Estimating Public Transportation Accessibility in Metropolitan Areas: A Case Study and Comparative Analysis

Haitao Su, M. Li, Xiaofeng Zhong, Kai Zhang, Jingkai WangSustainability 2023 · DOI

TL;DR

This paper introduces an "improved PTAL" method for estimating public transportation accessibility in large cities, addressing limitations of the traditional London PTAL by incorporating user preferences and handling missing data. Applied to Shenzhen, the method demonstrates better discrimination in accessibility levels compared to the London PTAL, offering a more nuanced understanding for urban planning.

What Problem Does This Paper Address?

Urban areas worldwide face increasing traffic congestion, environmental pollution, and resource strain due to growing transportation demands and car ownership. Effective urban planning and development, particularly through Transit-Oriented Development (TOD), hinges on understanding and improving public transportation accessibility. While methods like the London PTAL exist, they often struggle with data availability (especially real-time timetables), don't account for varying user preferences across different transit modes, and may not be suitable for densely populated, large metropolitan areas with diverse development conditions. This paper aims to bridge this gap by proposing a more robust and adaptable PTAL estimation method.

Methods

The core of this research is the development of an "improved PTAL method." Key innovations include:

  • Incorporating Resident Preferences: Instead of treating all transit modes equally, the method assigns weights based on their attractiveness to residents, reflecting real-world usage patterns.
  • Addressing Missing Timetable Data: The method proposes a way to calculate transit schedules at intermediate stops even without complete GPS data, making it more practical for cities with data limitations.
  • Enhanced Calculation of Equivalent Frequency: The calculation of equivalent frequencies for bidirectional routes is improved by evaluating each direction separately, rather than just taking the higher frequency.
  • Grid-Based Analysis: The study uses a grid-based approach (150m x 150m) to represent the city and calculate accessibility indices for each grid point.
  • Classification Methods: The paper compares various classification methods (k-means clustering, standard deviation, quantile, equal spacing) to categorize the calculated accessibility indices, aiming to find the most suitable approach for large cities.

Datasets

The study utilizes actual data from Shenzhen, China, including:

  • Public Bus and Metro Station Location Data: Essential for defining service areas.
  • Bus Route Direction, Station, and Departure Interval Data: Used to calculate travel times and frequencies.
  • Metro Route Station and Departure Interval Data: Similar to bus data, used for metro accessibility calculations.
  • Pedestrian Walking Speed Data: Derived from studies in Shanghai and Beijing.
  • Amap Web API: Used to crawl walking information (distance and time) from grid points to transit stations.

Key Insights and Ideas

  • The "Optimal" Number of Clusters: For large cities, six clusters appear to be the optimal number for classifying public transportation accessibility using k-means clustering, balancing differentiation with manageability.
  • Quantile Method's Strength: Among statistical classification methods, the quantile method demonstrated superior performance in categorizing accessibility levels.
  • Improved PTAL's Discriminatory Power: The proposed "improved PTAL" method offers better discrimination in estimating public transportation accessibility levels compared to the traditional London PTAL, especially in complex urban environments.
  • Shenzhen vs. London: While Shenzhen has a smaller proportion of its total area covered by public transport (due to topography), its built-up areas show a higher concentration of high-accessibility regions compared to London, suggesting more advanced development in its core areas.
  • Data Availability is Key: The improved method's reduced reliance on real-time data makes it more applicable to cities with data acquisition challenges.

Key Results

  • The study calculated public transportation accessibility indices for nearly 100,000 grid points in Shenzhen.
  • The k-means clustering with six clusters was found to be suitable for Shenzhen's accessibility classification.
  • The improved PTAL method, when applied to Shenzhen, showed better differentiation of accessibility levels compared to the London PTAL method, particularly in identifying areas with higher accessibility.
  • The paper provides a framework and guidance for how cities with different characteristics can adapt and reference the improved PTAL method.

Limitations and Future Work

  • Grid Method Limitations: The use of a grid method might lead to differences from the actual distribution of travel points.
  • Same-Named Bus Stops: The study treated same-named bus stops as identical, potentially overlooking differences in walking times, especially along major roads.
  • Data Granularity: Future work could benefit from more granular data, such as individual building or community-level analysis, to improve realism.
  • Dynamic Accessibility: Expanding the study to incorporate real-time data (e.g., mobile signaling) would allow for dynamic accessibility analysis, moving beyond static estimations.
  • Integrating Other Data: Incorporating taxi GPS trajectory data and bicycle data could lead to a more comprehensive and reliable accessibility measurement model.
  • Future Infrastructure Impact: The proposed method can be extended to predict the impact of future transportation infrastructure on accessibility levels.

Summary updated

Abstract

Accessibility-oriented public transportation planning can improve the operational efficiency of public transportation, guide orderly urban development, and alleviate issues such as traffic congestion, environmental pollution, and resource consumption in large cities. To promote the practical application and widespread adoption of public transportation accessibility estimating systems, this study proposes an improved public transport accessibility levels (PTAL) method. It innovatively incorporates residents’ preference indices for different modes of transportation and addresses the challenge of missing timetable data in the calculation process. Using actual data from Shenzhen, a case study is conducted to analyze the public transportation accessibility index and compare the results obtained through k-means clustering, the equal spacing method, the quantile method, and the application of the London PTAL method. The research findings indicate that the optimal number of clusters for public transportation accessibility index analysis in large cities is six when using clustering algorithms. Among the statistical analysis methods, the quantile method shows favorable performance. Furthermore, a comprehensive comparison of different classification methods confirms that the improved PTAL method offers better discrimination in estimating public transportation accessibility levels compared to the London PTAL method. The study concludes by providing guidance on how cities with different characteristics can reference the improved PTAL method.
BibTeX
@inproceedings{su2023estimating,
  author = {Haitao Su and M. Li and Xiaofeng Zhong and Kai Zhang and Jingkai Wang},
  title = {{Estimating Public Transportation Accessibility in Metropolitan Areas: A Case Study and Comparative Analysis}},
  booktitle = {Sustainability},
  year = {2023},
  doi = {10.3390/su151712873},
}
Figure