Energy-carbon efficiency improving strategy for coal mine integrated energy system considering gravity energy storage

Zhao Luo, Yang Zhang, Tao Zhang, Dewen Liu, Xinmin Shen, Jiahao Li, Wei Xu, Yuqin Wang, Qing Li, Xiaopeng Liu, Wenyi Deng, Qidong HeCarbon 2025 · DOI

Abstract

As an energy-intensive heavy industry, the coal mining industry plays a key role in achieving energy conservation and emission reduction. This study presents an energy-carbon efficiency improving strategy aimed at reducing carbon emissions and energy consumption in mining areas by integrating gravity energy storage (GES) with carbon capture and power-to-gas (P2G) technologies. Utilizing the natural topography, abandoned mines can be converted into gravity energy storage systems to stabilize the fluctuating outputs of renewable sources, such as wind power (WP) and Photovoltaic (PV). Concurrently, carbon capture, utilization, and storage (CCUS) technology capture CO₂ in mining areas, which is then transformed into methane using P2G systems. This methane is mixed with low-concentration coalbed methane to create a high-concentration combustible gas, facilitating carbon recycling and a collaborative multi-energy supply. The efficacy of the model was demonstrated through comparative simulations, which showed the utilization rate of renewable energy has increased, leading to a significant reduction in the total cost of the system and carbon emissions.

Introduction: The Challenge of Mining Decarbonization

Coal mining is a notoriously energy-intensive industry that simultaneously generates significant waste resources, including low-concentration coalbed methane, ventilation air methane, and coal gangue. While many mining regions possess high potential for wind and solar energy, the intermittent nature of these renewables makes them difficult to integrate into a stable power supply. Furthermore, the industry faces the challenge of repurposing abandoned mine shafts, which represent a massive but largely untapped spatial resource.

Existing research on Coal Mine Integrated Energy Systems (CMIES) has often struggled to synergize waste energy utilization with large-scale storage and advanced carbon reduction technologies. This paper proposes a novel strategy to address these gaps by coupling gravity energy storage (GES) with carbon capture, utilization, and storage (CCUS) and power-to-gas (P2G) technologies.

Methodology: A Synergistic Energy System

The proposed CMIES framework integrates multiple energy flows—electricity, heat, cooling, carbon, hydrogen, and gas—into a unified optimization model.

Schematic of the proposed Coal Mine Integrated Energy System (CMIES) incorporating GES, CCUS, and P2G technologies.

1. Shaft-Type Gravity Energy Storage (GES)

A core innovation of this study is the mathematical modeling of a GES system that utilizes abandoned mine shafts. By raising and lowering heavy weights, the system stores and releases energy, effectively acting as a large-scale mechanical battery. The model accounts for the complex kinematics of the process, including acceleration, uniform motion, and deceleration phases.

Mechanical model of the shaft-type gravity energy storage system, detailing the phases of motion for the heavy weight.

2. CCUS-P2G Coupling and Carbon Recycling

To further reduce the carbon footprint, the system captures CO₂ from high-emission on-site sources. Excess renewable electricity powers an electrolyzer to produce hydrogen, which is then combined with the captured CO₂ in a methanation reactor. The resulting high-concentration methane is blended with low-grade coalbed methane to create a viable fuel for gas turbines, creating a closed-loop carbon cycle.

3. Low-Carbon Economic Dispatch

The authors formulated an objective function to minimize total daily costs, including energy purchases, operation and maintenance (O&M), carbon sequestration, and penalties for renewable energy curtailment. This is governed by a stepped carbon trading mechanism that financially incentivizes green behavior.

Key Insights and Results

Using real-world data from a mining area in Yunnan, China, the study compared several operational scenarios. The integrated system (GES + CCUS-P2G) demonstrated superior performance across all metrics:

  • Environmental Impact: Daily carbon emissions were reduced from a baseline of 611.45 tons to 402.72 tons.
  • Economic Efficiency: Total daily operating costs dropped from 47.79 × 10⁴ CNY to 29.33 × 10⁴ CNY.
  • Renewable Integration: Wind and solar absorption rates reached 100%, completely eliminating the energy curtailment seen in baseline scenarios.
  • GES Optimization: The study identified a "sweet spot" for GES efficiency. For this specific setup, the optimal mass for the heavy weights was approximately 310,000 tons; exceeding this weight increased costs due to the excessive power required for the motor's acceleration and deceleration phases.

Conclusion and Future Work

This research confirms that optimizing gravity energy storage alongside CCUS-P2G technologies effectively resolves the supply-demand imbalance in mining areas. By repurposing existing infrastructure, the strategy offers a cost-effective path toward a low-carbon transition for the coal sector.

Future work will aim to refine the GES model by incorporating physical friction losses and site-specific geological constraints. Additionally, the researchers plan to explore expanding the system's hydrogen utilization by integrating fuel cell-powered heavy-duty trucks into the mining area's logistics network.

Summary updated

Abstract

Abstract As an energy-intensive heavy industry, the coal mining industry plays a key role in achieving energy conservation and emission reduction. This study presents an energy-carbon efficiency improving strategy aimed at reducing carbon emissions and energy consumption in mining areas by integrating gravity energy storage (GES) with carbon capture and power-to-gas (P2G) technologies. Utilizing the natural topography, abandoned mines can be converted into gravity energy storage systems to stabilize the fluctuating outputs of renewable sources, such as wind power (WP) and Photovoltaic (PV). Concurrently, carbon capture, utilization, and storage (CCUS) technology capture CO₂ in mining areas, which is then transformed into methane using P2G systems. This methane is mixed with low-concentration coalbed methane to create a high-concentration combustible gas, facilitating carbon recycling and a collaborative multi-energy supply. The efficacy of the model was demonstrated through comparative simulations, which showed the utilization rate of renewable energy has increased, leading to a significant reduction in the total cost of the system and carbon emissions. This study confirms that optimizing gravity energy storage with CCUS-P2G effectively resolves the energy supply demand imbalance in mining areas, achieving economic and low-carbon advancements and offering theoretical support for the sector's low-carbon transition.
BibTeX
@inproceedings{luo2025energy,
  author = {Zhao Luo and Yang Zhang and Tao Zhang and Dewen Liu and Xinmin Shen and Jiahao Li and Wei Xu and Yuqin Wang and Qing Li and Xiaopeng Liu and Wenyi Deng and Qidong He},
  title = {{Energy-carbon efficiency improving strategy for coal mine integrated energy system considering gravity energy storage}},
  booktitle = {Carbon},
  year = {2025},
  doi = {10.1007/s43979-025-00147-6},
}
Figure