TL;DR
Researchers have developed novel thiazolo[5,4-d]thiazole (TT)-based molecules with tailored donor units (carbazole, phenothiazine, triphenylamine) to act as highly efficient hole-selective layers (HSLs) in perovskite solar cells (PSCs). These new HSLs, particularly TTP-DPA, significantly boost both standard and indoor PSC performance, achieving up to 37.0% efficiency under LED illumination.
What Problem Does This Paper Address?
Perovskite solar cells (PSCs) hold immense promise due to their high power conversion efficiencies (PCEs) and solution processability. However, their widespread adoption is hindered by limitations in stability and performance, particularly at the interfaces between the perovskite layer and charge transport layers. Optimizing these interfaces is crucial for efficient charge extraction and passivation of defects. While existing hole-selective materials like 2PACz show promise, there's a continuous need for new materials that offer improved performance, better control over perovskite crystallization, and enhanced thermal stability. This paper addresses this by designing and synthesizing a new class of TT-based molecules specifically engineered to function as superior hole-selective layers.
Methods
The study employed a multi-faceted approach:
- Molecular Design and Synthesis: Six TT derivatives were synthesized by strategically combining a thiazolo[5,4-d]thiazole (TT) core (electron-deficient acceptor) with carbazole (Cz), phenothiazine (PTZ), or triphenylamine (TPA) donor units. Alkyl and alkoxy substituents were introduced to fine-tune properties.
- Material Characterization:
- Thermal Analysis: Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) were used to assess thermal stability and glass transition temperatures (Tg).
- Electrochemical Analysis: Cyclic Voltammetry (CV) was performed to determine oxidation and reduction potentials, from which ionization potentials (IP) and electron affinities (EA) were calculated. Photoelectron Emission Spectrometry was used to measure IPs of solid films.
- Photophysical Characterization: UV-Vis absorption and photoluminescence (PL) spectroscopy were used to study the optical properties of the synthesized materials in solution.
- Charge Transport: Time-of-flight (TOF) measurements were conducted to determine hole and electron mobilities in thin films of the TT derivatives.
- Device Fabrication and Testing: Perovskite solar cells (PSCs) with the structure glass/ITO/HSL/perovskite/PEAI/PC61BM/BCP/Ag were fabricated. Devices were tested under standard one-sun illumination (AM 1.5G) and simulated indoor lighting (3000 K LED).
- Interface Analysis: Contact angle measurements were used to assess surface energy. Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) were employed to study perovskite film morphology and crystallinity. Transient photovoltage (TPV) and photocurrent (TPC) decay measurements, along with photo-CELIV, were used to analyze carrier dynamics and extraction.
- Theoretical Calculations: Density Functional Theory (DFT) was used to calculate electronic structures, absorption spectra, and understand the nature of electronic transitions (local excitation vs. intramolecular charge transfer).
Datasets
Not discussed in the paper. The study focuses on the synthesis and characterization of novel materials and their application in device fabrication, rather than training or evaluating models on existing datasets.
Key Insights and Ideas
- Rational Design for Enhanced Performance: The study demonstrates that carefully designing the donor units and substituents on the TT core can significantly tune the optoelectronic properties, leading to improved HSL performance.
- TTP-DPA as a Superior HSL: The triphenylamine-containing derivative, TTP-DPA, emerged as a standout material, showing excellent hole mobility and acting effectively as both an HSL and an interlayer.
- Interfacial Engineering for Perovskite Growth: TTP-DPA's ability to reduce the surface energy of underlying layers (like 2PACz) plays a crucial role in controlling perovskite crystallization, leading to denser films and fewer defects.
- Dual Role of TT Derivatives: The TT-based molecules not only facilitate efficient charge extraction but also contribute to improved perovskite film quality and interface passivation.
- High Thermal Stability: The synthesized TT derivatives exhibit remarkable thermal stability, with 5% weight loss temperatures above 390 °C, which is critical for device longevity.
- Mixed LE-ICT Transitions: DFT calculations revealed that certain TT derivatives exhibit a mix of local excitation (LE) and intramolecular charge transfer (ICT) in their excited states, which is influenced by the molecular geometry and donor-acceptor interactions.
Key Results
- Material Properties:
- Hole mobilities ranged from 4.33 × 10⁻⁵ to 1.63 × 10⁻³ cm² V⁻¹ s⁻¹.
- Ionization potentials of solid films ranged from -4.93 to -5.59 eV.
- High thermal stability with 5% weight loss temperatures > 390 °C.
- TTP-PTB and TTP-DPA formed stable molecular glasses with high glass transition temperatures (Tg up to 187 °C for TTP-PTB).
- Device Performance:
- One-Sun Illumination: 2PACz/TTP-DPA based PSCs achieved a PCE of 19.1%, outperforming bare 2PACz devices (17.4%).
- Indoor Lighting (3000 K LED, 1000 lx): Optimized 2PACz/TTP-DPA based devices reached an impressive PCE of 37.0%, significantly exceeding bare 2PACz devices (32.2%).
- TTP-DPA as a standalone HSL also showed improved performance compared to bare 2PACz.
- The TTP-DPA interlayer reduced the surface energy of 2PACz from 66.9 to 52.4 mN m⁻¹, promoting better perovskite growth.
Limitations and Future Work
- Limitations:
- While TTP-DPA showed excellent performance, the paper notes a slight mismatch in energetic alignment that could contribute to lower open-circuit voltage (Voc) in some devices, which was addressed by using a bilayer HSL.
- The theoretical calculations for PL spectra showed less agreement with experimental values compared to absorption spectra, attributed to challenges in optimizing excited state geometries and solvent effects.
- The study focused on specific perovskite compositions (WBGs of 1.70 and 1.77 eV); further investigation might be needed for other perovskite formulations.
- Future Work:
- The authors highlight the promising potential of TT derivatives for HSLs in next-generation photovoltaics, suggesting further exploration of these materials for enhanced device performance and stability.
- The dual function of TTP-DPA in improving perovskite growth and enhancing carrier extraction suggests its potential for further optimization in various solar cell architectures.
- The remarkable thermal stability of these TT derivatives opens avenues for their use in devices requiring long-term operational stability.
Summary updated