Enhancement of spin Hall angle by an order of magnitude via Cu intercalation in MoS$_2$/CoFeB heterostructures

Abhisek Mishra, Pritam Das, Rupalipriyadarsini Chhatoi, Shubhra Dash, Siva Satyendra Sahoo, Kshitij Singh Rathore, Pil‐Ryung Cha, Seung‐Cheol Lee, Satadeep Bhattacharjee, Subhankar BedantaarXiv 2024 · DOI · arXiv

Abstract

Transition metal dichalcogenides (TMDs) are a novel class of quantum materials with significant potential in spintronics, optoelectronics, and valleytronics. TMDs exhibit strong spin-orbit coupling (SOC), enabling efficient spin-charge interconversion. In this study, we investigated spin-to-charge conversion via ferromagnetic resonance in MoS$_2$/Cu/CoFeB heterostructures with varying Cu spacer thicknesses. The conversion efficiency, quantified by the spin Hall angle, was enhanced by an order of magnitude due to Cu intercalation. Magneto-optic Kerr effect (MOKE) microscopy confirmed that Cu effectively decouples MoS$_2$ from CoFeB, preserving the intrinsic SOC of MoS$_2$ by mitigating exchange interactions. First-principles calculations revealed that Cu intercalation notably enhances spin Berry curvature and spin Hall conductivity. This work demonstrates that interface engineering can achieve significantly higher spin-to-charge conversion efficiencies in TMD-based heterostructures.

Introduction

The field of spintronics seeks to utilize the electron's spin degree of freedom for low-power information processing. A cornerstone of this technology is the efficient interconversion between spin and charge currents. Transition metal dichalcogenides (TMDs), such as MoS$_2$, have emerged as promising materials due to their robust spin-orbit coupling (SOC).

However, a significant challenge arises when TMDs are integrated with ferromagnetic (FM) layers like CoFeB. Direct contact often leads to magnetic proximity effects and exchange interactions that alter the TMD's electronic structure, effectively suppressing its intrinsic SOC and reducing conversion efficiency. This study explores "interface engineering"—the insertion of a thin copper (Cu) spacer—to decouple these layers and harvest the full potential of MoS$_2$.

Experimental Methods

The research team synthesized MoS$_2$/Cu/CoFeB trilayers using magnetron sputtering. The thickness of the Cu spacer ($t_{Cu}$) was systematically varied from 0 nm to 10 nm across seven primary samples, with a bare CoFeB film serving as a reference.

To quantify spin-to-charge conversion, the researchers employed Ferromagnetic Resonance (FMR) combined with Inverse Spin Hall Effect (ISHE) measurements. By driving the FM layer into resonance with microwaves, a spin current is injected into the MoS$_2$ layer, where it is converted into a transverse voltage ($V_{ISHE}$).

FMR and ISHE measurement data. (a) Measured voltage ($V_{meas}$) as a function of magnetic field ($H$) for different angles, decomposed into symmetric ($V_{sym}$) and asymmetric ($V_{asym}$) components. (b) Angular dependence of the voltage components.

Results and Discussion

The primary metric for conversion efficiency is the spin Hall angle ($\theta_{SHA}$). The experimental results revealed a dramatic non-monotonic dependence on the Cu spacer thickness.

Order-of-Magnitude Enhancement

As shown in Figure 2, the $\theta_{SHA}$ increases from a baseline of ~0.02 in the direct MoS$_2$/CoFeB bilayer to a peak value of 0.30 ± 0.01 at $t_{Cu} = 5$ nm. This represents a ten-fold improvement in efficiency. Beyond 5 nm, the angle begins to decrease, likely due to the shunting effect of the thicker Cu layer or the emergence of competing spin-to-charge conversion mechanisms within the Cu itself.

Quantitative results of the study. (a) Various voltage components vs. Cu thickness. (b) The spin Hall angle ($\theta_{SHA}$) peaks at 5 nm, showing a ten-fold increase compared to the bilayer without a spacer.

The Role of Decoupling

The enhancement is attributed to the successful decoupling of the MoS$_2$ and CoFeB layers. MOKE microscopy provided visual evidence: without the Cu spacer, the magnetic domains of CoFeB were strongly influenced by the MoS$_2$ substrate. With the spacer, the domain structure reverted to that of a bare magnetic film, indicating that the Cu layer effectively shields the MoS$_2$ from the FM's exchange field.

Theoretical Density Functional Theory (DFT) calculations supported these findings. By simulating the spin Berry curvature, the researchers found that removing the magnetic exchange interaction (mimicking the effect of the Cu spacer) leads to more symmetric and periodic curvature peaks, which directly correlates to higher intrinsic spin Hall conductivity in the MoS$_2$.

Conclusion

This study demonstrates that the intrinsic spintronic properties of TMDs can be significantly enhanced through strategic interface engineering. By inserting a 5 nm Cu spacer, the spin-to-charge conversion efficiency in MoS$_2$/CoFeB heterostructures was increased by an order of magnitude. This approach provides a versatile pathway for developing high-performance, TMD-based spintronic devices, such as low-power spin-orbit torque magnetic random-access memory (SOT-MRAM).

Summary updated

Abstract

Transition metal dichalcogenides (TMDs) are a novel class of quantum materials with significant potential in spintronics, optoelectronics, valleytronics, and opto-valleytronics. TMDs exhibit strong spin-orbit coupling, enabling efficient spin-charge interconversion, which makes them ideal candidates for spin-orbit torque-driven spintronic devices. In this study, we investigated the spin-to-charge conversion through ferromagnetic resonance in MoS$_2$/Cu/CoFeB heterostructures with varying Cu spacer thicknesses. The conversion efficiency, quantified by the spin Hall angle, was enhanced by an order of magnitude due to Cu intercalation. Magneto-optic Kerr effect microscopy confirmed that Cu did not significantly modify the magnetic domains, indicating its effectiveness in decoupling MoS$_2$ from CoFeB. This decoupling preserves the spin-orbit coupling (SOC) of MoS$_2$ by mitigating the exchange interaction with CoFeB, as proximity to localized magnetization can alter the electronic structure and SOC. First-principles calculations revealed that Cu intercalation notably enhances the spin Berry curvature and spin Hall conductivity, contributing to the increased spin Hall angle. This study demonstrates that interface engineering of ferromagnet/TMD-based heterostructures can achieve higher spin-to-charge conversion efficiencies, paving the way for advancements in spintronic applications.
BibTeX
@misc{mishra2024enhancement,
  author = {Abhisek Mishra and Pritam Das and Rupalipriyadarsini Chhatoi and Shubhra Dash and Siva Satyendra Sahoo and Kshitij Singh Rathore and Pil‐Ryung Cha and Seung‐Cheol Lee and Satadeep Bhattacharjee and Subhankar Bedanta},
  title = {{Enhancement of spin Hall angle by an order of magnitude via Cu intercalation in MoS$\_2$/CoFeB heterostructures}},
  year = {2024},
  eprint = {2411.18582},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2411.18582},
}
Figure