Electroplated indium bump arrays and the bonding reliability

Qiuping Huang, Gaowei Xu, Gang Quan, Yuan Yuan, Le LuoJournal of Semiconductors 2010 · DOI

Abstract

A novel electroplating indium bumping process is described, as a result of which indium bump arrays with a pitch of 100 μm and a diameter of 40 μm were successfully prepared. UBM (under bump metallization) for indium bumping was investigated with an XRD technique. The experimental results indicate that Ti/Pt (300 Å / 200 Å) has an excellent barrier effect both at room temperature and at 200 °C. The bonding reliability of the indium bumps was evaluated by a shear test. Results show that the shear strength of the indium bump significantly increases after the first reflow and then changes slowly with increasing reflow times. Such a phenomenon may be caused by the change in textures of the indium after reflow. The corresponding flip-chip process is also discussed in this paper.
BibTeX
@article{huang2010electroplated,
  author = {Qiuping Huang and Gaowei Xu and Gang Quan and Yuan Yuan and Le Luo},
  title = {{Electroplated indium bump arrays and the bonding reliability}},
  journal = {Journal of Semiconductors},
  year = {2010},
  doi = {10.1088/1674-4926/31/11/116004},
}

Loading related content...

Figure