Electron spin manipulation and readout through an optical fiber

И. В. Федотов, Lyubov V. Amitonova, A. A. Voronin, A. O. Levchenko, S. A. Zibrov, D. A. Sidorov‐Biryukov, A. B. Fedotov, V. L. Velichansky, А. М. ЖелтиковScientific 2014 · DOI

Abstract

The electron spin of nitrogen-vacancy (NV) centers in diamond offers a solid-state quantum bit and enables high-precision magnetic-field sensing on the nanoscale. Implementation of these approaches in a fiber format would offer unique opportunities for a broad range of technologies ranging from quantum information to neuroscience and bioimaging. Here, we demonstrate an ultracompact fiber-optic probe where a diamond microcrystal with a well-defined orientation of spin quantization NV axes is attached to the fiber tip, allowing the electron spins of NV centers to be manipulated, polarized, and read out through a fiber-optic waveguide integrated with a two-wire microwave transmission line. The microwave field transmitted through this line is used to manipulate the orientation of electron spins in NV centers through the electron-spin resonance tuned by an external magnetic field. The electron spin is then optically initialized and read out, with the initializing laser radiation and the photoluminescence spin-readout return from NV centers delivered by the same optical fiber.

Introduction: The Promise of NV-Center Sensing

Nitrogen-vacancy (NV) centers in diamond are atomic-scale defects that function as robust quantum bits at room temperature. Their spin states are exceptionally sensitive to environmental factors such as magnetic fields, temperature, and strain, making them premier candidates for nanoscale magnetometry. However, traditional NV-sensing setups rely on bulky, stationary confocal microscopes to manage laser delivery and signal collection. To transition this technology into field applications—such as in vivo neural monitoring or industrial magnetic sensing—miniaturization and flexibility are paramount.

NV center structure and energy levels. (b) Lattice structure showing the nitrogen atom (N) and vacancy (V). (c) Photoluminescence (PL) spectrum and the corresponding energy level diagram for spin manipulation.

Design and Methodology: A Hybrid Fiber-Optic Platform

The researchers developed an ultracompact "lab-on-a-tip" by integrating three essential components into a single fiber-optic probe:

  1. Optical Waveguide: A multimode optical fiber (200 μm core) serves as a bidirectional path. It delivers a 532 nm green laser to initialize the NV spins and collects the resulting red photoluminescence (PL) for readout.
  2. Microwave Integration: A two-wire microwave transmission line, consisting of 50 μm copper wires, runs along the fiber. At the tip, these wires form a loop around the diamond, generating the localized microwave field necessary for electron spin resonance (ESR).
  3. Diamond Microcrystal: A single diamond microcrystal (~250 μm) is attached to the fiber tip. Using a single crystal rather than diamond powder ensures a well-defined orientation of the NV quantization axes, which is critical for vector magnetometry.
Fabrication and light collection. (d-h) Micrographs showing the attachment of the diamond and microwave wires to the fiber tip. (i-j) Simulations of the light collection efficiency at the fiber-diamond interface.

The system operates via Optically Detected Magnetic Resonance (ODMR). By sweeping the microwave frequency and monitoring PL intensity, the probe identifies spin-flip frequencies that shift in response to external magnetic fields (the Zeeman effect).

Key Results and Insights

The integration of the microwave line directly onto the fiber is a significant advancement, creating a truly self-contained "plug-and-play" quantum sensor. Key findings include:

  • Vector Magnetometry: The fixed orientation of the diamond crystal allowed the researchers to resolve four distinct pairs of Zeeman-shifted peaks, enabling the calculation of both the magnitude and 3D orientation of the magnetic field.
  • Experimental Validation: The probe successfully measured magnetic fields from 0.8 mT to 5 mT. The experimental frequency shifts showed excellent linearity, matching theoretical Zeeman splitting models perfectly.
  • Efficiency Trade-offs: While the fiber's light collection efficiency (~1%) is lower than that of a laboratory microscope (~28%), the study proves it is sufficient for high-fidelity readout, prioritizing portability and access over raw sensitivity.

Conclusion and Future Directions

This work establishes the foundational elements for fiber-based ESR magnetometry. While the current "continuous-wave" measurements provide a proof of concept, future iterations could enhance sensitivity by implementing pulsed spin-echo sequences. Additionally, optimizing microwave impedance and ensuring biocompatibility will be essential for applications in neuroscience and medical diagnostics. This platform represents a major step toward deploying quantum sensors in complex, hard-to-reach environments.

Summary updated

Abstract

The electron spin of nitrogen--vacancy (NV) centers in diamond offers a solid-state quantum bit and enables high-precision magnetic-field sensing on the nanoscale. Implementation of these approaches in a fiber format would offer unique opportunities for a broad range of technologies ranging from quantum information to neuroscience and bioimaging. Here, we demonstrate an ultracompact fiber-optic probe where a diamond microcrystal with a well-defined orientation of spin quantization NV axes is attached to the fiber tip, allowing the electron spins of NV centers to be manipulated, polarized, and read out through a fiber-optic waveguide integrated with a two-wire microwave transmission line. The microwave field transmitted through this line is used to manipulate the orientation of electron spins in NV centers through the electron-spin resonance tuned by an external magnetic field. The electron spin is then optically initialized and read out, with the initializing laser radiation and the photoluminescence spin-readout return from NV centers delivered by the same optical fiber.
BibTeX
@inproceedings{2014electron,
  author = {И. В. Федотов and Lyubov V. Amitonova and A. A. Voronin and A. O. Levchenko and S. A. Zibrov and D. A. Sidorov‐Biryukov and A. B. Fedotov and V. L. Velichansky and А. М. Желтиков},
  title = {{Electron spin manipulation and readout through an optical fiber}},
  booktitle = {Scientific},
  year = {2014},
  doi = {10.1038/srep05362},
}
Figure