Enhanced Antifungal Activity by Ab-Modified Amphotericin B-Loaded Nanoparticles Using a pH-Responsive Block Copolymer

Xiaolong Tang, Jingjing Dai, Jun Xie, Yongqiang Zhu, Ming Zhu, Zhi Wang, Chunmei Xie, Aixia Yao, Tingting Liu, Xiaoyu Wang, Li Chen, Qinglin Jiang, Shulei Wang, Yong Liang, Congjing XuNanoscale 2015 · DOI

TL;DR

This paper presents a novel nanoparticle system designed to improve the delivery and efficacy of Amphotericin B (AMB), a potent antifungal drug. By encapsulating AMB in pH-responsive nanoparticles decorated with antibodies targeting Candida albicans, the researchers achieved enhanced drug delivery to infection sites, reduced toxicity, and improved antifungal activity, offering a promising new strategy for treating systemic fungal infections.

What Problem Does This Paper Address?

Systemic fungal infections pose a significant threat, particularly to immunocompromised individuals. Amphotericin B (AMB) is a highly effective antifungal agent, but its clinical use is hampered by severe toxicities, primarily nephrotoxicity, and poor solubility. Furthermore, AMB's efficacy is compromised in the acidic microenvironments often found at infection sites due to fungal metabolism and host immune responses. This pH-dependent loss of activity, coupled with systemic toxicity, limits AMB's therapeutic potential. The researchers aimed to overcome these challenges by developing a targeted and pH-responsive drug delivery system that could enhance AMB's antifungal potency while minimizing its side effects.

Methods

The core of this research lies in the development of a sophisticated nanoparticle system. The key components and methods include:

  • pH-Responsive Block Copolymer Synthesis: A triblock copolymer, poly(D,L-lactic-co-glycolic acid)-b-poly(L-histidine)-b-poly(ethylene glycol) (PLGA-PLH-PEG), was synthesized. The poly(L-histidine) (PLH) segment is crucial as it becomes positively charged in acidic conditions (pH < 7), enabling the nanoparticles to switch their surface charge.
  • Nanoparticle Fabrication: AMB was encapsulated within these PLGA-PLH-PEG nanoparticles using a modified emulsion/solvent evaporation technique.
  • Antibody Functionalization: To enhance targetability, the AMB-loaded nanoparticles were further modified with anti-Candida albicans antibodies (CDA). This creates CDA-AMB-NPs.
  • Characterization: The nanoparticles were thoroughly characterized for their physical properties, including size (TEM, DLS), polydispersity index (PDI), zeta potential (at different pH values), encapsulation efficiency (EE), and drug release kinetics (in vitro).
  • In Vitro Studies:
    • Cellular Uptake: Coumarin 6-labeled nanoparticles were used to visualize and quantify drug delivery into C. albicans cells using flow cytometry.
  • Hemolytic Activity: The potential for AMB and its nanoparticle formulations to lyse red blood cells was assessed to evaluate toxicity.
  • Cytotoxicity: The impact of the nanoparticles on human renal tubular epithelial cells (HKC) was evaluated using markers for kidney injury (KIM-1, NGAL) via immunofluorescence, RT-PCR, and Western blot.
  • Antifungal Activity: Minimum Inhibitory Concentration (MIC) assays were performed to determine the efficacy against C. albicans at different pH levels. Apoptosis and necrosis induction in C. albicans were assessed using annexin V-FITC/PI staining.
  • In Vivo Studies:
    • Nephrotoxicity: The impact on kidney function was assessed in mice by measuring blood urea nitrogen (BUN) and creatinine (Cr) levels, and through histopathological and immunohistochemical analysis of kidney tissue.
  • Antifungal Efficacy: A murine model of C. albicans pneumonia was used to evaluate the therapeutic efficacy of CDA-AMB-NPs by measuring survival rates, fungal burden (CFU counts) in various organs, and lung histology.

Datasets

Not discussed in the paper. The study primarily relies on in vitro and in vivo experimental models using Candida albicans and animal subjects.

