Environmental impact assessment of battery boxes based on lightweight material substitution

Xinyu Li, Yuanhao Zhang, Yumin Liao, Guanghai YuScientific 2024 · DOI

TL;DR

This study performs a "cradle-to-cradle" Life Cycle Assessment (LCA) to determine if lightweighting electric vehicle (EV) battery boxes actually helps the environment. While carbon fiber composites offer the most weight savings, aluminum alloy emerges as the overall winner, reducing greenhouse gas emissions by 44.4% over its lifecycle compared to traditional steel, largely due to its mature recycling ecosystem.

What Problem Does This Paper Address?

While EVs are celebrated for zero tailpipe emissions, their "cradle-to-gate" production phase remains carbon-heavy, with battery systems being a primary culprit. The battery enclosure alone can account for 30% to 63% of the total battery pack's production emissions.

Engineers often turn to lightweight materials like aluminum or carbon fiber to extend vehicle range and reduce energy consumption during the "use phase." However, these materials are often more energy-intensive to produce than steel. The authors address a critical question: Does the energy saved during the driving life of the vehicle actually offset the higher environmental cost of manufacturing and disposing of these advanced materials?

Methods

The researchers conducted a comparative LCA using GaBi software and the CML2001 impact assessment method. They compared three materials for a battery box of specific dimensions (1400 mm × 1200 mm × 200 mm):

  1. Steel (Q235/Q345): The baseline/control.
  2. Aluminum Alloy (6061): A common lightweight alternative.
  3. Carbon Fiber Sheet Molding Compound (CF-SMC): A high-performance composite.

To ensure a fair comparison, they used the principle of stiffness equivalence—meaning each box was designed to have the same structural rigidity, resulting in different masses (Steel: 97.22 kg, Aluminum: 49.61 kg, CF-SMC: 34.56 kg). The study covered the entire lifecycle: material acquisition, manufacturing (including often-overlooked coating processes), a 600,000 km use phase, and recycling.

Datasets

  • Primary Data: Sourced from "grey literature," specifically environmental impact assessment reports from representative manufacturers in China.
  • Secondary Data: The GaBi database was used for upstream processes like electricity generation (China Mix), welding materials, and compressed air.
  • Specific Material Data: Included data for AL6061 (Guangzhou), Q235 (Anhui), and CF-SMC (HEXCEL).

Key Insights and Ideas

  • The Production Penalty: Lightweight materials are "dirtier" to make. Aluminum production emissions are 90% higher than steel, and CF-SMC emissions are nearly triple.
  • Recycling is the Tie-Breaker: Aluminum’s environmental "win" is secured by its high recycling rate (92%) and mature remelting process. In contrast, CF-SMC is a thermosetting composite, making it difficult to recycle without losing mechanical properties, which limits its "cradle-to-cradle" benefits.
  • Weight Isn't Everything: CF-SMC is the lightest material, but it only becomes the environmentally optimal choice if the vehicle's cumulative mileage exceeds ~668,000 km—well beyond the typical lifespan of most consumer EVs.
  • Grid Sensitivity: As the power grid becomes "greener" (projected 2050 scenario), the environmental impact of all materials drops significantly. Interestingly, CF-SMC sees the largest relative reduction in impact under a green grid because its manufacturing is so electricity-intensive.

Key Results

The study evaluated four categories: Global Warming Potential (GWP), Acidification Potential (AP), Abiotic Depletion Potential (ADP), and Human Toxicity Potential (HTP).

  • GWP Reduction: Replacing steel with aluminum alloy reduces lifecycle CO2-equivalent emissions by 44.4%. CF-SMC reduces them by 34.6%.
  • Substitution Factor: The authors introduced a "substitution factor" to quantify the benefit. Aluminum alloy has a factor of 1.55 tC sb⁻¹, meaning every aluminum box substituted for a steel one avoids 1.55 tons of CO2 emissions.
  • The Break-Even Point: Steel is only environmentally superior for very short-range vehicles (total lifetime mileage < 41,040 km).
  • Aluminum's Dominance: Aluminum outperformed both steel and CF-SMC across all four environmental impact categories when the full lifecycle was considered.

Limitations and Future Work

  • Simplified Use Phase: The study assumed a constant battery conversion efficiency. In reality, efficiency declines as the battery ages and mileage increases.
  • System Boundaries: The model excluded transportation, distribution, and the environmental impact of charging infrastructure (roads, stations).
  • Recycling Maturity: The results for CF-SMC are hampered by the current lack of large-scale commercial recycling for composites. If chemical or thermal recycling for carbon fiber becomes more efficient and widespread, the "cradle-to-cradle" math for composites could change.
  • Future Direction: The authors suggest incorporating varied conversion efficiencies and more localized Chinese background data to refine the model.

Summary updated

Abstract

Power battery is one of the core components of electric vehicles (EVs) and a major contributor to the environmental impact of EVs, and reducing their environmental emissions can help enhance the sustainability of electric vehicles. Based on the principle of stiffness equivalence, the steel case of the power cell is replaced with lightweight materials, a life cycle model is established with the help of GaBi software, and its environmental impact is evaluated using the CML2001 method. The results can be summarized as follows: (1) Based on the four environmental impact categories of GWP, AP, ADP (f), and HTP, which are the global warming potential (GWP), acidification potential (AP), abiotic depletion potential (ADP (f)) and human toxicity potential (HTP), the environmental impact of lightweight materials is lower than that of the steel box. Among them, the aluminum alloy box has the largest reduction, and the Carbon Fiber Sheet Molding Compound (CF-SMC) box is the second. (2) In the sensitivity analysis of electric structure, an aluminum alloy box is still the most preferable choice for environmental impact. (3) In the sensitivity analysis of driving mileage, the aluminum alloy box body is also the best choice for vehicle life. (4) Quantitative assessment using substitution factors measures the decrease in greenhouse gas emissions following the substitution of steel battery box with lightweight materials. The adoption of aluminum alloy battery box can lead to a reduction of 1.55 tons of greenhouse gas emissions, with a substitution factor of 1.55 tC sb<sup>-1</sup>. In the case that composite materials have not been recycled commercially on a large scale, aluminum alloy is still one of the best materials for the integrated environmental impact of the whole life cycle of the battery boxes.
BibTeX
@inproceedings{li2024environmental,
  author = {Xinyu Li and Yuanhao Zhang and Yumin Liao and Guanghai Yu},
  title = {{Environmental impact assessment of battery boxes based on lightweight material substitution}},
  booktitle = {Scientific},
  year = {2024},
  doi = {10.1038/s41598-024-53238-2},
}
Figure