EUV mask process development using DUV inspection system

David Kim, Venu Vellanki, William Y. C. Huang, Andrew Cao, Chunlin Chen, Aditya Dayal, Paul K. L. Yu, Ki Hun Park, Yumiko Maenaka, Kazuko Jochi, Gregg InderheesProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2007 · DOI

Abstract

As the design rule continues to shrink towards 3x nm and below, lithographers are searching for new and advanced methods of mask lithography such as immersion, double patterning and extreme ultraviolet lithography (EUVL). EUV lithography is one of the leading candidates for the next generation lithography technologies after 193 nm immersion and many mask makers and equipment makers have focused on stabilizing the process. With EUV lithography just around the corner, it is crucial for advanced mask makers to develop and stabilize EUV mask processes. As a result, an inspection tool is required to monitor and provide quick feedback to each process step.
BibTeX
@inproceedings{kim2007euv,
  author = {David Kim and Venu Vellanki and William Y. C. Huang and Andrew Cao and Chunlin Chen and Aditya Dayal and Paul K. L. Yu and Ki Hun Park and Yumiko Maenaka and Kazuko Jochi and Gregg Inderhees},
  title = {{EUV mask process development using DUV inspection system}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2007},
  doi = {10.1117/12.747163},
}

Loading related content...

Figure