Encapsulated Silicon Nitride Nanobeam Cavity for Nanophotonics using Layered Materials

Taylor Fryett, Yueyang Chen, James Whitehead, Zane Matthew Peycke, Xiaodong Xu, Arka MajumdarConference 2018 · DOI

TL;DR

Researchers have developed a more robust silicon nitride nanobeam cavity by encapsulating it in a material with a slightly higher refractive index. This design not only improves mechanical stability but also enables efficient coupling with 2D materials like tungsten diselenide, paving the way for advanced hybrid optoelectronic devices.

What Problem Does This Paper Address?

Silicon nitride (SiN) is a promising material for photonic integrated circuits due to its low optical loss and negligible two-photon absorption, making it ideal for high-power applications. However, existing SiN photonic crystal cavities are typically fabricated as suspended membranes. These "floating" membranes are mechanically fragile and susceptible to damage during fabrication and integration processes, especially when transferring other materials like 2D semiconductors. This fragility is a significant hurdle for building robust hybrid optoelectronic platforms that combine SiN photonics with emerging active materials. The paper aims to address this by creating a more mechanically stable SiN nanobeam cavity that can still effectively interact with light and other materials.

Methods

The core innovation lies in the encapsulation of the SiN nanobeam cavity. Instead of leaving the SiN nanobeam suspended in air (low refractive index), the researchers surround it with a material having a refractive index of approximately 1.5. This could be silicon dioxide or PMMA. This encapsulation provides mechanical support.

The design process involved:

  • Band Structure Simulation: Using the MIT Photonic Bands (MPB) software to simulate the band structure of a 1D SiN photonic crystal with a surrounding medium of refractive index 1.5.
  • Cavity Design: Creating a cavity by modifying the dimensions of elliptical holes at the center of the nanobeam, employing a linear tapering technique.
  • Fabrication: Manufacturing the designed SiN nanobeam cavities using standard microfabrication techniques, including LPCVD growth of SiN on thermal oxide, RIE etching, and electron-beam lithography.
  • Encapsulation: Applying a layer of PMMA or silicon dioxide to encapsulate the fabricated SiN nanobeams. PMMA was preferred due to its ease of removal without damaging the nanobeams.
  • 2D Material Integration: Transferring a monolayer of tungsten diselenide (WSe2) onto the encapsulated SiN nanobeam cavities using a dry transfer method with a polycarbonate (PC) stamp.
  • Characterization: Measuring the transmission spectra of the cavities using a supercontinuum light source and probing the optical properties of the hybrid devices. Photoluminescence (PL) measurements were also performed to confirm coupling with the WSe2.

Datasets

Not discussed in the paper. The paper focuses on the design, fabrication, and characterization of a novel photonic device.

Key Insights and Ideas

  • Mechanical Robustness through Encapsulation: Encapsulating the SiN nanobeam cavity in a material with a slightly higher refractive index (around 1.5) significantly improves its mechanical stability, overcoming the fragility of traditional suspended membranes.
  • Trade-off in Q-factor: While encapsulation enhances stability, it slightly increases the mode volume (by a factor of five compared to floating resonators) due to reduced light confinement, leading to a lower theoretical Q-factor (~10^5 vs. higher for ideal floating structures). However, the achieved Q-factors are still substantial (~7000 experimentally).
  • Enabling Hybrid Integration: The robust, encapsulated cavities are ideal for integrating sensitive 2D materials like WSe2. The encapsulation protects the nanobeam during the 2D material transfer process, which often damages fragile suspended structures.
  • New TM Mode Appearance: Encapsulation with PC (used for 2D material transfer) introduces a vertical asymmetry due to its slightly higher refractive index, leading to the appearance of a new TM cavity mode in addition to the primary TE mode. This TM mode, however, is less suitable for coupling with in-plane dipole emitters like monolayer WSe2.
  • Demonstrated Coupling: The paper successfully demonstrates cavity-enhanced photoluminescence from both the WSe2 exciton and defects within the WSe2 monolayer, confirming effective light-matter interaction with the encapsulated nanobeam cavity.

Key Results

  • Theoretical Q-factor: Calculated Q-factor up to ~10^5 with a mode volume of ~2.5 (λ/n)³.
  • Experimental Q-factor: Measured Q-factor up to ~7,000 in transmission for the encapsulated cavities.
  • 2D Material Integration: Successful transfer of monolayer WSe2 onto the encapsulated SiN nanobeam cavities.
  • Cavity-Enhanced PL: Observed enhanced photoluminescence from WSe2 exciton and defects, indicating successful coupling.
  • Telecommunication Band Resonators: Fabricated encapsulated resonators for the 1550 nm telecommunication band with Q-factors around ~10,000.

Limitations and Future Work

  • Q-factor Reduction: The encapsulation, while providing stability, leads to a slightly larger mode volume and thus a reduced Q-factor compared to ideal suspended resonators. The authors attribute the experimentally measured Q-factors (1,500-7,000) to fabrication imperfections, which are lower than theoretical predictions.
  • New TM Mode: The appearance of an unwanted TM mode due to vertical asymmetry introduced by the PC layer during 2D material transfer is noted. While this mode doesn't couple well with in-plane emitters, its presence needs to be managed for specific applications.
  • Future Work: The authors envision using these encapsulated SiN nanobeam resonators to enhance light-matter interaction with other emerging nanomaterials, such as solution-processed emitters, chromophores, and perovskite light sources. They believe these resonators will be a valuable tool for developing hybrid, large-scale photonic integrated circuits for applications in optical information science and sensing. Further optimization to improve the Q-factor and control mode properties would be beneficial.

Summary updated

Abstract

The fragile nature of floating membrane resonators poses a serious problem for constructing a hybrid photonics platform. To overcome this challenge, we design and demonstrate encapsulated silicon nitride nanobeams and demonstrate coupling to layered materials.
BibTeX
@inproceedings{fryett2018encapsulated,
  author = {Taylor Fryett and Yueyang Chen and James Whitehead and Zane Matthew Peycke and Xiaodong Xu and Arka Majumdar},
  title = {{Encapsulated Silicon Nitride Nanobeam Cavity for Nanophotonics using Layered Materials}},
  booktitle = {Conference},
  year = {2018},
  doi = {10.1364/cleo\_at.2018.jw2a.16},
}
Figure