Enabling Digital Twin in Vehicular Edge Computing: A Multi-Agent Multi-Objective Deep Reinforcement Learning Solution

Xincao Xu, Kai Liu, Penglin Dai, Biwen ChenarXiv 2022 · OpenReview

TL;DR

This paper tackles the challenge of creating accurate digital twins of vehicular environments in real-time by optimizing cooperative sensing and data uploading strategies. They propose a novel multi-agent deep reinforcement learning approach that balances the quality of these digital twins with the associated costs, outperforming existing methods.

What Problem Does This Paper Address?

Modern vehicles are increasingly equipped with sophisticated sensors, and advancements in wireless communication and edge computing are paving the way for "vehicular edge computing" (VEC). This enables the creation of "digital twins" (DTs) – virtual replicas of the physical vehicular environment. These DTs are crucial for intelligent transportation systems (ITS) applications, offering a real-time logical view of vehicles, pedestrians, and infrastructure. However, building high-quality DTs presents several challenges:

  • Dynamic Environment: Vehicular environments are constantly changing, making it difficult to maintain up-to-date DTs.
  • Information Heterogeneity: Data comes from various sensors with different frequencies and modalities, and can be redundant or inconsistent across vehicles.
  • Quality-Cost Tradeoff: Achieving high-quality DTs (timely, consistent information) requires significant sensing and communication resources, leading to high costs.

This paper aims to address the critical need for a solution that can achieve a balance between the quality of the digital twin and the cost of sensing and uploading information in a cooperative manner within VEC systems.

Methods

The authors propose a novel architecture for Digital Twins in Vehicular Edge Computing (DT-VEC) that leverages cooperative sensing and Vehicle-to-Infrastructure (V2I) uploading. The core of their solution lies in a Multi-Agent Multi-Objective Deep Reinforcement Learning (MAMO-DRL) framework.

Here's a breakdown of their approach:

  • DT-VEC Architecture: Vehicles sense heterogeneous information (e.g., from LiDAR, cameras) and upload it to edge nodes via V2I. These edge nodes then construct digital twins by fusing this information.
  • Cooperative Sensing and Uploading Models: They develop mathematical models for cooperative sensing (considering timeliness, consistency, redundancy, and sensing cost) and V2I uploading (considering transmission cost and bandwidth).
  • Bi-Objective Problem Formulation: The problem is framed as a bi-objective optimization task: maximizing the system quality (timeliness and consistency of the digital twin) and minimizing the system cost (redundancy, sensing, and transmission costs).
  • MAMO-DRL Solution:
    • Multi-Agent System: Vehicles and edge nodes act as independent agents.
  • Distributed Execution: Vehicles and edge nodes make decisions locally based on their observations.
  • Dueling Critic Network: A novel dueling critic network is employed to evaluate agent actions by considering both the value of the state and the advantage of the action. This helps in more accurate reward estimation.
  • Action Space: Vehicles decide what information to sense, at what frequency, its uploading priority, and their transmission power. Edge nodes decide on V2I bandwidth allocation.
  • Reward Mechanism: A difference reward mechanism is used for vehicles, and a normalized reward is used for the edge node.

Datasets

The authors used real-world vehicular trajectories from the Didi GAIA open dataset for their simulations. They did not introduce new benchmarks but rather used this existing dataset to evaluate their proposed solution against others in a realistic traffic environment.

Key Insights and Ideas

  • Cooperation is Key: The paper strongly emphasizes that cooperative sensing and uploading among vehicles are essential for efficient DT construction in VEC. This allows for better resource utilization and reduced redundancy.
  • MAMO-DRL for Tradeoffs: The MAMO-DRL approach is shown to be highly effective in navigating complex multi-objective problems like the quality-cost tradeoff in DT-VEC. The ability to learn distributed policies that consider multiple objectives simultaneously is a significant advantage.
  • Dueling Critic Network's Value: The use of a dueling critic network appears to enhance the learning process by providing a more nuanced evaluation of agent actions, leading to better policy optimization.
  • Novel Metrics for Evaluation: The introduction of "Quality per Unit Cost" (QPUC) and "Profit per Unit Quality" (PPUQ) provides a more comprehensive way to evaluate the performance of algorithms in balancing quality and cost, going beyond traditional metrics.

Key Results

The proposed MAMO solution demonstrated superior performance compared to baseline algorithms (RA, D4PG, MAD4PG) across various scenarios:

  • QPUC Improvement: MAMO achieved significantly higher QPUC, with improvements of around 494.1% over RA, 85.5% over D4PG, and 428.8% over MAD4PG after convergence.
  • PPUQ Improvement: Similarly, MAMO showed substantial gains in PPUQ, with improvements of approximately 30.6% over RA, 14.2% over D4PG, and 40.7% over MAD4PG.
  • Simultaneous Optimization: Notably, MAMO was the only solution that could improve both QPUC and PPUQ simultaneously, highlighting its effectiveness in achieving the desired tradeoff.
  • Performance Across Scenarios: The algorithm consistently outperformed others under varying traffic scenarios and V2I bandwidth conditions, demonstrating its robustness.
  • Efficiency: MAMO also achieved lower Average Sensing Cost (ASC) and Average Transmission Cost (ATC), indicating more efficient resource utilization.

Limitations and Future Work

  • Limitations:
    • The paper acknowledges that the performance difference in Average Timeliness (AT) between MAMO and D4PG becomes small when bandwidth increases significantly, suggesting that bandwidth alone has diminishing returns on timeliness beyond a certain point.
  • The study is based on simulations, and real-world deployment might introduce additional complexities.
  • Future Work:
    • The authors suggest investigating the cooperation among edge nodes to further enhance overall system performance.
  • They also express interest in implementing the solution in a real-world testbed to validate its capabilities in actual vehicular network environments.

Summary updated

Abstract

Recent advances in sensing technologies, wireless communications, and computing paradigms drive the evolution of vehicles in becoming an intelligent and electronic consumer products. This paper investigates enabling digital twins in vehicular edge computing (DT-VEC) via cooperative sensing and uploading, and makes the first attempt to achieve the quality-cost tradeoff in DT-VEC. First, a DT-VEC architecture is presented, where the heterogeneous information can be sensed by vehicles and uploaded to the edge node via vehicle-to-infrastructure (V2I) communications. The digital twins are modeled based on the sensed information, which are utilized to from the logical view to reflect the real-time status of the physical vehicular environment. Second, we derive the cooperative sensing model and the V2I uploading model by considering the timeliness and consistency of digital twins, and the redundancy, sensing cost, and transmission cost. On this basis, a bi-objective problem is formulated to maximize the system quality and minimize the system cost. Third, we propose a solution based on multi-agent multi-objective (MAMO) deep reinforcement learning, where a dueling critic network is proposed to evaluate the agent action based on the value of state and the advantage of action. Finally, we give a comprehensive performance evaluation, demonstrating the superiority of MAMO.
BibTeX
@misc{xu2022enabling,
  author = {Xincao Xu and Kai Liu and Penglin Dai and Biwen Chen},
  title = {{Enabling Digital Twin in Vehicular Edge Computing: A Multi-Agent Multi-Objective Deep Reinforcement Learning Solution}},
  year = {2022},
  eprint = {2210.17386},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2210.17386},
}
Figure