Abstract
Bismuth-Antimony (Bi-Sb) alloys are significant narrow-gap semiconductors with applications in thermoelectric cooling and topological physics. This study explores the effect of Arsenic (As) doping on the $(Bi_{0.85}Sb_{0.15})_{1-x}As_x$ system. Through structural analysis and low-temperature transport measurements, we demonstrate that adding 5% Arsenic induces a transition from semiconducting to metallic behavior. Infrared spectroscopy identifies the emergence of "band tails"—disordered electronic states extending into the bandgap—which remain delocalized, supporting metallic conductivity.
Introduction
Bismuth-Antimony alloys, particularly at a ratio of 85:15, are narrow-gap semiconductors ($∼$30 meV) of great interest for low-temperature thermoelectrics and as 3D topological insulators. The electronic properties of these materials are highly sensitive to chemical composition. This research investigates how isoelectronic doping with Arsenic (As), which has a smaller atomic radius than Bi or Sb, influences the band structure and charge carrier dynamics. The primary goal is to determine whether the resulting structural disorder leads to electron localization or maintains a metallic state.
Experimental Methods
Samples of $(Bi_{0.85}Sb_{0.15})_{1-x}As_x$ ($x = 0, 0.05, 0.08, 0.10$) were synthesized via a vacuum-sealed melting method followed by slow cooling to ensure homogeneity. Structural integrity was verified using X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDS). DC resistivity was measured from 300 K down to 12 K using a four-probe technique. Optical properties were probed via infrared reflectance spectroscopy (30–15,000 cm⁻¹), with optical conductivity derived through Kramers-Kronig analysis.
Structural Characterization
XRD analysis confirmed that the alloys maintain the $R\bar{3}m$ space group symmetry. As expected, the introduction of smaller As atoms leads to a contraction of the lattice parameters as the concentration increases.
SEM and EDS mapping were employed to assess the surface morphology and elemental distribution. The results indicated a uniform distribution of Bi, Sb, and As within the solubility limit (approximately $x \le 0.08$), confirming the homogeneity of the synthesized alloys.
Electronic Transport and Optical Properties
The undoped parent material ($Bi_{0.85}Sb_{0.15}$) exhibits typical semiconducting behavior, with resistivity increasing as temperature decreases. In contrast, the $x = 0.05$ sample shows metallic behavior across the entire 12–300 K range. At 300 K, all samples have similar resistivity (~0.2 mΩ·cm), but at low temperatures, the 5% As sample reaches a residual resistivity of ~0.08 mΩ·cm.
Infrared spectroscopy provided deeper insight into this transition. In the parent material, the plasma edge shifts to lower frequencies upon cooling, indicating carrier "freeze-out." However, the As-doped samples maintain a robust plasma edge. The mid-infrared conductivity of the $x = 0.05$ sample is notably higher than the parent material, attributed to the formation of "band tails." These states leak into the forbidden gap due to structural disorder but remain delocalized, allowing the Fermi level to reside within extended states and facilitating metallic transport.
Conclusion
Arsenic doping in $(Bi_{0.85}Sb_{0.15})_{1-x}As_x$ successfully tunes the material from a semiconductor to a metal at 5% concentration. The study highlights that while As introduces significant scattering and structural disorder, it creates delocalized band tails rather than localized insulating states. Future work should investigate the impact of these band tails on the thermoelectric Seebeck coefficient and address the volatility of Arsenic during synthesis to achieve more precise compositional control.
Summary updated