Enhancing Third- and Fifth-Order Nonlinearity via Tunneling in Multiple Quantum Dots

Si-Cong Tian, Huanyu Lu, Hang Zhang, Lijie Wang, Shi–Li Shu, Xin Zhang, Guanyu Hou, Ziye Wang, Cunzhu Tong, Lijun WangNanomaterials 2019 · DOI

TL;DR

This paper explores how to enhance nonlinear optical effects in multiple quantum dots (MQDs) by controlling the tunneling between them. By carefully tuning parameters like tunneling strength and energy levels, researchers can achieve significant third- and fifth-order nonlinearities with minimal light absorption, paving the way for advanced quantum information devices and nonlinear optics applications.

What Problem Does This Paper Address?

Semiconductor quantum dots (QDs) are promising for various applications in nonlinear optics and quantum information due to their strong nonlinear optical interactions. However, achieving these strong nonlinearities often comes at the cost of significant light absorption, which is undesirable for many applications. While previous research has focused on single QDs or pairs (double quantum dots, DQDs), this paper investigates multiple quantum dots (MQDs) to explore additional control parameters. The challenge is to find ways to enhance nonlinear responses, particularly third- and fifth-order nonlinearities, while simultaneously suppressing linear absorption, and to understand how the complex interactions within MQDs can be leveraged for this purpose.

Methods

The researchers employed the probability amplitude method to theoretically model the behavior of MQDs. This approach involves describing the system's state as a superposition of different atomic states (ground, exciton, and indirect exciton states) and deriving the equations of motion for the probability amplitudes of these states using the Schrödinger equation. They then applied the Weisskopf-Wigner theory to obtain dynamical equations for these amplitudes.

A key aspect of their method is the derivation of analytical expressions for the linear and nonlinear susceptibilities ($\chi^{(1)}$, $\chi^{(3)}$, and $\chi^{(5)}$) of the MQD system. These susceptibilities quantify how the material responds to an applied electromagnetic field. They specifically derived expressions for:

  • Linear absorption: Im($\chi^{(1)}$)
  • Self-Kerr nonlinearity: Re($\chi^{(3)}$)
  • Fifth-order nonlinearity: Re($\chi^{(5)}$)
  • Cross-Kerr nonlinearity: Re($\chi^{(3)}_{Ti}$) (interaction between the probe field and tunneling $T_i$)

The analysis involves using Maclaurin series expansion to approximate the susceptibilities for weak probe fields and then numerically calculating these expressions for various parameter regimes.

Datasets

Not discussed in the paper. The study is theoretical and relies on numerical simulations based on derived equations, not experimental datasets.

Key Insights and Ideas

  • Tunneling as a Control Knob: The core idea is that the tunneling strength ($T_n$) and energy splitting ($W_{1n}$) between quantum dots in an MQD system are not just passive properties but can be actively manipulated (e.g., via gate voltages) to control the system's optical response.
  • Quantum Interference and TIT: Multiple tunneling pathways lead to complex quantum interference effects among the dressed states of the MQDs. This interference can create "Tunneling Induced Transparency" (TIT) windows, where linear absorption is significantly reduced.
  • Nonlinearity Enhancement in TIT Windows: The most crucial insight is that enhanced nonlinear effects (self-Kerr, fifth-order, and cross-Kerr) are found to occur precisely within these TIT windows. This means that by engineering the system to have narrow TIT windows, one can achieve strong nonlinearities with minimal absorption.
  • MQDs Offer More Control: Compared to DQDs or triple quantum dots (TQDs), MQDs with more dots offer a richer parameter space for controlling nonlinearity. This allows for potentially simultaneous enhancement of nonlinearities for multiple probe fields with different frequencies.

Key Results

The paper presents a series of plots showing the linear absorption (Im[$\chi^{(1)}$]) and nonlinear susceptibilities (Re[$\chi^{(3)}$] and Re[$\chi^{(5)}$]) as functions of probe detuning for different configurations of tunneling strengths and energy splittings.

  • Enhanced Self-Kerr Nonlinearity: They demonstrate that by reducing tunneling intensity ($T_2, T_5$) in specific configurations, the TIT window narrows, and enhanced self-Kerr nonlinearity (Re[$\chi^{(3)}$]) is observed in the vicinity of these windows with low absorption. This effect is shown to be achievable at multiple detunings simultaneously in MQDs.
  • Enhanced Fifth-Order Nonlinearity: Similar to the third-order nonlinearity, enhanced fifth-order nonlinearity (Re[$\chi^{(5)}$]) is also found to occur within the TIT windows, offering a pathway to strong fifth-order effects with suppressed absorption.
  • Enhanced Cross-Kerr Nonlinearity: The study shows that enhanced cross-Kerr nonlinearity can be realized for various tunneling couplings ($T_i$) with low linear absorption. A key advantage highlighted is the ability to achieve this for probe fields with different frequencies.
  • Parameter Tuning is Key: The results consistently show that the specific values of tunneling intensity and energy splitting are critical for achieving the desired balance between enhanced nonlinearity and suppressed absorption.

Limitations and Future Work

  • Theoretical Model: The study is primarily theoretical, relying on analytical derivations and numerical simulations. Experimental verification of these predicted phenomena would be a crucial next step.
  • Idealized System: The model assumes ideal quantum dots and specific coupling mechanisms. Real-world MQDs might have additional complexities (e.g., disorder, decoherence) that could affect the observed nonlinearities.
  • Low Light Levels: The analysis focuses on the weak field approximation, which is relevant for many quantum information applications. Extending the analysis to higher field intensities could reveal new phenomena.
  • Future Directions: The authors suggest that the ability to achieve enhanced nonlinearities with low absorption in MQDs has significant applications in novel nonlinear optics and quantum information devices. Future work could focus on designing specific MQD structures for particular applications and exploring experimental realization. The potential for simultaneous enhancement of nonlinearities for multiple frequencies also opens avenues for advanced optical signal processing.

Summary updated

Abstract

The nonlinearity of semiconductor quantum dots under the condition of low light levels has many important applications. In this study, linear absorption, self-Kerr nonlinearity, fifth-order nonlinearity and cross-Kerr nonlinearity of multiple quantum dots, which are coupled by multiple tunneling, are investigated by using the probability amplitude method. It is found that the linear and nonlinear properties of multiple quantum dots can be modified by the tunneling intensity and energy splitting of the system. Most importantly, it is possible to realize enhanced self-Kerr nonlinearity, fifth-order nonlinearity and cross-Kerr nonlinearity with low linear absorption by choosing suitable parameters for the multiple quantum dots. These results have many potential applications in nonlinear optics and quantum information devices using semiconductor quantum dots.
BibTeX
@inproceedings{tian2019enhancing,
  author = {Si-Cong Tian and Huanyu Lu and Hang Zhang and Lijie Wang and Shi–Li Shu and Xin Zhang and Guanyu Hou and Ziye Wang and Cunzhu Tong and Lijun Wang},
  title = {{Enhancing Third- and Fifth-Order Nonlinearity via Tunneling in Multiple Quantum Dots}},
  booktitle = {Nanomaterials},
  year = {2019},
  doi = {10.3390/nano9030423},
}
Figure