Electromagnetic design of a 12 T twin-aperture dipole magnet

Chengtao Wang, Ershuai Kong, Cheng Da, Yingzhe Wang, Kai Zhang, Qingjin XuInternational Journal of Modern Physics A 2017 · DOI

Abstract

A 12 T twin-aperture subscale magnet is under development at the Institute of High Energy Physics (IHEP, Beijing, China), as the R&D of high-field accelerator magnet technology for SPPC (Super Proton–Proton Collider) pre-study. Four NbTi coils and two Nb 3 Sn coils will be fabricated firstly, to provide a 12 T dipole field in two apertures with the load line ratio of 20% at 4.2 K. After that, the HTS (ReBCO and Bi-2212) coils will be inserted between the Nb 3 Sn coils to realize a higher dipole field. The ReBCO coils with the block-type configuration will be inserted between the Nb 3 Sn coils with common-coil configuration (Combined Common-coil and Block type configuration, CCB), to make the broad plane of the tape parallel with the magnetic flux and maximize current-carrying capacity. The electromagnetic design, mechanical design and quench protection design have been completed. The fabrication is ongoing. The magnet will be assembled and tested in 2017.
BibTeX
@article{wang2017electromagnetic,
  author = {Chengtao Wang and Ershuai Kong and Cheng Da and Yingzhe Wang and Kai Zhang and Qingjin Xu},
  title = {{Electromagnetic design of a 12 T twin-aperture dipole magnet}},
  journal = {International Journal of Modern Physics A},
  year = {2017},
  doi = {10.1142/s0217751x17460083},
}

Loading related content...

Figure