Equilibrium Morphology of Face-Centered Cubic Gold Nanoparticles >3 nm and the Shape Changes Induced by Temperature

Amanda S. Barnard, Xiao‐Min Lin, Larry A. CurtissThe Journal of Physical Chemistry B 2005 · DOI

TL;DR

This paper uses first-principles calculations and a thermodynamic model to predict the equilibrium shape of gold nanoparticles larger than 3 nm, finding it to be a modified truncated octahedron. Crucially, it reveals that these nanoparticles undergo a significant shape change before melting, offering insights into their thermal behavior.

What Problem Does This Paper Address?

The properties of metallic nanoparticles are heavily influenced by their shape, which in turn is dictated by the crystallographic orientation of their surface facets. While the equilibrium shapes of very small gold clusters (<3 nm) are relatively well-understood (often favoring icosahedral or decahedral structures), the equilibrium morphology of larger gold nanoparticles (3-100 nm) has remained less clear. Furthermore, the behavior of these larger nanoparticles under thermal stress, particularly how their shape changes before melting, is not well-characterized. This paper aims to bridge this gap by investigating the equilibrium shape and temperature-induced morphological transformations of face-centered cubic (fcc) gold nanoparticles in the experimentally relevant size range of 3-100 nm.

Methods

The researchers employed a multi-scale thermodynamic model that incorporates surface energies and surface stresses calculated using first-principles scalar relativistic methods. Specifically, they used density functional theory (DFT) with the Perdew-Wang (PW91) generalized-gradient approximation, implemented within the Vienna ab initio Simulation Package (VASP). They calculated the surface free energies ($\gamma_{xi}$) and surface stresses ($\sigma_{xi}$) for the {111} and {100} surfaces of gold.

To determine the equilibrium morphology, they used a Wulff construction approach, but then further optimized the nanoparticle shape by defining it with two independent length parameters (A and B) and minimizing the total free energy. This optimization was performed as a function of particle size and temperature. For temperature dependence, they utilized semiempirical expressions for surface energy and surface stress, incorporating critical temperatures for surface deterioration.

Datasets

Not discussed in the paper. The study relies on ab initio calculations and a theoretical model, rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Modified Truncated Octahedron is the Equilibrium Shape: Contrary to intuitive expectations that the lowest surface energy {111} facets would lead to an octahedron, the study predicts a modified truncated octahedron as the most energetically favorable equilibrium shape for gold nanoparticles >3 nm. This highlights the complex interplay between surface energy, surface stress, and surface-to-volume ratio in determining nanoparticle morphology.
  • Size-Dependent Deviation from Wulff Construction: For smaller nanoparticles (<20 nm), the optimized shape deviates slightly from the macroscopic Wulff construction. This is attributed to the need for these small particles to minimize total surface stress and surface-to-volume ratio, even at the cost of slightly higher surface energy.
  • Pre-Melting Shape Transformation: A significant finding is that gold nanoparticles undergo a noticeable shape change before melting. This transformation involves an increase in the fraction of {100} surface area and a shift towards a more cuboctahedral-like morphology. This pre-melting behavior is size-dependent, with larger particles showing a more pronounced change.
  • Experimental Relevance of Shape Changes: The predicted shape changes are consistent with experimental observations of gold nanoparticles altering their morphology when exposed to electron beams during imaging or to optical irradiation. This suggests that observed non-equilibrium shapes in experiments might be due to thermal effects.

Key Results

  • The equilibrium shape of gold nanoparticles >3 nm is predicted to be a modified truncated octahedron.
  • For particles <20 nm, the optimized shape deviates from the Wulff construction, with a B/A ratio converging to ~0.160 (90.5% {111} surface area) at ~20 nm.
  • Temperature-induced shape transitions are predicted for nanoparticles in the 4-12 nm range. For example, a shape transition from a truncated octahedron to a more cuboctahedral-like morphology is observed before melting.
  • The onset of melting shifts to higher temperatures with increasing particle size.
  • The study estimates that gold nanoparticles observed in TEM images (with ~77% {111} surface area) might have been annealed to around 800 °C by the electron beam.

Limitations and Future Work

  • Size Limit of the Model: The model is stated to be valid for nanoparticles over ~3 nm in diameter, as edge and corner contributions are ignored below this size.
  • Experimental Validation: While the results are in good agreement with some experimental observations, direct experimental validation of the predicted equilibrium shape and the precise temperature-induced shape changes would be beneficial.
  • Ligand Effects: The study focuses on unsupported nanoparticles and does not explicitly account for the influence of ligands, which can significantly affect nanoparticle morphology and stability in experimental synthesis.
  • Future Work: The authors suggest that this work provides a foundation for understanding the thermal behavior of gold nanoparticles and could be extended to investigate other metallic nanoparticles. Further exploration of the interplay between size, temperature, and shape, particularly in the context of experimental synthesis and processing, is warranted. The predicted shape transition before melting could also be a precursor to the transition to an icosahedral shape in smaller gold nanoparticles.

Summary updated

Abstract

Many of the unique properties of metallic nanoparticles are determined not only by their finite size but also by their shape, defined by the crystallographic orientation of the surface facets. These surfaces (and therefore the nanoparticles themselves) may differ in a number of ways, including surface atom densities, electronic structure, bonding, chemical reactivities, and thermodynamic properties. In the case of gold, it is known that the melting temperature of nanoparticles strongly depends on the crystal size and that the shape may alter considerably (and yet somewhat unpredictably) during annealing. In this work we use first principle calculations and a thermodynamic model to investigate the morphology of gold nanoparticles in the range 3-100 nm. The results predict that the equilibrium shape of gold nanoparticles is a modified truncated octahedron and that the (size-dependent) melting of such particles is preceded by a significant change in the nanoparticle's morphology.
BibTeX
@article{barnard2005equilibrium,
  author = {Amanda S. Barnard and Xiao‐Min Lin and Larry A. Curtiss},
  title = {{Equilibrium Morphology of Face-Centered Cubic Gold Nanoparticles \&gt;3 nm and the Shape Changes Induced by Temperature}},
  journal = {The Journal of Physical Chemistry B},
  year = {2005},
  doi = {10.1021/jp054279n},
}
Figure