Enhancing driver’s vision with the use of prototype Automotive Head-Up Display Interface

Vassilis Charissis, Peter AndersonResearchOnline 2006

Abstract

Driving is a vision-intensive task where information overload or poor visibility can lead to accidents. This study investigates a full-windshield Head-Up Display (HUD) interface designed to enhance spatial awareness in low-visibility conditions. By projecting intuitive, color-coded symbols directly into the driver's line of sight, the system aims to improve response times and reduce collisions. Simulator trials with 40 participants demonstrated a significant increase in time-to-collision and early hazard detection.

Introduction: The Challenge of Low Visibility

In dense fog, the visual field loses depth cues, making it difficult for drivers to judge distances or stay within lanes. Traditional Head-Down Displays (HDDs), such as dashboard GPS units, require drivers to look away from the road, increasing cognitive load and distraction. This research proposes a "guidance-navigation" HUD that augments natural vision without diverting attention from the windshield.

Interface Design and Methodology

The design of the HUD interface was informed by a preliminary survey of driver attitudes and requirements. This user-centric approach ensured that the projected information met actual driver needs without causing visual clutter. The prototype prioritizes symbolic representation over alphanumeric data, as graphical icons are processed more rapidly by the human brain.

The interface utilizes four primary graphical components:

  1. Lane Pathways: Converging lines superimposed on real road markings to maintain lane discipline.
  2. Lead Vehicle Symbols: Outlines projected over vehicles ahead. An inverted triangle specifically highlights vehicles in the same lane to prevent rear-end collisions.
  3. Turn Symbols: Arched arrows that appear for upcoming junctions, reducing the need for drivers to scan side windows in thick fog.
  4. Traffic Symbols: Overlapping icons indicating congestion beyond the immediate line of sight.
Lead vehicle symbol with an inverted triangle used to highlight vehicles in the same lane.

The system employs a dynamic color-coding scheme—transitioning from blue and green to yellow and red—based on proximity and risk levels. This provides a progressive warning system that feels natural to the driver, avoiding the startling effect of traditional flashing alarms.

Arched turn symbol with color-coded segments to guide drivers through junctions in low visibility.

Experimental Setup

User trials were conducted at the eMotion lab at Glasgow Caledonian University using a high-fidelity driving simulator. A custom 3D track modeled after a Scottish motorway was used to simulate zero-visibility fog. Data collection included eye-tracking, physiological stress monitoring via pulse measurement, and driving performance metrics from 40 participants of varying ages and experience levels.

Key Findings and Results

The simulator trials yielded several critical insights:

  • Improved Safety Margins: The average Time-to-Collision (TTC) increased from the standard 4 seconds to approximately 8 seconds, effectively doubling the reaction window for drivers.
  • Extended Detection Range: The system successfully highlighted lead vehicles up to 250 meters away, long before they would be visible to the naked eye in dense fog.
  • Intuitive Interaction: Participants with no prior instruction were able to interpret the utility of every symbol within minutes, confirming the effectiveness of the symbolic design.
  • The Confidence Trap: Interestingly, enhanced awareness led some drivers to slightly increase their speed. This suggests that future HUDs should include speed-regulation subsystems or active warnings to prevent overconfidence in dangerous conditions.

Conclusion and Future Work

The full-windshield HUD prototype significantly improves driver performance in adverse weather by providing intuitive, real-time spatial cues. While currently focused on motorway fog scenarios, future work will explore urban environments and integrated speed-limiting features. The researchers also plan to investigate "direct manipulation" interfaces to further refine how information is layered onto the driver's field of view.

Summary updated

Abstract

Driving is a complex task largely dependent on vision as the predominant channel of information. Considering the wealth of visual cues available in a vehicle, it becomes crucial to manage the frequency of information provided to the driver. Notably, the significance of the quality and quantity of incoming information increases substantially under adverse weather conditions or in heavy traffic situations. The purpose of this study is two-fold. Firstly, our intent is to investigate avenues for enhancing the driver's spatial awareness under low visibility conditions and secondly to direct additional information from vehicle sensors in a way that improves human response times and reduces the possibility of collision. We designed a full-windshield Head-Up Display (HUD) interface based on a survey which recorded drivers’ attitudes, preferences and requirements. The prototype HUD interface was tested in a car-following driving scenario, on a driving simulator. This paper provides an overview of the interface design process; describes the user trials and presents our conclusions and future work.
BibTeX
@inproceedings{charissis2006enhancing,
  author = {Vassilis Charissis and Peter Anderson},
  title = {{Enhancing driver’s vision with the use of prototype Automotive Head-Up Display Interface}},
  booktitle = {ResearchOnline},
  year = {2006},
}
Figure