each architecture.

Datasets

Not discussed in the paper. The study uses a simulated network model based on a "typical pan-European long-haul network" and industry analyst projections for traffic demand.

Key Insights and Ideas

  • The Synergy of Hybrid Switching: The core idea is that combining digital and optical switching offers a superior solution. Digital grooming excels at efficiently packing smaller services into wavelengths, while optical switching provides efficient express paths for larger, pre-groomed traffic (like super-channels).
  • Super-Channels as a Game Changer: The paper highlights that as network demands grow and super-channels become prevalent, the multi-layer approach becomes even more advantageous. It allows for efficient packing of these larger units while still retaining the flexibility for sub-wavelength management when needed.
  • Cost Savings Through Efficiency: The primary driver for adopting multi-layer switching is the potential for significant cost reduction by minimizing the number of expensive 100G ports and optimizing capacity utilization.

Key Results

  • Reduced 100G Port Requirements: The multi-layer switching architecture requires 13-22% fewer 100G ports compared to both all-optical and all-digital switching architectures. This is attributed to its ability to efficiently groom traffic at the sub-wavelength level and express larger traffic units optically.
  • Enhanced Capacity Utilization with Super-Channels: When considering super-channels (e.g., 5x100G), the multi-layer approach provides 7-29% additional service-ready network capacity. This translates to greater flexibility for service providers to monetize capacity as needed without costly physical upgrades (truck-rolls).
  • Operational Efficiency: The multi-layer approach reduces the number of line cards required, leading to lower operational expenditures (OPEX) through reduced installation time, maintenance, and improved reliability.

Limitations and Future Work

  • Limitations: The paper focuses on a specific network model and traffic mix. The exact benefits might vary depending on the specific network topology, traffic patterns, and the granularity of digital switching implemented. The analysis of "cost savings" is primarily presented in terms of the number of 100G ports, with a qualitative discussion of OPEX benefits.
  • Future Work: The paper implicitly suggests that further optimization of the multi-layer switching architecture, particularly in how it integrates with evolving super-channel technologies and flexible grid WDM, will be crucial. Exploring more detailed cost models and a wider range of network scenarios would also be valuable.

Summary updated

BibTeX
@inproceedings{roy2013evaluating,
  author = {Soumya Roy and Anuj Malik and Abhijeet Deore and Satyajeet Ahuja and Onur Turkcu and Steve Hand and Serge Melle},
  title = {{Evaluating efficiency of multi-layer switching in future optical transport networks}},
  booktitle = {Ofc/nfoec},
  year = {2013},
  doi = {10.1364/nfoec.2013.nth4j.2},
}
Figure