Electronic Modulation of the 3D Architectured Ni/Fe Oxyhydroxide Anchored N-Doped Carbon Aerogel with Much Improved OER Activity

Jiaxin Lu, Wenke Hao, Xiaodong Wu, Xiaodong Shen, Sheng Cui, Wenyan ShiGels 2023 · DOI

TL;DR

Researchers have developed a novel nitrogen-doped carbon aerogel (NCA) decorated with Ni/Fe oxyhydroxide nanoparticles for the oxygen evolution reaction (OER). This material exhibits significantly improved OER activity and stability compared to commercial RuO2, offering a promising low-cost alternative for energy storage and conversion.

What Problem Does This Paper Address?

The efficient and cost-effective production of hydrogen through water electrolysis is crucial for a sustainable energy future. A key bottleneck in this process is the oxygen evolution reaction (OER), which is kinetically sluggish and requires highly efficient catalysts. While noble metal-based catalysts like RuO2 and IrO2 are effective, their scarcity and high cost limit widespread adoption. Therefore, there's a pressing need for non-precious metal catalysts that can match or exceed the performance of these precious metals. This paper tackles this challenge by designing a composite material that leverages the synergistic effects of a porous carbon support and earth-abundant transition metals.

Methods

The researchers employed a facile sol-gel method to synthesize the Ni/Fe oxyhydroxide anchored on nitrogen-doped carbon aerogel (NiFeOx(OH)y@NCA). This involved creating a gel from resorcinol and formaldehyde, incorporating Ni/Fe metal salts, and then drying and carbonizing the structure.

Key characterization techniques included:

  • X-ray Diffraction (XRD): To analyze the crystalline phases and structural properties.
  • Raman Spectroscopy: To assess the carbon structure and graphitization.
  • Nitrogen Adsorption-Desorption Isotherms and BJH Analysis: To determine the BET surface area, pore volume, and pore size distribution, crucial for understanding the aerogel's porous architecture.
  • Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM): To visualize the morphology, nanoparticle distribution, and the anchoring of Ni/Fe oxyhydroxide on the carbon aerogel.
  • X-ray Photoelectron Spectroscopy (XPS): To investigate the surface chemical composition, elemental states, and electronic interactions between Ni, Fe, C, and N.
  • Electrochemical Measurements: Including Linear Sweep Voltammetry (LSV) to evaluate overpotential and Tafel slope, Cyclic Voltammetry (CV) to determine double-layer capacitance (related to electrochemically active surface area or ECSA), and Electrochemical Impedance Spectroscopy (EIS) to assess charge transfer resistance.
  • Density Functional Theory (DFT) Calculations: To gain fundamental insights into the electronic structure, interfacial charge transfer, and the role of the NCA support in modulating the OER performance.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel material and its performance evaluation.

Key Insights and Ideas

  • Synergistic Effect of NCA and Ni/Fe Oxyhydroxide: The combination of the N-doped carbon aerogel (NCA) and Ni/Fe oxyhydroxide is crucial. The NCA provides a high surface area, excellent conductivity, and a porous framework for ion transport, while the Ni/Fe oxyhydroxide acts as the active catalytic component.
  • Electronic Modulation by NCA: DFT calculations revealed that the NCA significantly alters the electronic structure of the Ni/Fe oxyhydroxide. Specifically, it shifts the d-band center of Ni and Fe atoms, which is known to tune the binding energy of reaction intermediates, thereby accelerating the OER kinetics.
  • Optimized Ni/Fe Ratio: The study explored various Ni/Fe molar ratios, identifying an optimal composition (Ni7FeOx(OH)y@NCA) that balances the catalytic activity of both metals and the structural benefits of the aerogel.
  • Aerogel Architecture is Key: The 3D porous aerogel structure is not just a passive support; it actively contributes by providing abundant active sites, facilitating electrolyte diffusion, and enhancing electron transfer pathways.
  • Fe as the Primary Active Site: LSV analysis suggested that the Fe component plays a more critical role in OER activity compared to Ni alone.

Key Results

  • Superior OER Performance: The optimized Ni7FeOx(OH)y@NCA catalyst achieved a low overpotential of 304 mV at 10 mA·cm⁻², a small Tafel slope of 72 mV·dec⁻¹, and excellent stability over 2000 CV cycles.
  • Outperforms RuO2: The catalyst's performance was superior to that of commercial RuO2 in terms of overpotential.
  • High Surface Area: The material exhibited a large BET specific surface area of 231.16 m²·g⁻¹.
  • Enhanced ECSA: The double-layer capacitance measurements indicated a significantly larger electrochemically active surface area for the optimized catalyst compared to its counterparts and RuO2.
  • Improved Conductivity: The integration of NCA improved the electrical conductivity of the Ni/Fe oxyhydroxide, facilitating faster charge transfer.

Limitations and Future Work

  • Limited Exploration of Other Electrolytes: The study focused on alkaline media (1 M KOH). Further investigation into performance in neutral or acidic electrolytes would broaden its applicability.
  • Long-Term Durability Under High Current Densities: While stability over 2000 CV cycles is good, testing at higher current densities relevant for industrial applications would be beneficial.
  • Scalability of Synthesis: While the sol-gel method is described as facile, the scalability of producing these aerogels for industrial applications would need to be addressed.
  • Further Mechanistic Studies: While DFT provided valuable insights, more detailed in-situ/operando studies could further elucidate the reaction mechanisms and the role of specific active sites.

The authors suggest that this work provides a new strategy for designing advanced aerogel-based electrocatalysts by tuning electronic structures, paving the way for low-cost and highly efficient energy conversion and storage devices.

Summary updated

Abstract

It remains a big challenge to develop non-precious metal catalysts for oxygen evolution reaction (OER) in energy storage and conversion systems. Herein, a facile and cost-effective strategy is employed to in situ prepare the Ni/Fe oxyhydroxide anchored on nitrogen-doped carbon aerogel (NiFeO<sub>x</sub>(OH)<sub>y</sub>@NCA) for OER electrocatalysis. The as-prepared electrocatalyst displays a typical aerogel porous structure composed of interconnected nanoparticles with a large BET specific surface area of 231.16 m<sup>2</sup>·g<sup>-1</sup>. In addition, the resulting NiFeO<sub>x</sub>(OH)<sub>y</sub>@NCA exhibits excellent OER performance with a low overpotential of 304 mV at 10 mA·cm<sup>-2</sup>, a small Tafel slope of 72 mV·dec<sup>-1</sup>, and excellent stability after 2000 CV cycles, which is superior to the commercial RuO<sub>2</sub> catalyst. The much enhanced OER performance is mainly derived from the abundant active sites, the high electrical conductivity of the Ni/Fe oxyhydroxide, and the efficient electronic transfer of the NCA structure. Density functional theory (DFT) calculations reveal that the introduction of the NCA regulates the surface electronic structure of Ni/Fe oxyhydroxide and increases the binding energy of intermediates as indicated by the d-band center theory. This work provides a new method for the construction of advanced aerogel-based materials for energy conversion and storage.
BibTeX
@inproceedings{lu2023electronic,
  author = {Jiaxin Lu and Wenke Hao and Xiaodong Wu and Xiaodong Shen and Sheng Cui and Wenyan Shi},
  title = {{Electronic Modulation of the 3D Architectured Ni/Fe Oxyhydroxide Anchored N-Doped Carbon Aerogel with Much Improved OER Activity}},
  booktitle = {Gels},
  year = {2023},
  doi = {10.3390/gels9030190},
}
Figure