Equilateral Triangular Dielectric Resonator and Metal Patch Hybrid Antenna for UWB Application

Zhiwei Song, Hongxing Zheng, Mengjun Wang, Yan Li, Tao Song, Erping Li, Yongjian LiIEEE Access 2019 · OpenReview

Introduction

Ultra-wideband (UWB) communication systems require antennas that maintain stable radiation patterns and high efficiency across a broad frequency spectrum (typically 3.1 to 10.6 GHz). While planar monopole antennas are common due to their low profile, they often suffer from high cross-polarization at higher frequencies, which leads to wasted energy. Dielectric Resonator Antennas (DRAs) offer a high-performance alternative with lower conduction losses, but they are traditionally bulky and difficult to integrate into slim modern electronics.

This paper presents a novel hybrid antenna that integrates an equilateral triangular dielectric resonator (DR) with a metal patch monopole. By embedding the resonator into the substrate, the researchers achieved a low-profile, high-performance UWB solution that maintains the benefits of a DRA within a form factor of just 1.524 mm.

Antenna Design and Methodology

The proposed design utilizes a hybrid discrete embedded approach. The structure consists of a rectangular metal patch monopole stacked with laminated equilateral triangular DRs. The triangular shape was specifically chosen as it offers a smaller volume than rectangular or cylindrical resonators at the same frequency. A key innovation is the embedding of one DR layer into the dielectric substrate, which significantly reduces the overall height.

Detailed geometry and labels of the proposed hybrid antenna, showing the front (a), side (b), and perspective (c) views.

The antenna is fed by a Coplanar Waveguide (CPW), facilitating easy integration with other integrated circuits. To further optimize bandwidth and impedance matching, the design incorporates a Defected Ground Structure (DGS)—specific cuts in the ground plane that help broaden the operating band. Mode analysis was used to identify that the antenna operates under $TE^x_{\delta mn}$ modes, allowing for mathematical prediction and optimization of the design parameters.

Performance and Results

The UWB characteristic of this antenna is not the result of a single resonance but rather the synergy between the metal patch, the triangular DR, and the DGS. These components interact to generate three primary working frequencies, providing consistent coverage across the entire FCC-allocated UWB band.

Simulated return loss ($S_{11}$) and input impedance, illustrating the contribution of the DR and DGS to the wideband performance.

As shown in the performance data, the antenna achieved several key benchmarks:

  • Ultra-Wide Bandwidth: A measured impedance bandwidth of 112% (3.2 GHz to 11.35 GHz).
  • High Efficiency: Radiation efficiency remained above 93% across the entire operating band, outperforming many purely metallic designs.
  • Stable Gain: The gain remained consistent, staying above 2.0 dBi for more than half of the working frequency range.
  • Low Cross-Polarization: The symmetry of the DR and monopole structure causes surface currents in certain modes to be opposite in phase, effectively cancelling out unwanted cross-polarization.

Conclusion

The hybrid triangular DR and metal patch antenna successfully addresses the traditional trade-off between profile height and UWB performance. By employing a discrete embedding technique and a defected ground structure, the design achieves a profile of approximately 1.5 mm while maintaining high efficiency and stable omnidirectivity. While the embedded nature of the DR requires precise manufacturing, the antenna's compact dimensions (17.6 mm × 33.6 mm) and robust performance make it an ideal candidate for integration into modern, slim-profile wireless consumer electronics.

Summary updated

Abstract

This paper postulates a novel omnidirectional low-profile ultra-wideband (UWB) antenna, which is structured by discrete embedded dielectric resonator antenna with features of both low-profile dielectric resonator (DR) and thin planar monopole antenna, where the laminated equilateral triangular DR and the rectangular metal patch monopole are stacked up. This new design can lower the profile of the antenna. Furthermore, the symmetric DR and the monopole structure are able to make the surface currents in some operating modes opposite in phase, together with the characteristics of the coplanar waveguide (CPW) feed structure and the DR, the cross-polarization is reduced effectively. The mode analysis has been done to show how the antenna achieves the UWB. The CPW which can integrate with integrated circuits easily is used to provide the excitation source. The antenna provides consistent omnidirectivity, consistent gain, low cross-polarization, and high-radiation efficiency within the entire operation band. A prototype (dimensions are 17.6 mm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times33.6$ </tex-math></inline-formula> mm and 1.524 mm thickness) is fabricated and measured. The measurements are well correlated with the simulations.
BibTeX
@inproceedings{song2019equilateral,
  author = {Zhiwei Song and Hongxing Zheng and Mengjun Wang and Yan Li and Tao Song and Erping Li and Yongjian Li},
  title = {{Equilateral Triangular Dielectric Resonator and Metal Patch Hybrid Antenna for UWB Application}},
  booktitle = {IEEE Access},
  year = {2019},
  url = {https://openreview.net/forum?id=jgUn-O-L-1},
}
Figure