Engineering boron-imidazolate-based polyoxometalates for photooxidative C=C bond cleavage in aqueous media

Jiajia Wang, Zhaoyang Wu, Qun Li, Hanlei Zhang, Yang Liu, Gang Ji, Yalin Zhang, Qian‐Li Li, Junyu Ren, Qingde Zhang, Xianqiang HuangPolyoxometalates 2025 · DOI

Abstract

The direct cleavage of alkenes to access value-added carbonyls under solar-driven conditions in aqueous media presents a considerable challenge. Addressing this challenge requires the construction of effective visible-light-responsive catalysts. Herein, two boron-imidazolate-based Strandberg-type polyoxomolybdophosphate hybrids, Co(H<sub>2</sub>O)<sub>4</sub>[HP<sub>2</sub>Mo<sub>5</sub>O<sub>23</sub>]<sub>2</sub>[B(HIM)(IM)<sub>2</sub>]<sub>2</sub>[B(HIM)<sub>3</sub>]<sub>2</sub>·12H<sub>2</sub>O (1) and Zn(H<sub>2</sub>O)<sub>4</sub>[HP<sub>2</sub>Mo<sub>5</sub>O<sub>23</sub>]<sub>2</sub>[B(HIM)(H<sub>2</sub>IM)<sub>2</sub>]<sub>4</sub>·7H<sub>2</sub>O (2) (IM = imidazole), were synthesized using a hydrothermal method and were utilized as efficient photocatalysts for the aerobic oxidative C=C bond cleavage of alkenes under natural sunlight and aqueous phase conditions. The incorporation of boron imidazolate ligands broadened the visible-light absorption region of polyoxometalates, and electrochemical tests highlighted their potential as exceptional photocatalysts. Upon visible blue light irradiation and ambient O<sub>2</sub> pressure in aqueous media, compound 1 exhibited remarkable aerobic photocatalytic activity, efficiently cleaving alkenes to yield the corresponding ketones (yields up to 91%). Notably, its catalytic performance remained consistent after three recycling runs under ambient sunlight, highlighting its robust stability and practical applicability. Subsequent mechanistic investigations revealed the involvement of O<sub>2</sub><sup>•−</sup> species in the reaction, and a possible mechanism for the cleavage of the alkenes was proposed.

Introduction

The selective cleavage of carbon-carbon double bonds (C=C) is a fundamental transformation in organic synthesis, providing a direct route to value-added carbonyl compounds like ketones and aldehydes. These products are essential building blocks for pharmaceuticals, fragrances, and fine chemicals. Traditionally, this process has relied on stoichiometric amounts of toxic, high-valence metal oxidants such as chromium or osmium, often requiring hazardous organic solvents and generating significant waste.

In the pursuit of "green chemistry," utilizing molecular oxygen (O<sub>2</sub>) as a clean oxidant and sunlight as a renewable energy source has become a primary goal. While polyoxometalates (POMs) are known for their robust redox properties, their wide band gaps typically limit their activity to the ultraviolet spectrum. This research addresses the challenge of engineering POM-based catalysts that are responsive to visible light and stable in 100% aqueous environments.

Overview of the photocatalytic C=C bond cleavage using boron-imidazolate-based POM hybrids in aqueous media.

Catalyst Design and Methodology

The researchers synthesized two new "Strandberg-type" polyoxomolybdophosphate hybrids, designated as Compound 1 (containing Cobalt) and Compound 2 (containing Zinc). These were prepared via a hydrothermal method by combining metal salts with a potassium hydrotris(imidazolyl)borate ligand.

The incorporation of boron-imidazolate ligands was a strategic choice to "red-shift" the POM's electronic structure. By narrowing the band gap to approximately 3.03 eV, the researchers successfully enabled the catalysts to harvest visible light. The resulting 3D supramolecular frameworks were characterized using single-crystal X-ray diffraction to confirm the precise interaction between the boron-imidazolate cations and the POM anions.