Key Insights and Ideas

  • pH-Responsive Charge Switching is Key: The PLH component of the copolymer allows the nanoparticles to transition from a negative to a positive surface charge at acidic pH. This is crucial because the positive charge enhances electrostatic interactions with the negatively charged fungal cell wall, leading to improved binding and uptake.
  • Antibody Targeting Enhances Specificity: Decorating the nanoparticles with anti-C. albicans antibodies significantly increases their specificity for the target pathogen, reducing off-target interactions and potentially improving drug concentration at the infection site.
  • Reduced Toxicity is a Major Win: The nanoparticle formulation demonstrably reduced the hemolytic and nephrotoxic effects of AMB, a critical hurdle in its clinical application. This suggests that encapsulating AMB and controlling its release can mitigate its inherent toxicity.
  • Synergistic Effect of pH Responsiveness and Antibody Targeting: The combination of pH-responsive charge switching and antibody targeting creates a powerful dual-action system that is more effective in acidic, infected environments than AMB alone or non-targeted nanoparticles.
  • Improved Bioavailability and Efficacy: The enhanced targetability and controlled release of AMB from CDA-AMB-NPs lead to improved bioavailability and significantly higher antifungal activity, both in vitro and in vivo.

Key Results

  • Nanoparticle Properties: CDA-AMB-NPs exhibited an average size of ~121 nm with good PDI. They demonstrated a significant surface charge switch from negative (-3.82 mV) at pH 7.35 to positive (2.81 mV) at pH 6.8.
  • Drug Release: CDA-AMB-NPs showed a sustained release profile over 18 days, with a higher release rate observed at pH 6.8 compared to pH 7.35.
  • In Vitro Antifungal Activity: CDA-AMB-NPs induced apoptosis and necrosis in C. albicans more effectively at pH 6.8 than at pH 7.35.
  • Reduced Toxicity: CDA-AMB-NPs exhibited significantly lower hemolytic activity and reduced cytotoxicity on human renal tubular epithelial cells compared to free AMB. In vivo, CDA-AMB-NPs significantly reduced BUN and Cr levels and showed minimal kidney damage compared to free AMB.
  • In Vivo Efficacy: In a murine model of C. albicans pneumonia, CDA-AMB-NPs achieved a 95% survival rate, compared to 55% for free AMB and 0% for controls. They also significantly reduced fungal burden in various organs, particularly the kidney and spleen.

Limitations and Future Work

  • Limitations: While promising, the study acknowledges that further detailed in vivo studies are required before clinical translation. The specific molecular mechanisms of targetability and release in infected lesions could be explored further.
  • Future Work: The authors suggest investigating the detailed molecular mechanisms, targetability, and release mechanisms of CDA-AMB-NPs within infected lesions. They also emphasize the need for comprehensive in vivo studies to pave the way for clinical application. The potential for this system to treat other acidity-associated infections could also be explored.

Summary updated

Abstract

Fungal infections are an important cause of morbidity and mortality in immunocompromised patients. Amphotericin B (AMB), with broad-spectrum antifungal activity, has long been recognized as a powerful fungicidal drug, but its clinical toxicities mainly nephrotoxicity and poor solubility limit its wide application in clinical practice. The fungal metabolism along with the host immune response usually generates acidity at sites of infection, resulting in loss of AMB activity in a pH-dependent manner. Herein, we developed pH-responsive AMB-loaded and surface charge-switching poly(D,L-lactic-co-glycolic acid)-b-poly(L-histidine)-b-poly(ethylene glycol) (PLGA-PLH-PEG) nanoparticles for resolving the localized acidity problem and enhance the antifungal efficacy of AMB. Moreover, we modified AMB-encapsulated PLGA-PLH-PEG nanoparticles with anti-Candida albicans antibody (CDA) (CDA-AMB-NPs) to increase the targetability. Then, CDA-AMB-NPs were characterized in terms of physical characteristics, in vitro drug release, stability, drug encapsulation efficiency, and toxicity. Finally, the targetability and antifungal activity of CDA-AMB-NPs were investigated in vitro/in vivo. The result demonstrated that CDA-AMB-NPs significantly improve the targetability and bioavailability of AMB and thus improve its antifungal activity and reduce its toxicity. These NPs may become a good drug carrier for antifungal treatment.
BibTeX
@inproceedings{tang2015enhanced,
  author = {Xiaolong Tang and Jingjing Dai and Jun Xie and Yongqiang Zhu and Ming Zhu and Zhi Wang and Chunmei Xie and Aixia Yao and Tingting Liu and Xiaoyu Wang and Li Chen and Qinglin Jiang and Shulei Wang and Yong Liang and Congjing Xu},
  title = {{Enhanced Antifungal Activity by Ab-Modified Amphotericin B-Loaded Nanoparticles Using a pH-Responsive Block Copolymer}},
  booktitle = {Nanoscale},
  year = {2015},
  doi = {10.1186/s11671-015-0969-1},
}
Figure