Enabling Wireless Power Transfer (WPT) in Pinching Antenna Systems (PASS)

Deqiao Gan, Xiaoxia Xu, Xiaohu Ge, Yue Liu, Yuanwei LiuarXiv 2025 · DOI · arXiv

TL;DR

This paper introduces a flexible wireless power transfer (WPT) framework using Pinching Antenna Systems (PASS), which utilize movable antennas on dielectric waveguides to bring power and data closer to users. By jointly optimizing antenna positions, beamforming, and—crucially—the power radiation ratios of each antenna, the authors achieve massive gains in both energy harvesting efficiency (up to 81%) and data rates (up to 77%) compared to conventional rigid MIMO systems.

What Problem Does This Paper Address?

As we move toward 6G and high-frequency bands like millimeter-wave (mmWave) and Terahertz (THz), wireless signals face two major hurdles: severe propagation loss and extreme sensitivity to blockages. Traditional Massive MIMO systems use rigid antenna arrays to overcome this via directional beamforming, but their fixed structure makes them poorly suited for mobile users or dynamic environments.

In the context of Wireless Power Transfer (WPT), where we want to charge IoT devices or sensors remotely, these losses are even more critical. Efficiency drops off rapidly with distance. While "movable antennas" have been proposed before, the Pinching Antenna System (PASS) offers a unique solution: antennas (PAs) that can be dynamically activated and repositioned along a dielectric waveguide. However, previous PASS research focused only on communication and assumed every antenna radiated power equally. This paper addresses the challenge of balancing high-efficiency power delivery (for energy harvesters) with high-speed data transmission (for information receivers) by treating the antenna's radiation ratio as a controllable variable.

Methods

The authors propose a bi-level optimization framework to handle the complex coupling between where the antennas are, how they are beamformed, and how much power each one "leaks" out of the waveguide.

  1. Upper Level: Focuses on maximizing Power Conversion Efficiency (PCE). It jointly optimizes transmit beamforming, PA positions, and a "feasible interval" for power radiation ratios while ensuring users meet a minimum data rate.
  2. Lower Level: Refines the power radiation ratios within that feasible interval to maximize the total system data rate (sum rate).

To solve these, they developed two distinct algorithmic approaches:

  • Two-User Scenario: Uses an Alternating Optimization (AO) approach combined with Weighted Minimum Mean Square Error (WMMSE) to find stationary solutions for beamforming and positioning.
  • Multi-User Scenario: Employs a more sophisticated Quadratic Transform-Lagrangian Dual Transform (QT-LDT) algorithm. This allows them to break down non-convex fractional problems into manageable, convex sub-problems that converge to closed-form solutions.

Datasets

This is a theoretical and computational study; therefore, no external real-world datasets were used. The framework was evaluated using numerical Monte-Carlo simulations. The simulation parameters (e.g., 28 GHz carrier frequency, specific waveguide refractive indices, and rectangular service areas) are standard for high-frequency wireless research.

Key Insights and Ideas

  • The "Pinching" Advantage: Unlike fixed arrays, PASS can move antennas to create the best possible Line-of-Sight (LoS) path to a user. This significantly reduces path loss, which is the "killer" of efficient wireless charging.
  • Radiation Ratio as a Control Knob: The "aha moment" here is that not every antenna should radiate the same amount of power. By tuning the spacing between the waveguide and the antenna pinch, the system can "sip" power for communication or "gulp" it for high-efficiency charging, depending on the user's proximity and needs.
  • Taming Complexity: The coupling between antenna position and beamforming is mathematically "messy." The bi-level approach effectively decouples these variables, allowing the system to prioritize energy harvesting (which is more sensitive to hardware configuration) before fine-tuning for data rates.

Key Results

The proposed PASS-WPT framework was compared against conventional Massive MIMO and a baseline PASS system with fixed radiation ratios.

  • Energy Efficiency: The framework achieved an 81.45% improvement in PCE for energy harvesting receivers compared to conventional MIMO, and a 43.19% improvement over baseline PASS.
  • Data Throughput: It increased the sum rate by 77.81% over MIMO and 31.91% over baseline PASS.
  • Convergence: The algorithms are highly efficient, with the PASS-WPT model converging to a steady state in roughly 5 iterations, compared to 8 or more for standard MIMO approaches.
  • Power Savings: At high SNR requirements (32 dB), PASS-WPT reduced average power consumption by 16.82% compared to MIMO.

Limitations and Future Work

  • LoS Dominance: The study assumes a Line-of-Sight (LoS) dominant environment. While PASS is designed to mitigate blockages, the performance in highly cluttered, Non-Line-of-Sight (NLoS) multipath environments remains to be fully explored.
  • Hardware Complexity: While the math works, the physical implementation of waveguides with high-speed, precision-movable "pinches" presents significant mechanical and materials science challenges.
  • Mobility: The current model assumes receivers are stationary during the optimization window. Future work could look at real-time tracking of high-speed mobile devices.

Summary updated

Abstract

A novel pinching antenna system (PASS) enabled wireless power transfer (WPT) framework is proposed, where energy harvesting receivers (EHRs) and information decoding receivers (IDRs) coexist. By activating pinching antennas (PAs) near both receivers and flexibly adjusting PAs' power radiation ratios, both energy harvesting efficiency and communication quality can be enhanced. A bi-level optimization problem is formulated to overcome the strong coupling between optimization variables. The upper level jointly optimizes transmit beamforming, PA positions, and feasible interval of power radiation ratios for power conversion efficiency (PCE) maximization under rate requirements, while the lower level refines power radiation ratio for the sum rate maximization. Efficient solutions are developed for both two-user and multi-user scenarios. 1) For the two-user case, where an EHR and an IDR coexist, the alternating optimization (AO)-based and weighted minimum mean square error (WMMSE)-based algorithms are developed to achieve the stationary solutions of transmit beamforming, PA positions, and power radiation ratios. 2) For the multi-user case, a quadratic transform-Lagrangian dual transform (QT-LDT) algorithm is proposed to iteratively update PCE and sum rate by optimizing PA positions and power radiation ratios individually. Closed-form solutions are derived for both maximization problems. Numerical simulation results demonstrate that the proposed PASS-WPT framework significantly outperforms conventional MIMO and the baseline PASS with fixed power radiation, which demonstrates that: i) Compared to the conventional MIMO and baseline PASS, the proposed PASS-WPT framework achieves 81.45% and 43.19% improvements in PCE of EHRs, and ii) also increases the sum rate by 77.81% and 31.91% for IDRs.
BibTeX
@misc{gan2025enabling,
  author = {Deqiao Gan and Xiaoxia Xu and Xiaohu Ge and Yue Liu and Yuanwei Liu},
  title = {{Enabling Wireless Power Transfer (WPT) in Pinching Antenna Systems (PASS)}},
  year = {2025},
  eprint = {2511.11465},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2511.11465},
  howpublished = {arXiv},
}
Figure