Results and Discussion

Photocatalytic Performance

Photocatalytic testing was conducted using a variety of aromatic alkenes in water under blue LED light (400–405 nm) or natural sunlight. Compound 1 demonstrated superior activity, achieving up to a 91% yield for the conversion of 1,1-diphenylethylene to benzophenone. The enhanced performance of the cobalt-based hybrid is attributed to the 3d<sup>7</sup> electron configuration of Cobalt, which facilitates electronic transitions that improve light absorption and charge separation compared to the zinc-based counterpart.

Sustainability and Recyclability

A standout feature of this system is its environmental profile. The reaction thrives in 100% aqueous media at room temperature, eliminating the need for organic solvents or high-energy conditions. Furthermore, the catalyst is heterogeneous and can be recovered through simple centrifugation. Testing showed that Compound 1 maintained consistent catalytic activity over at least three recycling runs without significant structural degradation.

Mechanistic Insights

Mechanistic studies, including radical trapping experiments and Electron Paramagnetic Resonance (EPR) spectroscopy, revealed a radical-based pathway. Upon visible light excitation, the catalyst facilitates the formation of superoxide radicals (O<sub>2</sub><sup>•−</sup>) and alkene radical cations. These reactive species then combine to effectively "zip" open the C=C bond to form the carbonyl product.

Conclusion

This work demonstrates a successful strategy for engineering visible-light-responsive POM hybrids for sustainable organic synthesis. By combining the redox robustness of polyoxometalates with the light-harvesting capabilities of boron-imidazolate ligands, the researchers have developed a highly efficient, recyclable system for alkene cleavage in water. This approach provides a promising blueprint for the development of green, solar-driven catalytic processes in aqueous media.

Summary updated

Abstract

The direct cleavage of alkenes to access value-added carbonyls under solar-driven conditions in aqueous media presents a considerable challenge. Addressing this challenge requires the construction of effective visible-light-responsive catalysts. Herein, two boron-imidazolate-based Strandberg-type polyoxomolybdophosphate hybrids, Co(H<sub>2</sub>O)<sub>4</sub>[HP<sub>2</sub>Mo<sub>5</sub>O<sub>23</sub>]<sub>2</sub>[B(HIM)(IM)<sub>2</sub>]<sub>2</sub>[B(HIM)<sub>3</sub>]<sub>2</sub>·12H<sub>2</sub>O (<strong>1</strong>) and Zn(H<sub>2</sub>O)<sub>4</sub>[HP<sub>2</sub>Mo<sub>5</sub>O<sub>23</sub>]<sub>2</sub>[B(HIM)(H<sub>2</sub>IM)<sub>2</sub>]<sub>4</sub>·7H<sub>2</sub>O (<strong>2</strong>) (IM = imidazole), were synthesized using a hydrothermal method and were utilized as efficient photocatalysts for the aerobic oxidative C=C bond cleavage of alkenes under natural sunlight and aqueous phase conditions. The incorporation of boron imidazolate ligands broadened the visible-light absorption region of polyoxometalates, and electrochemical tests highlighted their potential as exceptional photocatalysts. Upon visible blue light irradiation and ambient O<sub>2</sub> pressure in aqueous media, compound <strong>1</strong> exhibited remarkable aerobic photocatalytic activity, efficiently cleaving alkenes to yield the corresponding ketones (yields up to 91%). Notably, its catalytic performance remained consistent after three recycling runs under ambient sunlight, highlighting its robust stability and practical applicability. Subsequent mechanistic investigations revealed the involvement of O<sub>2</sub><sup>•−</sup> species in the reaction, and a possible mechanism for the cleavage of the alkenes was proposed.
BibTeX
@inproceedings{wang2025engineering,
  author = {Jiajia Wang and Zhaoyang Wu and Qun Li and Hanlei Zhang and Yang Liu and Gang Ji and Yalin Zhang and Qian‐Li Li and Junyu Ren and Qingde Zhang and Xianqiang Huang},
  title = {{Engineering boron-imidazolate-based polyoxometalates for photooxidative C=C bond cleavage in aqueous media}},
  booktitle = {Polyoxometalates},
  year = {2025},
  doi = {10.26599/pom.2025.9140087},
}
Figure