Enhanced Visible-Light Photocatalysis of Nanocomposites of Copper Oxide and Single-Walled Carbon Nanotubes for the Degradation of Methylene Blue

Kamal Prasad Sapkota, Insup Lee, Md. Abu Hanif, Md. Islam, Jeasmin Akter, Jae Ryang HahnCatalysts 2020 · DOI

TL;DR

Researchers have developed a new CuO-SWCNT nanocomposite photocatalyst that significantly enhances the degradation of methylene blue (MB) under visible light. This material achieves a remarkable 97.33% degradation of MB in just 2 hours, outperforming pristine CuO and demonstrating excellent recyclability, offering a promising solution for wastewater treatment.

What Problem Does This Paper Address?

Industrial wastewater often contains persistent organic pollutants that are difficult to remove and pose significant environmental and health risks. While photocatalysis offers a promising approach for degrading these pollutants using sunlight, many existing photocatalysts suffer from limitations such as poor visible-light absorption, high electron-hole recombination rates, and limited reaction site accessibility. This paper tackles the challenge of developing a more efficient and robust photocatalyst capable of degrading model pollutants like methylene blue under visible light, a crucial step towards addressing industrial pollution.

Methods

The researchers synthesized CuO-SWCNT nanocomposites using a straightforward recrystallization and calcination method. They varied the calcination time (0.5, 2, and 5 hours) to create different composite ratios, denoted as CuO-SWCNT-0.5, CuO-SWCNT-2, and CuO-SWCNT-5.

Key characterization techniques employed include:

  • Field-Emission Scanning Electron Microscopy (FE-SEM) and High-Resolution Transmission Electron Microscopy (HR-TEM): To visualize the morphology and nanostructure of the composites, confirming the presence of CuO nanocrystals surrounding SWCNTs and the formation of CuO-C heterojunctions.
  • X-ray Diffractometry (XRD): To analyze the crystal structure and confirm the presence of both CuO and SWCNT components, as well as to estimate crystallite size.
  • X-ray Photoelectron Spectroscopy (XPS): To determine the oxidation states of the constituent elements (Cu, O, C) and confirm the formation of chemical bonds and heterojunctions between CuO and SWCNTs.
  • Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC): To assess the thermal stability of the synthesized materials.
  • UV-Vis Spectroscopy and Tauc Plot Method: To measure the optical properties, specifically the bandgap energy, of the pristine CuO and the nanocomposites.
  • Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) analysis: To determine the specific surface area, pore volume, and pore size of the materials.
  • Photocatalytic Experiments: The core evaluation involved measuring the degradation of methylene blue (MB) under natural sunlight. The reaction kinetics were analyzed using a pseudo-first-order model.

The novelty lies in the facile synthesis method and the synergistic combination of CuO and SWCNTs to create heterojunctions that enhance photocatalytic activity.

Datasets

Not discussed in the paper. The study utilizes a model pollutant, methylene blue, for evaluating photocatalytic performance.

Key Insights and Ideas

  • Synergistic Heterojunctions: The formation of direct chemical bonds and heterojunctions between CuO nanocrystals and SWCNTs is crucial. This interface facilitates efficient separation and transfer of photogenerated electron-hole pairs, a major bottleneck in traditional photocatalysts.
  • Enhanced Visible Light Absorption: The bandgap energy of CuO is significantly reduced upon integration with SWCNTs, leading to improved absorption of visible light. This is key for utilizing solar energy more effectively.
  • Increased Surface Area and Active Sites: The nanocomposite structure, particularly with longer calcination times, leads to a higher specific surface area, providing more sites for pollutant adsorption and reaction.
  • Superior Photocatalytic Performance: The CuO-SWCNT-5 composite demonstrates a dramatic improvement in MB degradation compared to pristine CuO, highlighting the effectiveness of the composite design.
  • Excellent Recyclability: The CuO-SWCNT-5 catalyst maintains its high photocatalytic efficiency over three reuse cycles, indicating its robustness and potential for practical applications.

Key Results

  • The CuO-SWCNT-5 nanocomposite achieved 97.33% degradation of methylene blue (MB) in 2 hours under visible light irradiation.
  • This performance is significantly higher than that of pristine CuO nanocrystals, which achieved only 54.20% degradation under the same conditions.
  • The CuO-SWCNT-2 and CuO-SWCNT-0.5 composites also showed improved performance, with 94.24% and 93.15% degradation, respectively.
  • The degradation rate constant for CuO-SWCNT-5 was 0.0252 min⁻¹, substantially higher than that of pristine CuO (0.0084 min⁻¹).
  • The CuO-SWCNT-5 catalyst demonstrated no substantial degradation in catalytic performance or morphology after three reuse cycles.
  • The bandgap energy of pristine CuO (1.71 eV) was reduced to 1.50 eV for CuO-SWCNT-5.
  • The specific surface area of CuO-SWCNT-5 was 256.83 m² g⁻¹, significantly higher than pristine CuO (33.72 m² g⁻¹).

Limitations and Future Work

  • Mechanism Confirmation: While a proposed mechanism involving heterojunctions, electron-hole separation, and radical generation is presented, the authors note that it is not yet directly proven and may require further testing with electron paramagnetic resonance spectroscopy and intermediate recognition.
  • Pollutant Specificity: The study focuses on methylene blue as a model pollutant. Future work could explore the degradation of a wider range of persistent organic pollutants found in industrial wastewater.
  • Scale-Up and Real-World Application: The research demonstrates excellent performance in laboratory settings. Further investigation into the scalability of the synthesis method and the performance of these catalysts under varying real-world environmental conditions would be beneficial.
  • Optimization of Calcination Time: While 5 hours of calcination yielded the best results in this study, further fine-tuning of calcination parameters could potentially lead to even greater improvements.

Summary updated

Abstract

We report enhanced catalytic action of a series of copper(II)-oxide-single-walled carbon nanotube (CuO-SWCNT) composite photocatalysts (abbreviated as CuO-SWCNT-0.5, CuO-SWCNT-2, and CuO-SWCNT-5, where 0.5, 2, and 5 represent the calcination time in hours) synthesized via recrystallization followed by calcination. The photocatalytic performance of the fabricated nanocomposites was examined by evaluating the degradation of methylene blue (MB) under irradiation with visible light. All of the as-fabricated nanocomposites were effective photocatalysts for the photodegradation of a MB solution; however, the CuO-SWCNT-5 displayed the best photocatalytic ability among the investigated catalysts, achieving 97.33% degradation of MB in 2 h under visible-light irradiation. The photocatalytic action of the nanocomposites was remarkably higher than that of pristine CuO nanocrystals fabricated using the same route. The recyclability of the photocatalyst was also investigated; the CuO-SWCNT-5 catalyst could be reused for three cycles without substantial degradation of its catalytic performance or morphology.
BibTeX
@inproceedings{sapkota2020enhanced,
  author = {Kamal Prasad Sapkota and Insup Lee and Md. Abu Hanif and Md. Islam and Jeasmin Akter and Jae Ryang Hahn},
  title = {{Enhanced Visible-Light Photocatalysis of Nanocomposites of Copper Oxide and Single-Walled Carbon Nanotubes for the Degradation of Methylene Blue}},
  booktitle = {Catalysts},
  year = {2020},
  doi = {10.3390/catal10030297},
}
Figure