Ethylene Vinyl Alcohol Copolymer Nanofibrous Cation Exchange Chromatographic Membranes with a Gradient Porous Structure for Lysozyme Separation

Tianzhi Tang, Jinping Gan, Zhanrui Cao, Pan Cheng, Qin Cheng, Tao Mei, Liping Zhu, Xuechang Zhou, Ke Liu, Dong WangPolymers 2024 · DOI

TL;DR

Researchers have developed novel nanofibrous membranes with a unique gradient porous structure for efficient lysozyme separation. These membranes, made from ethylene vinyl alcohol (EVOH) copolymer and modified with sulfonic acid groups, demonstrate significantly higher adsorption capacities and improved performance compared to traditional homogenous structures, paving the way for advanced chromatographic separation technologies.

What Problem Does This Paper Address?

Lysozyme, a valuable antimicrobial agent, is widely used across various industries, including food, pharmaceuticals, and medicine. However, its efficient and cost-effective isolation from complex mixtures remains a significant challenge. Traditional separation methods like column chromatography, while established, often suffer from limitations such as slow flow rates, low separation efficiency, and weak interactions with target molecules. Membrane chromatography offers a promising alternative due to its mild conditions, high efficiency, and simple operation. However, designing membrane materials with optimal pore structures and strong adsorption capabilities for specific biomolecules like lysozyme is an ongoing area of research. This paper aims to address this by developing a novel nanofibrous membrane with a specifically engineered gradient porous structure to enhance lysozyme adsorption and separation.

Methods

The core of this research involves the fabrication and functionalization of ethylene vinyl alcohol (EVOH) copolymer nanofibrous membranes. The process begins with preparing EVOH nanofibers using a melt extrusion phase separation method. These nanofibers are then assembled into membranes with either homogenous or gradient porous structures through a layer-by-layer wet-laying technique.

The key innovation lies in the subsequent modification of these membranes. A cost-efficient ultraviolet (UV)-assisted graft-modification method is employed. This involves using benzophenone as a photoinitiator and 2-acrylamide-2-methylpropanesulfonic acid (AMPS) as a modifying monomer. Under UV irradiation, benzophenone generates radicals that initiate the grafting of AMPS onto the EVOH nanofibers. This process introduces sulfonic acid groups (-SO₃H) onto the membrane surface, rendering it a cation exchanger capable of adsorbing positively charged molecules like lysozyme.

The researchers systematically prepared membranes with different porous structures (homogenous and gradient) and characterized their physicochemical properties using techniques such as Fourier Transform Infrared (FTIR) spectroscopy, X-ray Photoelectric Energy Spectrometer (XPS), scanning electron microscopy (SEM), and capillary flow porometry. Lysozyme adsorption performance was evaluated through static and dynamic adsorption tests, as well as recycling effectiveness studies.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel material and its performance evaluation using a model protein (lysozyme) in controlled experimental setups.

Key Insights and Ideas

  • Gradient Porous Structure is Key: The most significant insight is that a gradient porous structure, rather than simply high porosity or specific surface area, is the determining factor for superior lysozyme adsorption. This structure facilitates better mass transfer of the target molecule.
  • Hierarchical Pore Design: The gradient structure, achieved by layering nanofibers of different diameters (e.g., smaller inner pores and larger outer pores), enhances both convective transfer of the solution and efficient capture of lysozyme.
  • Functionalization for Specificity: The introduction of sulfonic acid groups via UV-assisted grafting effectively transforms the EVOH nanofibers into cation exchangers, enabling selective adsorption of positively charged lysozyme.
  • Robust Performance: The developed membranes exhibit high static and dynamic adsorption capacities and maintain this performance even after multiple adsorption-desorption cycles, indicating good stability and reusability.
  • Beyond Pore Size and Surface Area: The study challenges the conventional wisdom that solely maximizing pore size or specific surface area leads to optimal adsorption. It highlights the importance of the interplay of these parameters and the overall pore architecture.

Key Results

  • Static Adsorption Capacity: The gradient porous structure membrane (NS-200-750) achieved a significantly higher static adsorption capacity of 335 mg/g, compared to homogenous membranes like NS-750 (164.3 mg/g) and NS-200 (175.2 mg/g).
  • Dynamic Adsorption Capacity: The NS-200-750 membrane demonstrated a dynamic adsorption capacity of 216.3 mg/g, outperforming other tested columns.
  • Reusability: The membrane maintained high adsorption capacity and over 90% desorption efficiency after five adsorption-desorption cycles.
  • Improved Water Flux: The gradient structure (NS-200-750) showed a 26.7% higher water flux compared to NS-200, indicating improved convective transfer.
  • Surface Modification: FTIR and XPS confirmed the successful grafting of sulfonic acid groups onto the nanofiber surface.

Limitations and Future Work

  • Limitations: While the study demonstrates excellent performance, the authors acknowledge that the gradient porous structure is a complex interplay of factors. Further detailed investigation into the precise contribution of each structural parameter (porosity, pore size, specific surface area) and their synergistic effects would be beneficial. The study focused on lysozyme; extending this to other proteins or biomolecules would be valuable.
  • Future Work: The authors propose preparing nanofibrous chromatographic membranes with even more fiber layers and higher separation properties for future research. This suggests a direction towards developing more sophisticated, multi-layered gradient structures for enhanced performance and broader applicability in biomolecule separation.

Summary updated

Abstract

Lysozyme, a common antimicrobial agent, is widely used in the food, biopharmaceutical, chemical, and medicine fields. Rapid and effective isolation of lysozymes is an everlasting topic. In this work, ethylene vinyl alcohol (EVOH) copolymer nanofibrous membranes with a gradient porous structure used for lysozyme adsorption were prepared through layer-by-layer nanofiber wet-laying and a cost-efficient ultraviolet (UV)-assisted graft-modification method, where benzophenone was used as an initiator and 2-acrylamide-2-methylpropanesulfonic acid as a modifying monomer. As indicated in the Fourier Transform Infrared (FTIR) and X-ray photoelectric energy spectrometer (XPS) investigation, sulfonic acid groups were introduced on the surface of the modified nanofibrous membrane, which possessed the ability to adsorb lysozyme. Compared with membranes with homogenous porous structures, membranes with a gradient porous structure present higher static (335 mg/g) and dynamic adsorption capacities (216.3 mg/g). Meanwhile, the adsorption capacity remained high after five cycles of the adsorption-desorption process. The results can be attributed to the gradient porous structure rather than the highest porosity and specific surface area. This suggests that the membrane with comprehensive separation performance can be designed from the view of the transmembrane porous structure, which is of significance for the development of next-generation advanced chromatographic membranes.
BibTeX
@inproceedings{tang2024ethylene,
  author = {Tianzhi Tang and Jinping Gan and Zhanrui Cao and Pan Cheng and Qin Cheng and Tao Mei and Liping Zhu and Xuechang Zhou and Ke Liu and Dong Wang},
  title = {{Ethylene Vinyl Alcohol Copolymer Nanofibrous Cation Exchange Chromatographic Membranes with a Gradient Porous Structure for Lysozyme Separation}},
  booktitle = {Polymers},
  year = {2024},
  doi = {10.3390/polym16081112},
}
Figure