Energy-Saving for Industrial Pneumatic Actuation Systems by Exhausted Air Reuse Based on a Constant Pressure Elastic Accumulator

Hongwang Du, Wei Liu, Xin Bian, Wei XiongSustainability 2022 · DOI

TL;DR

This paper introduces a novel energy-saving system for industrial pneumatic actuation by reusing exhausted air. It utilizes a constant-pressure elastic accumulator, made from hyperelastic rubber, to store and redeploy exhaust air, significantly reducing compressed air consumption and improving system stability.

What Problem Does This Paper Address?

Industrial pneumatic systems are ubiquitous due to their speed, safety, and low cost. However, they are notoriously inefficient, with compressed air utilization rates often being quite low. A major source of this inefficiency is the wasted energy in exhausted air. Traditional methods for reusing this exhaust air, such as using simple air tanks, suffer from unstable pressure and low energy density, limiting their effectiveness and potentially impacting system performance. This paper aims to address these limitations by proposing and validating an energy-saving method that employs a constant-pressure elastic accumulator for more efficient exhausted air recovery and reuse.

Methods

The core innovation of this paper lies in the design and application of a constant-pressure elastic accumulator. This accumulator leverages the hyperelastic mechanical properties of rubber to store energy from exhausted air at a relatively stable pressure. The accumulator consists of a rigid external shield and an internal rubber airbag. During inflation, compressed air from a primary cylinder expands the airbag, converting air pressure energy into rubber material strain energy. When deflating, this stored strain energy is released as air pressure to power a secondary cylinder.

The researchers developed a mathematical model to quantify the energy-saving potential based on air consumption. They also designed and built an experimental test bed to validate their proposed system. The system's energy-saving efficiency was evaluated by comparing the air consumption of the proposed system against a benchmark system without the accumulator.

Datasets

Not discussed in the paper. The study relies on experimental data collected from a custom-built test bench.

Key Insights and Ideas

  • Constant Pressure is Key: The primary advantage of the elastic accumulator is its ability to maintain a relatively constant pressure during charging and discharging. This contrasts with traditional rigid tanks, which experience significant pressure fluctuations, leading to instability and reduced efficiency.
  • Rubber's Hyperelasticity is Exploited: The unique properties of rubber are central to the accumulator's function, allowing it to store and release energy efficiently through elastic deformation.
  • Matching is Crucial: The paper highlights that the energy storage capacity of the accumulator needs to be well-matched to the energy requirements of the secondary cylinder. An imbalance can lead to residual air (waste) or insufficient pressure, impacting efficiency.
  • Stability Improvement: Beyond energy savings, the elastic accumulator acts as a buffer, smoothing out pressure fluctuations and leading to improved operational stability for the pneumatic system.

Key Results

The experimental validation demonstrated significant energy savings. Under specific working conditions, the system achieved a maximum energy-saving efficiency of 54.1%. The study also showed that the application of the pneumatic strain energy accumulator significantly reduced the inlet flow fluctuation rate of the primary cylinder, indicating improved system stability. For example, under 0.3 MPa air supply pressure, the fluctuation rate for the energy-saving system ranged from 1.91% to 2.45%, compared to 4.69% to 6.78% for the benchmark system.

Limitations and Future Work

The authors acknowledge several limitations:

  • Residual Air: In some cylinder combinations, residual air remains in the accumulator, which cannot be fully utilized and leads to some energy waste. This highlights the importance of proper accumulator sizing and matching to the system's requirements.
  • Pressure Requirements: To achieve equivalent output force, the energy-saving system may require higher air supply pressure, potentially increasing the compressor's power consumption.
  • Time for Pressure Acquisition: While the accumulator provides stable pressure, there's a time process involved in achieving this pressure, which could lead to insufficient pressure for the secondary cylinder at the end of the accumulator's deflation stage. This suggests a need for careful accumulator design with some size redundancy.
  • Current Accumulator Limitations: The existing accumulator provides a relatively low supply pressure (around 0.1 MPa). Future research should focus on using better hyperelastic materials or structural designs to achieve higher pressures and greater energy storage capacity.
  • Practical Application: The current research is based on a test bench. Further studies are needed to conduct case studies with real industrial systems to assess actual energy savings in practical scenarios.

Summary updated

Abstract

Exhausted air reuse is one of the most important energy-saving methods for pneumatic actuation systems. However, traditional exhausted air storage tanks have the disadvantages of unstable pressure and low energy density. To solve these problems, this paper presents an energy-saving method by exhausted air reuse for industrial pneumatic actuation systems based on a constant pressure elastic accumulator. Employing the hyperelastic mechanical properties of rubber, a constant pressure energy storage accumulator is designed and applied to a pneumatic circuit for exhausted air recovery and energy saving. In the circuit, the accumulator recovers exhausted air from a primary cylinder and supplies it to another secondary cylinder. Then the secondary cylinder no longer needs air supply from the air compressor to achieve the purpose of energy saving. The energy-saving mathematical model of the circuit is established using air consumption, and the system operation test bed is built to verify the energy-saving efficiency. Results show that the maximum energy-saving efficiency of the system is 54.1% under given working conditions, and the stability of the cylinder can be improved.
BibTeX
@inproceedings{du2022energy,
  author = {Hongwang Du and Wei Liu and Xin Bian and Wei Xiong},
  title = {{Energy-Saving for Industrial Pneumatic Actuation Systems by Exhausted Air Reuse Based on a Constant Pressure Elastic Accumulator}},
  booktitle = {Sustainability},
  year = {2022},
  doi = {10.3390/su14063535},
}
Figure